PYQ Vault

SSC CGL Tier II Quantitative Aptitude · Formula sheet

Time, Speed and Distance formulas

5 formulas and 5 common traps for SSC CGL Tier II Quantitative Aptitude Time, Speed and Distance, grouped by subtopic.

Full notes with worked examples

Speed, Time and Distance Basics

Learn this subtopic in the notes

Speed, time, distance and units

Distance and units

d=v×t,1 km/h=518 m/sd = v \times t, \quad 1\ \text{km/h} = \frac{5}{18}\ \text{m/s}

Average speed

vˉ=total distancetotal time,vˉ=2aba+b for equal distances\bar{v} = \frac{\text{total distance}}{\text{total time}}, \quad \bar{v} = \frac{2ab}{a + b} \text{ for equal distances}

Boats, streams and races

Boat and stream

b=downstream+upstream2,s=downstream−upstream2b = \frac{\text{downstream} + \text{upstream}}{2}, \quad s = \frac{\text{downstream} - \text{upstream}}{2}

Common traps

Mixing kilometres per hour with metres and seconds

Before dividing metres by a speed, change the speed to m/s. 72 km/h is 20 m/s; using 72 against metres gives a time 3.6 times too small.

Averaging the two speeds

Equal distances at 4 and 12 km/h average 6 km/h, not 8. The slow half takes three times as long, so it counts for more.

Averaging the round-trip speeds for a boat

Going 15 km down at 10 km/h and back at 6 km/h averages 7.5 km/h, not 8. Work out each leg's time separately.

Relative Speed: Chasing and Meeting

Learn this subtopic in the notes

Meeting and chasing

Relative speed

time=gapa±b\text{time} = \frac{\text{gap}}{a \pm b}

Trains crossing

Time for a train to pass

t=L1+L2v1±v2t = \frac{L_1 + L_2}{v_1 \pm v_2}

Common traps

Adding speeds for a chase

A chaser gains only by the DIFFERENCE of the speeds: 11 km/h after 8 km/h closes the gap at 3 km/h, not 19.

Leaving out the train's own length

To cross a 360 m bridge, a 240 m train travels 600 m, not 360 m: the tail must clear the far end.

More SSC CGL Tier II Quantitative Aptitude formula sheets