PYQ Vault

Homi Bhabha Physics · Sound

Frequency, Pitch and Loudness

A sound wave's speed, frequency and wavelength are tied by v = fλ, its time period is 1/f, its pitch follows its frequency and its loudness follows its amplitude.

Why this matters

Six questions in the bank, three EASY and three MODERATE: three use v = fλ or T = 1/f (two of them are the same tuning-fork question, asked in 2017 and again in 2021), one reads the frequency off a graph, and two compare waves drawn side by side for pitch and loudness.

Concept 1 of 2: Wave speed, frequency and time period: v = fλ

Frequency is how many waves leave the source each second; wavelength is the length of one wave. If 100 waves, each 3 m long, leave every second, the front of the sound has gone 300 m in that second. So speed is frequency times wavelength. The time for one wave is the time period, and it is just 1 divided by the frequency.

Definition

  • Frequency (f): the number of vibrations in one second, in hertz (Hz). 1 kHz = 1000 Hz.
  • Wavelength (λ): the distance between two neighbouring compressions (or rarefactions), in metres.
  • Time period (T): the time for one vibration. T=1fT = \frac{1}{f}. 1 ms = 0.001 s.
  • Wave speed: v=fλv = f\lambda. In one medium the speed is fixed, so a higher frequency means a shorter wavelength.
  • Reading a graph: find the time from one crest to the next crest (one full wave). That is T; then f=1Tf = \frac{1}{T}.

Wave relations

v=fλT=1fv = f\lambda \qquad T = \frac{1}{f}
  • vvspeed of the wave, in m/s
  • fffrequency, in hertz (Hz)
  • λλwavelength, in metres
  • TTtime period, in seconds

Worked example

A siren gives out a note of frequency 250 Hz on a hot day when sound travels at 350 m/s. Find the wavelength and the time period of the sound.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

Homi Bhabha Class 9 · 2017 · Homi Bhabha Std IX (16 September 2017) · Q23Easy

Example 1 · Sound · Frequency, Pitch and Loudness

A tuning fork creates the sound waves of the wavelength 0.5m. Determine the frequency of tuning fork if the speed of sound in air is 330 m/s.

Leaving ms or kHz unconverted

Change milliseconds to seconds and kilohertz to hertz first. A time period of 2 ms is 0.002 s, so the frequency is 500 Hz, not 0.5 Hz.

Multiplying instead of dividing for the time period

The time period is 1 divided by the frequency. For 50 Hz it is 150=0.02\frac{1}{50} = 0.02 s, not 50 s.

Thinking a higher note travels faster

In one medium every sound travels at the same speed. A higher frequency only shortens the wavelength.

Concept 2 of 2: Pitch, loudness and reading a wave diagram

A bee's buzz is shrill and a lion's roar is deep: that is pitch, and it comes from how fast the source vibrates. A shout and a whisper of the same word differ in loudness: that comes from how far the particles swing, the amplitude. On a drawing of a wave, count the waves for pitch and measure their height for loudness.

Definition

  • Pitch depends on frequency: higher frequency, higher (shriller) pitch.
  • Loudness depends on amplitude: larger amplitude, louder sound. Loudness is measured in decibels (dB).
  • Quality (timbre) depends on the shape of the wave: it lets you tell a flute from a violin playing the same note.
  • A musical note has a regular, repeating wave; noise has an irregular wave.
  • Comparing two drawn waves over the same time: more waves means higher frequency and pitch; taller waves mean larger amplitude and a louder sound.
PropertyDepends onWhat to look for in a wave diagram
PitchFrequencyMore complete waves in the same time: higher pitch
LoudnessAmplitudeTaller crests and deeper troughs: louder; a small amplitude is a soft sound
Quality (timbre)Shape of the waveTwo waves of the same frequency and height but different shapes
NoiseIrregular vibrationA jagged wave with no repeating pattern
Pitch and loudness are separate: a high note can be soft and a low note can be loud.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

Homi Bhabha Class 9 · 2021 · Homi Bhabha Std IX (24 January 2021, online) · Q23Moderate

Example 2 · Sound · Frequency, Pitch and Loudness

In the following diagrams two distinct sound waves 'X' and 'Y' are given. Select the correct option about their pitch and frequency (F)

Mixing up pitch and loudness

Pitch comes from frequency and loudness from amplitude. A soft wave has a small height, whatever its number of waves.

Reading the taller wave as the higher pitch

Height is amplitude, which decides loudness. For pitch, count how many complete waves fit into the same time.

Calling every wave in a diagram a note

An irregular, jagged wave is noise. A musical note repeats the same shape again and again.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (1)

Reference tables (1)

Pitch, loudness and reading a wave diagram4 rows
PropertyDepends onWhat to look for in a wave diagram
PitchFrequencyMore complete waves in the same time: higher pitch
LoudnessAmplitudeTaller crests and deeper troughs: louder; a small amplitude is a soft sound
Quality (timbre)Shape of the waveTwo waves of the same frequency and height but different shapes
NoiseIrregular vibrationA jagged wave with no repeating pattern
Pitch and loudness are separate: a high note can be soft and a low note can be loud.

Watch out for (6)

Test yourself on a real paper

Sit a past Homi Bhabha Class 9 paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.