PYQ Vault

Day 509: JEE Mains Physics

5 questions. Try each one first, then open its answer.

  1. Question 1

    Mechanical Properties of Fluids. Asked once: 10 Apr 2023

    14
    Given below are two statements: Statement I: Pressure in a reservoir of water is same at all points at the same level of water. Statement II: The pressure applied to enclosed water is transmitted in all directions equally. In the light of the above statements, choose the correct answer from the options given below:

    Tap an option to check your answer.

  2. Question 2

    Mechanical Properties of Solids. Asked once: 2021 Paper 6

    12
    In order to determine the Young's Modulus of a wire of radius 0.2 cm0.2\text{ }cm (measured using a scale of least count =0.001 cm= 0.001\text{ }cm ) and length 1 m1\text{ }m (measured using a scale of least count =1 mm= 1\text{ }mm ), a weight of mass 1 kg1\text{ }kg (measured using a scale of least count =1 g= 1\text{ }g ) was hanged to get the elongation of 0.5 cm0.5\text{ }cm (measured using a scale of least count 0.001 cm0.001\text{ }cm ). What will be the fractional error in the value of Young's Modulus determined by this experiment?

    Tap an option to check your answer.

  3. Question 3

    Motion in a Plane. Asked once: 30 Jan 2024

    110
    Projectiles AA and BB are thrown at angles of 45∘45^{\circ} and 60∘60^{\circ} with vertical respectively from top of a 400 m400\text{ }m high tower. If their ranges and times of flight are same, the ratio of their speeds of projection vA:vBv_{A}:v_{B} is:

    Tap an option to check your answer.

  4. Question 4

    Motion in a Straight Line. Asked once: 29 Jan 2024

    6
    A body starts moving from rest with constant acceleration covers displacement S1S_{1} in first (p−1(p - 1 ) seconds and S2S_{2} in first pp seconds. The displacement S1+S2S_{1}+S_{2} will be made in time:

    Tap an option to check your answer.

  5. Question 5

    Moving Charges and Magnetism. Asked once: 6 Apr 2023

    106
    A student is provided with a variable voltage source V, a test resistor Rr=10ΩR_{r}= 10\Omega, two identical galvanometers G1G_{1} and G2G_{2} and two additional resistors, R1=10MΩR_{1}= 10M\Omega and R2=0.001ΩR_{2}= 0.001\Omega. For conducting an experiment to verify ohms law, the most suitable circuit is:

    Tap an option to check your answer.