PYQ Vault

NEET Botany · Plant Growth and Development

Growth and Differentiation

What plant growth is, its three phases, how arithmetic and geometric growth rates are worked out, how cells differentiate, dedifferentiate and redifferentiate, and why plants show plasticity.

Why this matters

Nine NEET questions: two EASY and seven MODERATE. Plasticity was asked three times (NEET 2021, NEET 2022 and NEET 2026) and dedifferentiation twice (NEET 2023 and NEET 2024). Both 2026 papers asked about growth itself: NEET 2026 on the phase of elongation and Re-NEET 2026 a sum on arithmetic growth.

Concept 1 of 4: Growth and its three phases

Growth is an increase in size that cannot be undone. A plant keeps growing all its life because it has meristems: groups of cells that never stop dividing. A new cell made at the root or shoot tip passes through three stages as the tip grows away from it: it divides, then it gets longer, then it matures into its final form.

Definition

Growth in NCERT:

  • Growth is an irreversible permanent increase in size of an organ, its parts or even of an individual cell. It goes with metabolic processes that use energy.
  • Plant growth is indeterminate: plants keep the ability to grow throughout life because of meristems. This is the open form of growth.
  • Root and shoot apical meristems give primary growth (the plant gets longer). Lateral meristems, the vascular cambium and cork cambium, appear later and give secondary growth (the girth of the organ increases).
  • Growth is measurable: by fresh weight, dry weight, length, area, volume or cell number. A single maize root apical meristem can make more than 17,500 new cells an hour; cells in a watermelon may grow up to 3,50,000 times in size. Growth of a pollen tube is measured by its length; of a dorsiventral leaf by its surface area.
  • Growth needs water, oxygen and nutrients, an optimum temperature, and is also affected by light and gravity.
PhaseWhere the cells areWhat the cells are like
MeristematicAt the root apex and the shoot apex, dividing all the timeRich in protoplasm, with large conspicuous nuclei; thin, cellulosic primary walls with many plasmodesmata
ElongationJust next to the meristematic zone, away from the tipIncreased vacuolation, cell enlargement and new cell wall depositionQ
NEET 2026: a large conspicuous nucleus is NOT a feature of the phase of elongation; it marks the meristematic phase.
MaturationFurther away from the tip, behind the phase of elongationCells reach their maximal size in wall thickening and changes in the protoplasm
Practise this conceptself-check · 5 quick reps

The same idea in a real exam question:

NEET · 2026 · NEET (UG) 2026 — 03 May 2026 · Q114Moderate

Example 1 · Plant Growth and Development · Growth and Differentiation

Which one of the following is not a characteristic of plant cells in the phase of elongation?

Large nuclei belong to dividing cells

Large conspicuous nuclei and dense protoplasm mark the meristematic phase. Cells in the phase of elongation are known by vacuolation, enlargement and new wall deposition.

Growth is irreversible

A cell that swells with water and shrinks again has not grown. Growth is an irreversible permanent increase in size.

Concept 2 of 4: Arithmetic and geometric growth

Growth rate is how much growth happens in a unit of time. If only one of the two daughter cells keeps dividing, the plant adds the same amount every day, and a graph of length against time is a straight line. If both daughter cells keep dividing, growth is slow at first, then shoots up, then slows down when food runs short: an S shaped curve.

Definition

Growth rates in NCERT:

  • Arithmetic growth: after mitosis only one daughter cell keeps dividing; the other differentiates and matures. Example: a root elongating at a constant rate. Length against time gives a linear curve.
  • Geometric growth: both daughter cells keep dividing. Growth is slow at first (lag phase), then rapid at an exponential rate (log or exponential phase). When nutrients run short it slows to a stationary phase. The curve is sigmoid (S shaped), typical of cells, tissues and organs growing in nature.
  • Geometric growth: W1=W0 ertW_1 = W_0\,e^{rt}. Here W1W_1 is the final size (weight, height, number), W0W_0 the initial size, rr the growth rate, tt the time and ee the base of natural logarithms.
  • rr is the relative growth rate, a measure of the plant's ability to make new plant material, called the efficiency index. So W1W_1 depends on W0W_0.
  • Absolute growth rate: the total growth per unit time. Relative growth rate: the growth per unit time expressed on a common basis, such as per unit of the starting size.

Arithmetic growth

Lt=L0+rtL_t = L_0 + rt
  • LtL_tlength at time t
  • L0L_0length at time zero
  • rrgrowth rate, the elongation per unit time
  • tttime of growth

Diagram · arithmetic and geometric growth

ArithmeticGeometriconly one daughter keeps dividingboth daughters keep dividingLₜ = L₀ + rt: a line5587512150length (cm)time (days)sigmoid (S shaped)laglogstationarysizetime

Left: a stem of 15 cm growing 5 cm a day is 55 cm at 8 days and 75 cm at 12 days. Right: geometric growth is slow at first, then rapid, then slows when nutrients run short: W₁ = W₀eʳᵗ.

Worked example

A stem grows arithmetically from 15 cm to 55 cm in 8 days. Find its growth rate, and its length after 12 days from the start.
Practise this conceptself-check · 5 quick reps

The same idea in a real exam question:

NEET · 2026 · Re-NEET (UG) 2026 — 21 Jun 2026 · Q133Moderate

Example 2 · Plant Growth and Development · Growth and Differentiation

Length of the stem at time 0 is 20 cm. The arithmetic growth rate is 30 cm per day. What is the length of the stem at the end of the 7th^\text{th} day ?

Add the growth to the starting length

In Lt=L0+rtL_t = L_0 + rt the growth rtrt is added to L0L_0. Writing rtrt alone as the final length forgets where the stem began.

Linear is arithmetic, sigmoid is geometric

A straight line of growth against time means arithmetic growth. The S shaped curve with lag, log and stationary phases is geometric growth.

Concept 3 of 4: Differentiation, dedifferentiation and redifferentiation

A new cell from a meristem matures into a cell with one job, such as a xylem vessel: that is differentiation, and such a cell usually stops dividing. Some living mature cells can start dividing again: that is dedifferentiation. The new dividing cells then mature into cells with jobs once more: that is redifferentiation. Think of it as specialise, go back, specialise again.

Definition

What NCERT says:

  • Differentiation: cells from the root and shoot apical meristems and the cambium mature to do specific jobs. A tracheary element loses its protoplasm and builds a very strong, elastic, lignocellulosic secondary wall to carry water.
  • Dedifferentiation: living differentiated cells, which had lost the capacity to divide, regain it.
  • Redifferentiation: the cells these new meristems make lose the capacity to divide again and mature to do specific jobs.
  • Differentiation in plants is open: cells from the same meristem end up different, and the final form depends on where the cell sits. Cells away from the root apical meristem become root cap cells; those pushed to the periphery become epidermis.
  • Totipotency is the capacity to generate a whole plant from any cell (or explant). It is the basis of plant tissue culture.
  • In tissue culture: micropropagation gives many plants genetically identical to the original, called somaclones; meristem culture (apical and axillary meristems) gives virus free plants; protoplast fusion of two plants (somatic hybridisation) gave the pomato, a hybrid of tomato and potato.
ProcessWhat happensNCERT example
DifferentiationMeristem cells mature into cells that do a specific jobTracheary elements lose protoplasm and form lignocellulosic secondary walls
DedifferentiationMature living cells regain the power to divideInterfascicular cambium and cork cambium formed from fully differentiated parenchyma cellsQ
NEET 2024: interfascicular cambium from parenchyma is dedifferentiation, not redifferentiation.
Callus formationLeaf mesophyll cells put in a culture medium start dividing and form a callusAn example of dedifferentiation in tissue cultureQ
NEET 2023: mesophyll cells forming a callus is dedifferentiation.
RedifferentiationCells cut off by the new meristems stop dividing again and matureSecondary xylem, secondary phloem and cork made by the two cambia
TotipotencyAny plant cell can give rise to a whole plantThe basis of plant tissue cultureQ
NEET 2024: the capacity to generate a whole plant from any cell is totipotency.
Practise this conceptself-check · 5 quick reps

The same idea in a real exam question:

NEET · 2024 · NEET (UG) 2024 — 05 May 2024 · Q117Moderate

Example 3 · Plant Growth and Development · Growth and Differentiation

Formation of interfascicular cambium from fully developed parenchyma cells is an example for

A new cambium is dedifferentiation

Mature parenchyma turning into interfascicular cambium or cork cambium is dedifferentiation: the cells regain the power to divide. Redifferentiation is what the cambium's products do later, when they mature into xylem, phloem or cork.

Somaclones come from micropropagation

Somaclones are the identical plants of micropropagation. Pomato comes from protoplast fusion, and virus free plants from meristem culture.

Concept 4 of 4: Development and plasticity

Development is everything a plant goes through, from a germinating seed to old age. The same plant can make different kinds of leaves at different stages of life, or in different surroundings. This ability to follow different paths and build different structures is plasticity. Heterophylly, different leaf shapes on one plant, is the NCERT example.

Definition

What NCERT says:

  • Development is the sum of all the changes a plant goes through in its life cycle, from germination of the seed to senescence. Development = growth + differentiation.
  • Plasticity: plants follow different pathways in response to the environment or to phases of life to form different kinds of structures.
  • Heterophylly (leaves of different shapes on one plant) is the example. In cotton, coriander and larkspur the leaves of the juvenile plant differ in shape from those of the mature plant.
  • In buttercup, leaves formed in air and leaves formed in water differ in shape: heterophyllous development due to the environment.
  • Development is controlled by intrinsic factors (genetic factors inside the cell, and chemicals between cells such as plant growth regulators) and extrinsic factors (light, temperature, water, oxygen, nutrition).
PlantWhat differsWhat causes it
CottonLeaves of the juvenile plant differ in shape from mature leavesPhase of life
CorianderLeaves of the juvenile plant differ in shape from mature leavesPhase of life
LarkspurLeaves of the juvenile plant differ in shape from mature leavesPhase of life
ButtercupLeaves formed in air differ in shape from leaves formed in waterEnvironmentQ
NEET 2026: heterophyllous development in response to the environment is plasticity.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2022 · NEET (UG) 2022 — 17 Jul 2022 · Q116Moderate

Example 4 · Plant Growth and Development · Growth and Differentiation

Which one of the following plants does not show plasticity?

Maize is not an NCERT plasticity example

NCERT names cotton, coriander, larkspur and buttercup for heterophylly. A list that adds maize puts in a plant NCERT never uses for plasticity.

Plasticity, not elasticity

The ability to form different structures in response to environment or phase of life is plasticity. Elasticity and flexibility are not the NCERT term, and dedifferentiation is a different process.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (1)

Reference tables (3)

Growth and its three phases3 rows
PhaseWhere the cells areWhat the cells are like
MeristematicAt the root apex and the shoot apex, dividing all the timeRich in protoplasm, with large conspicuous nuclei; thin, cellulosic primary walls with many plasmodesmata
ElongationJust next to the meristematic zone, away from the tipIncreased vacuolation, cell enlargement and new cell wall depositionQ
NEET 2026: a large conspicuous nucleus is NOT a feature of the phase of elongation; it marks the meristematic phase.
MaturationFurther away from the tip, behind the phase of elongationCells reach their maximal size in wall thickening and changes in the protoplasm
Differentiation, dedifferentiation and redifferentiation5 rows
ProcessWhat happensNCERT example
DifferentiationMeristem cells mature into cells that do a specific jobTracheary elements lose protoplasm and form lignocellulosic secondary walls
DedifferentiationMature living cells regain the power to divideInterfascicular cambium and cork cambium formed from fully differentiated parenchyma cellsQ
NEET 2024: interfascicular cambium from parenchyma is dedifferentiation, not redifferentiation.
Callus formationLeaf mesophyll cells put in a culture medium start dividing and form a callusAn example of dedifferentiation in tissue cultureQ
NEET 2023: mesophyll cells forming a callus is dedifferentiation.
RedifferentiationCells cut off by the new meristems stop dividing again and matureSecondary xylem, secondary phloem and cork made by the two cambia
TotipotencyAny plant cell can give rise to a whole plantThe basis of plant tissue cultureQ
NEET 2024: the capacity to generate a whole plant from any cell is totipotency.
Development and plasticity4 rows
PlantWhat differsWhat causes it
CottonLeaves of the juvenile plant differ in shape from mature leavesPhase of life
CorianderLeaves of the juvenile plant differ in shape from mature leavesPhase of life
LarkspurLeaves of the juvenile plant differ in shape from mature leavesPhase of life
ButtercupLeaves formed in air differ in shape from leaves formed in waterEnvironmentQ
NEET 2026: heterophyllous development in response to the environment is plasticity.

Watch out for (8)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper