PYQ Vault

Homi Bhabha Chemistry · Acids, Bases and Salts

Strength, Basicity and Ionisation

In water an acid gives H⁺ ions and a base gives OH⁻ ions; a strong one breaks up almost completely and a weak one only partly, and basicity counts the H⁺ ions one molecule of an acid can give.

Why this matters

Ten questions in the bank, one EASY, seven MODERATE and two HARD. Four ask whether an acid or base is strong or weak (or which solutions light a bulb), three count the basicity of an acid or the acidity of a base, and three ask what happens when an acid is added to water.

Concept 1 of 3: Strong and weak acids and bases

Drop an acid into water and its molecules break up into ions. In hydrochloric acid almost every molecule breaks up, so there are many H⁺ ions: a strong acid. In acetic acid only a few molecules break up: a weak acid. Ions carry electric current, so the strong solution conducts far better.

Definition

  • An acid gives H+\mathrm{H^+} ions in water; a base gives OH−\mathrm{OH^-} ions. A base that dissolves in water is an alkali.
  • Strong acids and bases dissociate (ionise) almost completely in water. Weak ones dissociate only partly.
  • Strong acids: HCl\mathrm{HCl}, H2SO4\mathrm{H_2SO_4}, HNO3\mathrm{HNO_3}. Strong bases: NaOH\mathrm{NaOH}, KOH\mathrm{KOH}.
  • Weak acids: acetic acid, formic acid HCOOH\mathrm{HCOOH}, carbonic acid and the fruit acids. Weak bases: ammonia, ammonium hydroxide NH4OH\mathrm{NH_4OH}, methyl amine.
  • Solutions of acids, bases and salts contain ions, so they conduct electricity and light a bulb. Sugar and alcohol solutions have no ions and do not.
SubstanceAcid or baseStrong or weak
Hydrochloric acid, HCl\mathrm{HCl}AcidStrong
Sulphuric acid, H2SO4\mathrm{H_2SO_4}AcidStrong
Nitric acid, HNO3\mathrm{HNO_3}AcidStrong
Acetic acid, CH3COOH\mathrm{CH_3COOH}AcidWeak
Formic acid, HCOOH\mathrm{HCOOH}AcidWeak
Carbonic acid, H2CO3\mathrm{H_2CO_3}AcidWeak
Sodium hydroxide, NaOH\mathrm{NaOH}BaseStrong
Potassium hydroxide, KOH\mathrm{KOH}BaseStrong
Ammonia and ammonium hydroxide, NH4OH\mathrm{NH_4OH}BaseWeak
Methyl amineBaseWeak
Strong or weak is about how much of the substance breaks into ions, not about how much of it is in the bottle.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

Homi Bhabha Class 9 · 2024 · Homi Bhabha Std IX (30 November 2024) · Q58Moderate

Example 1 · Acids, Bases and Salts · Strength, Basicity and Ionisation

In which of the following setup would the bulb glow.

Mixing up strong and concentrated

A strong acid breaks up almost completely into ions. A concentrated acid simply has a lot of acid in little water. Dilute hydrochloric acid is still a strong acid.

Thinking any dissolved substance conducts

Only solutions with ions conduct. Sugar and alcohol dissolve in water but give no ions, so the bulb stays dark.

Calling ammonia a strong base because it smells sharp

Ammonia and ammonium hydroxide ionise only partly in water, so they are weak bases.

Concept 2 of 3: Basicity of an acid and acidity of a base

Count what one molecule can give away. One molecule of sulphuric acid can give two H⁺ ions, so its basicity is 2. One molecule of calcium hydroxide can give two OH⁻ ions, so its acidity is 2. Only hydrogen that can leave as H⁺ is counted, not every hydrogen in the formula.

Definition

  • Basicity of an acid: the number of H+\mathrm{H^+} ions one molecule can give (its replaceable hydrogen atoms). 1 = monobasic, 2 = dibasic, 3 = tribasic.
  • Acidity of a base: the number of OH−\mathrm{OH^-} ions one molecule can give. 1 = monoacidic, 2 = diacidic, 3 = triacidic.
  • Count only the hydrogen that can leave. In acetic acid, CH3COOH\mathrm{CH_3COOH}, only the H of the COOH group is replaceable, so it is monobasic.
  • In phosphorous acid, H3PO3\mathrm{H_3PO_3}, one H is joined straight to the phosphorus atom and cannot leave, so it is dibasic. Phosphoric acid, H3PO4\mathrm{H_3PO_4}, is tribasic.
Acid or baseFormulaBasicity or acidity
Hydrochloric acidHCl\mathrm{HCl}1 (monobasic)
Acetic acidCH3COOH\mathrm{CH_3COOH}1 (monobasic)
Four H atoms in the formula, only one replaceable.
Sulphuric acidH2SO4\mathrm{H_2SO_4}2 (dibasic)
Carbonic acidH2CO3\mathrm{H_2CO_3}2 (dibasic)
Phosphorous acidH3PO3\mathrm{H_3PO_3}2 (dibasic)
Phosphoric acidH3PO4\mathrm{H_3PO_4}3 (tribasic)
Citric acidC6H8O7\mathrm{C_6H_8O_7}3 (tribasic)
Sodium hydroxideNaOH\mathrm{NaOH}1 (monoacidic)
Calcium hydroxideCa(OH)2\mathrm{Ca(OH)_2}2 (diacidic)
Ferric hydroxideFe(OH)3\mathrm{Fe(OH)_3}3 (triacidic)
Aluminium hydroxideAl(OH)3\mathrm{Al(OH)_3}3 (triacidic)
For a metal hydroxide, the acidity is simply the number of OH groups in the formula.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

Homi Bhabha Class 9 · 2021 · Homi Bhabha Std IX (19 December 2021, online) · Q45Moderate

Example 2 · Acids, Bases and Salts · Strength, Basicity and Ionisation

Which of the following is the triacidic base?

Counting every hydrogen in the formula

Basicity counts only the hydrogen that can leave as H⁺. Phosphorous acid, H₃PO₃, has three H atoms but a basicity of 2.

Mixing up basicity and acidity

Basicity belongs to an acid (H⁺ ions it gives). Acidity belongs to a base (OH⁻ ions it gives). Ferric hydroxide is triacidic, not tribasic.

Concept 3 of 3: Ionisation and dilution of an acid in water

An acid shows its acid properties only in water. There its molecules break up and each H⁺ ion joins a water molecule to make a hydronium ion, H₃O⁺. Adding more water does not remove these ions; it only spreads them through a bigger volume, so each spoonful holds fewer of them.

Definition

  • In water an acid ionises: HCl→H++Cl−\mathrm{HCl \rightarrow H^+ + Cl^-}. The H+\mathrm{H^+} joins water to form the hydronium ion, H3O+\mathrm{H_3O^+}.
  • Adding water to an acid is dilution: the concentration of H3O+\mathrm{H_3O^+} ions per unit volume decreases.
  • With water alone there is no base, so there is no neutralisation and no salt is formed.
  • Mixing an acid with water gives out a lot of heat. Always add the acid to water, slowly, with stirring, never water to acid.
  • When sulphuric acid and water mix, their particles attract each other and pack closer, so the final volume is slightly less than the two volumes added together.
When acid is added to waterWhat happens
IonisationYes: the acid breaks into ions and gives H3O+\mathrm{H_3O^+}
DilutionYes: the concentration of H3O+\mathrm{H_3O^+} ions falls
NeutralisationNo: there is no base
Salt formationNo: a salt needs an acid and a base
HeatGiven out; adding water to the acid can make it splash
Total volumeA little less than the sum of the two volumes
Ionisation and dilution happen together; neutralisation needs a base.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

Homi Bhabha Class 9 · 2021 · Homi Bhabha Std IX (24 January 2021, online) · Q43Moderate

Example 3 · Acids, Bases and Salts · Strength, Basicity and Ionisation

Which of the following phenomenons are occur, when small amount of acid is added to water ? 1- ionisation 2- salt formation 3- dilution 4- neutralization

Thinking dilution removes ions

Dilution keeps the same number of H₃O⁺ ions but spreads them through more water. Only their concentration falls.

Adding volumes as if nothing happens

Sulphuric acid and water particles attract and pack closer, so 10 ml of the acid and 10 ml of water make a little less than 20 ml.

Pouring water into acid

The heat given out can make the mixture boil and splash. Always add the acid to water, slowly.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Reference tables (3)

Strong and weak acids and bases10 rows
SubstanceAcid or baseStrong or weak
Hydrochloric acid, HCl\mathrm{HCl}AcidStrong
Sulphuric acid, H2SO4\mathrm{H_2SO_4}AcidStrong
Nitric acid, HNO3\mathrm{HNO_3}AcidStrong
Acetic acid, CH3COOH\mathrm{CH_3COOH}AcidWeak
Formic acid, HCOOH\mathrm{HCOOH}AcidWeak
Carbonic acid, H2CO3\mathrm{H_2CO_3}AcidWeak
Sodium hydroxide, NaOH\mathrm{NaOH}BaseStrong
Potassium hydroxide, KOH\mathrm{KOH}BaseStrong
Ammonia and ammonium hydroxide, NH4OH\mathrm{NH_4OH}BaseWeak
Methyl amineBaseWeak
Strong or weak is about how much of the substance breaks into ions, not about how much of it is in the bottle.
Basicity of an acid and acidity of a base11 rows
Acid or baseFormulaBasicity or acidity
Hydrochloric acidHCl\mathrm{HCl}1 (monobasic)
Acetic acidCH3COOH\mathrm{CH_3COOH}1 (monobasic)
Four H atoms in the formula, only one replaceable.
Sulphuric acidH2SO4\mathrm{H_2SO_4}2 (dibasic)
Carbonic acidH2CO3\mathrm{H_2CO_3}2 (dibasic)
Phosphorous acidH3PO3\mathrm{H_3PO_3}2 (dibasic)
Phosphoric acidH3PO4\mathrm{H_3PO_4}3 (tribasic)
Citric acidC6H8O7\mathrm{C_6H_8O_7}3 (tribasic)
Sodium hydroxideNaOH\mathrm{NaOH}1 (monoacidic)
Calcium hydroxideCa(OH)2\mathrm{Ca(OH)_2}2 (diacidic)
Ferric hydroxideFe(OH)3\mathrm{Fe(OH)_3}3 (triacidic)
Aluminium hydroxideAl(OH)3\mathrm{Al(OH)_3}3 (triacidic)
For a metal hydroxide, the acidity is simply the number of OH groups in the formula.
Ionisation and dilution of an acid in water6 rows
When acid is added to waterWhat happens
IonisationYes: the acid breaks into ions and gives H3O+\mathrm{H_3O^+}
DilutionYes: the concentration of H3O+\mathrm{H_3O^+} ions falls
NeutralisationNo: there is no base
Salt formationNo: a salt needs an acid and a base
HeatGiven out; adding water to the acid can make it splash
Total volumeA little less than the sum of the two volumes
Ionisation and dilution happen together; neutralisation needs a base.

Watch out for (8)

Test yourself on a real paper

Sit a past Homi Bhabha Class 9 paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.