PYQ Vault

Day 128: JEE Mains Physics

5 questions. Try each one first, then open its answer.

  1. Question 1

    Motion in a Straight Line. This type asked 2 times: 29 Jan 2024, 1 Feb 2024. This one: 1 Feb 2024 See all 2 of this type

    30
    A particle is moving in one dimension (along xx axis) under the action of a variable force. It's initial position was 16 m16\text{ }m right of origin. The variation of its position (x)(x) with time (t)(t) is given as x=−3t3+18t2+16tx = - 3t^{3}+ 18t^{2}+ 16t, where xx is in mm and tt is in ss. The velocity of the particle when its acceleration becomes zero is_____ m/sm/s.
  2. Question 2

    Motion in a Straight Line. This type asked 2 times: 13 Apr 2023, 1 Feb 2024. This one: 1 Feb 2024 See all 2 of this type

    104
    Train A is moving along two parallel rail tracks towards north with speed 72 km/h72\text{ }km/h and train BB is moving towards south with speed 108 km/h108\text{ }km/h. Velocity of train BB with respect to AA and velocity of ground with respect to BB are (in ms−1ms^{- 1} ) :

    Tap an option to check your answer.

  3. Question 3

    Ray Optics. This type asked 2 times: 30 Jan 2024, 1 Feb 2024. This one: 1 Feb 2024 See all 2 of this type

    23
    The distance between object and its 3 times magnified virtual image as produced by a convex lens is 20 cm20\text{ }cm. The focal length of the lens used is ____ cmcm.
  4. Question 4

    Thermodynamics. This type asked 2 times: 2021 Paper 26, 1 Feb 2024. This one: 1 Feb 2024 See all 2 of this type

    9
    The pressure and volume of an ideal gas are related as PV3/2=KPV^{3/2}= K (Constant). The work done when the gas is taken from state A(P1, V1, T1)A\left( P_{1},{\text{ }V}_{1},{\text{ }T}_{1} \right) to state B(P2, V2, T2)B\left( P_{2},{\text{ }V}_{2},{\text{ }T}_{2} \right) is:

    Tap an option to check your answer.

  5. Question 5

    Units and Measurements. This type asked 2 times: 31 Jan 2024, 1 Feb 2024. This one: 1 Feb 2024 See all 2 of this type

    14
    The radius (r), length (l)(l) and resistance (R) of a metal wire was measured in the laboratory as
    r=(0.35±0.05)cmr = (0.35 \pm 0.05)cm
    R=(100±10)R = (100 \pm 10) ohm
    l=(15±0.2)cml = (15 \pm 0.2)cm
    The percentage error in resistivity of the material of the wire is:

    Tap an option to check your answer.