PYQ Vault

Mechanical Properties of Fluids

NEET Physics. Try each one first, then open its answer.

Top 10 NEET PYQs to practise first

The questions and kinds of question asked most often come first. Each one says how often and in which papers.

  1. Question 1

    This type asked 2 times: NEET 2021, Re-NEET 2026. This one: Re-NEET 2026 See all 2 of this type

    12
    In the measurement of viscosity of liquids using terminal velocity experiment, spherical balls of same radius but having different densities are used. The variation of the terminal velocity (v) with the ratio of density of spherical ball (σ\sigma) to density of the liquid (ρ\rho), is best represented by :

    Tap an option to check your answer.

  2. Question 2

    This type asked 2 times: Re-NEET 2024, Re-NEET 2026. This one: Re-NEET 2026 See all 2 of this type

    10
    Water flows in a streamline motion through a horizontal pipe of circular cross-section as shown in the figure. The pressure difference of water between P and Q is 15 Nm−215\ \text{Nm}^{-2}. The area of cross-section at P and Q are 40 cm240\ \text{cm}^2 and 20 cm220\ \text{cm}^2, respectively. The rate of flow of water through the pipe, in cm3s−1\text{cm}^3\text{s}^{-1}, is : [Take density of water =1000 kg m−3= 1000\ \text{kg m}^{-3}]

    Tap an option to check your answer.

  3. Question 3

    Asked once: NEET 2021 (same type asked 2 times) See all 2 of this type

    2
    The velocity of a small ball of mass MM and density dd, when dropped in a container filled with glycerine becomes constant after some time. If the density of glycerine is d2\dfrac{d}{2}, then the viscous force acting on the ball will be

    Tap an option to check your answer.

  4. Question 4

    Asked once: Re-NEET 2024 (same type asked 2 times) See all 2 of this type

    5
    An ideal fluid is flowing in a non-uniform cross-sectional tube XYXY (as shown in the figure) from end XX to end YY. If K1K_1 and K2K_2 are the kinetic energy per unit volume of the fluid at XX and YY respectively, then the correct option is :

    Tap an option to check your answer.

  5. Question 5

    Asked once: NEET 2026

    44
    A submarine is designed to withstand an absolute pressure of 100 atm. How deep can it go below the water surface? (Consider the density of water = 1000 kg m−3^{-3}, 1 atm = 1×1051 \times 10^5 Pa and gravitational acceleration g=10g = 10 m/s2^2)

    Tap an option to check your answer.

  6. Question 6

    Asked once: NEET 2025

    1
    Consider a water tank shown in the figure. It has one wall at x=Lx = L and can be taken to be very wide in the zz direction. When filled with a liquid of surface tension SS and density ρ\rho, the liquid surface makes angle θ0\theta_0 (θ0≪1\theta_0 \ll 1) with the xx-axis at x=Lx = L. If y(x)y(x) is the height of the surface then the equation for y(x)y(x) is: (take θ(x)=sin⁡θ(x)=tan⁡θ(x)=dydx\theta(x) = \sin\theta(x) = \tan\theta(x) = \frac{dy}{dx}, gg is the acceleration due to gravity)

    Tap an option to check your answer.

  7. Question 7

    Asked once: NEET 2024

    28
    A thin flat circular disc of radius 4.5 cm is placed gently over the surface of water. If surface tension of water is 0.07 N m−1^{-1}, then the excess force required to take it away from the surface is

    Tap an option to check your answer.

  8. Question 8

    Asked once: NEET 2023

    14
    The amount of energy required to form a soap bubble of radius 2 cm2\,cm from a soap solution is nearly (surface tension of soap solution =0.03 N m−1= 0.03\,N\,m^{-1})

    Tap an option to check your answer.

  9. Question 9

    Asked once: NEET 2023

    23
    The venturi-meter works on

    Tap an option to check your answer.

  10. Question 10

    Asked once: NEET 2022

    8
    A spherical ball is dropped in a long column of a highly viscous liquid. The curve in the graph shown, which represents the speed of the ball (v)(v) as a function of time (t)(t) is

    Tap an option to check your answer.