PYQ Vault

NEET Chemistry · Aldehydes, Ketones and Carboxylic Acids

Preparation and Physical Properties

How aldehydes and ketones are made from alcohols, alkenes, alkynes, acid chlorides, nitriles and esters, the routes to aromatic aldehydes and ketones, and why their boiling points sit between those of hydrocarbons and alcohols.

Why this matters

Six NEET questions from 2021 to 2026. Two are on the Etard reaction: the chromium complex formed on the way (2021), and what else is true of its product benzaldehyde (Re-NEET 2026). One matches four conversions to their reagents (2024), one picks DIBAL-H to turn an ester into an aldehyde (2025), one tests why aldehydes and ketones boil where they do (2022), and one ranks an ether, a ketone, an alcohol and an acid by polarity (Re-NEET 2026).

Concept 1 of 3: Preparing aldehydes and ketones

There are two ways to reach a C=O group. Go up from an alcohol, alkene or alkyne by oxidation, ozonolysis or hydration. Or come down from a compound that is already more oxidised, such as an acid chloride, a nitrile or an ester, using a reducing agent gentle enough to stop at the aldehyde. Each method has its own named reagent, and NEET asks you to match them.

Definition

  • Oxidation of alcohols: a primary alcohol gives an aldehyde, a secondary alcohol a ketone. CrO3\text{CrO}_3 does this; for a primary alcohol it must be in an anhydrous medium, or use PCC, so that the aldehyde is not oxidised on to the acid.
  • Dehydrogenation: alcohol vapour passed over Cu or Ag at 573 K.
  • Ozonolysis of an alkene, then Zn and water, gives aldehydes, ketones or both.
  • Hydration of an alkyne with dilute H2SO4\text{H}_2\text{SO}_4 and HgSO4\text{HgSO}_4: ethyne gives ethanal, other alkynes give ketones.
  • From acid derivatives: an acid chloride with H2\text{H}_2 over Pd on BaSO4\text{BaSO}_4 gives an aldehyde (Rosenmund reduction). A nitrile with SnCl2\text{SnCl}_2 and HCl, then water, gives an aldehyde (Stephen reaction). DIBAL-H reduces a nitrile or an ester to an aldehyde.
  • Ketones only: a nitrile with a Grignard reagent, then hydrolysis; an acid chloride with a dialkylcadmium.
Starting compoundReagentProduct
Primary alcoholCrO3\text{CrO}_3 (anhydrous) or PCCAldehyde
Secondary alcoholCrO3\text{CrO}_3KetoneQ
NEET 2024: cyclohexanol to cyclohexanone was matched with CrO₃, and an alkene to two ketones with O₃ then Zn and water.
AlkeneO3\text{O}_3, then Zn and H2O\text{H}_2\text{O}Aldehydes, ketones or both
EthyneH2O\text{H}_2\text{O}, dilute H2SO4\text{H}_2\text{SO}_4, HgSO4\text{HgSO}_4Ethanal
Acid chlorideH2\text{H}_2, Pd on BaSO4\text{BaSO}_4 (Rosenmund)Aldehyde
NitrileSnCl2\text{SnCl}_2, HCl, then H3O+\text{H}_3\text{O}^+ (Stephen)Aldehyde
Nitrile or esterDIBAL-H, AlH(iBu)2\text{AlH(iBu)}_2, then H2O\text{H}_2\text{O}AldehydeQ
NEET 2025: methyl benzoate to benzaldehyde needs DIBAL-H, not LiAlH₄ or NaBH₄.
NitrileGrignard reagent RMgX, then H3O+\text{H}_3\text{O}^+Ketone
Acid chlorideDialkylcadmium R2Cd\text{R}_2\text{Cd}Ketone
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2025 · NEET (UG) 2025 — 04 May 2025 · Q83Moderate

Example 1 · Aldehydes, Ketones and Carboxylic Acids · Preparation and Physical Properties

Identify the suitable reagent for the following conversion: methyl benzoate (C6H5-CO-OCH3\text{C}_6\text{H}_5\text{-CO-OCH}_3) is converted to benzaldehyde (C6H5-CHO\text{C}_6\text{H}_5\text{-CHO}).

LiAlH₄ goes past the aldehyde

LiAlH₄ reduces an ester all the way to a primary alcohol. To stop at the aldehyde stage, the reagent is DIBAL-H followed by water.

Rosenmund starts from an acid chloride

Hydrogen over Pd on BaSO4\text{BaSO}_4 turns an acid chloride (RCOCl) into an aldehyde. It is not used on an acid or an ester.

Concept 2 of 3: Aromatic aldehydes and ketones

Benzaldehyde is made either by oxidising the methyl group of toluene gently, so that it stops at CHO, or by putting a CHO group straight onto benzene. Aromatic ketones are made by putting an acyl group onto the ring. Each toluene route passes through its own intermediate, and NEET asks for those intermediates by name.

Definition

  • Etard reaction: toluene with chromyl chloride, CrO2Cl2\text{CrO}_2\text{Cl}_2, in CS2\text{CS}_2 gives a chromium complex, C6H5CH(OCrOHCl2)2\text{C}_6\text{H}_5\text{CH(OCrOHCl}_2)_2, which water and acid hydrolyse to benzaldehyde.
  • Chromic oxide in acetic anhydride: toluene gives benzylidene diacetate, C6H5CH(OCOCH3)2\text{C}_6\text{H}_5\text{CH(OCOCH}_3)_2, which hydrolyses to benzaldehyde.
  • Side-chain chlorination: toluene with Cl2\text{Cl}_2 in light gives benzal chloride, C6H5CHCl2\text{C}_6\text{H}_5\text{CHCl}_2, which water at 373 K hydrolyses to benzaldehyde. This is how benzaldehyde is made commercially.
  • Gattermann-Koch reaction: benzene with CO and HCl, anhydrous AlCl3\text{AlCl}_3 and CuCl, gives benzaldehyde.
  • Friedel-Crafts acylation: benzene with an acid chloride and anhydrous AlCl3\text{AlCl}_3 gives an aryl ketone, such as acetophenone or benzophenone.
NameStart and reagentIntermediateProduct
Etard reactionToluene, CrO2Cl2\text{CrO}_2\text{Cl}_2 in CS2\text{CS}_2Chromium complex C6H5CH(OCrOHCl2)2\text{C}_6\text{H}_5\text{CH(OCrOHCl}_2)_2BenzaldehydeQ
NEET 2021: the intermediate X is the chromium complex, not benzylidene diacetate or benzal chloride.
Chromic oxide routeToluene, CrO3\text{CrO}_3 in acetic anhydrideBenzylidene diacetate C6H5CH(OCOCH3)2\text{C}_6\text{H}_5\text{CH(OCOCH}_3)_2Benzaldehyde
Side-chain chlorinationToluene, Cl2\text{Cl}_2 and light, then water at 373 KBenzal chloride C6H5CHCl2\text{C}_6\text{H}_5\text{CHCl}_2Benzaldehyde
Gattermann-KochBenzene, CO and HCl, anhydrous AlCl3\text{AlCl}_3 and CuClNo isolated intermediateBenzaldehyde
Friedel-Crafts acylationBenzene, RCOCl and anhydrous AlCl3\text{AlCl}_3No isolated intermediateAryl ketone such as C6H5COCH3\text{C}_6\text{H}_5\text{COCH}_3
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2021 · NEET (UG) 2021 — 12 Sep 2021 · Q92Moderate

Example 2 · Aldehydes, Ketones and Carboxylic Acids · Preparation and Physical Properties

The intermediate compound 'X' in the following chemical reaction is:
C6H5CH3+CrO2Cl2→CS2X→H3O+C6H5CHOC_6H_5CH_3 + CrO_2Cl_2 \xrightarrow{CS_2} X \xrightarrow{H_3O^+} C_6H_5CHO

Three toluene routes, three intermediates

Chromyl chloride gives the chromium complex, CrO3\text{CrO}_3 in acetic anhydride gives benzylidene diacetate, and chlorine in light gives benzal chloride. Each is hydrolysed to benzaldehyde, so match the intermediate to the reagent.

Friedel-Crafts gives a ketone, Gattermann-Koch an aldehyde

An acid chloride with AlCl3\text{AlCl}_3 puts an acyl group on benzene, giving a ketone such as acetophenone. CO and HCl put on a CHO group, giving benzaldehyde.

Concept 3 of 3: Boiling points and solubility

The C=O bond is polar, so aldehyde and ketone molecules attract each other through dipole-dipole forces. That is stronger than the attraction between hydrocarbon or ether molecules, but weaker than the hydrogen bonds between alcohol molecules, since an aldehyde or ketone has no O-H. So for molecules of about the same mass, their boiling points fall in between.

Definition

  • Methanal is a gas at room temperature, ethanal a volatile liquid, and the other aldehydes and ketones are liquids or solids.
  • Their boiling points are higher than those of hydrocarbons and ethers of comparable mass, because of weak association through dipole-dipole interactions.
  • They are lower than those of alcohols of comparable mass, because aldehydes and ketones cannot form hydrogen bonds with each other.
  • Methanal, ethanal and propanone mix with water in all proportions, because they form hydrogen bonds with water. Solubility falls as the alkyl chain grows.
  • Carboxylic acids boil higher still, even above alcohols of comparable mass, because their hydrogen bonding is more extensive. Most exist as hydrogen-bonded dimers in the vapour phase.
CompoundMolar massBoiling pointMain attraction
n-Butane58273 KWeak van der Waals forces
Methoxyethane60281 KWeak dipole-dipole forces
Propanal58322 KDipole-dipole forcesQ
NEET 2022: both statements were true. Dipole-dipole forces lift aldehydes and ketones above hydrocarbons; no hydrogen bonding keeps them below alcohols.
Acetone58329 KDipole-dipole forces
Propan-1-ol60370 KHydrogen bonds
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2022 · NEET (UG) 2022 — 17 Jul 2022 · Q62Moderate

Example 3 · Aldehydes, Ketones and Carboxylic Acids · Preparation and Physical Properties

Given below are two statements : Statement I : The boiling points of aldehydes and ketones are higher than hydrocarbons of comparable molecular masses because of weak molecular association in aldehydes and ketones due to dipole - dipole interactions. Statement II : The boiling points of aldehydes and ketones are lower than the alcohols of similar molecular masses due to the absence of H-bonding. In the light of the above statements, choose the most appropriate answer from the given below

Aldehyde molecules do not hydrogen bond to each other

An aldehyde or ketone has no hydrogen on oxygen, so its molecules attract by dipole-dipole forces only. Hydrogen bonds form only with a partner that has an O-H, such as water.

Acids boil above alcohols

For comparable molar mass the order of boiling point is hydrocarbon < ether < aldehyde or ketone < alcohol < carboxylic acid. The acid is highest because of its more extensive hydrogen bonding.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Reference tables (3)

Preparing aldehydes and ketones9 rows
Starting compoundReagentProduct
Primary alcoholCrO3\text{CrO}_3 (anhydrous) or PCCAldehyde
Secondary alcoholCrO3\text{CrO}_3KetoneQ
NEET 2024: cyclohexanol to cyclohexanone was matched with CrO₃, and an alkene to two ketones with O₃ then Zn and water.
AlkeneO3\text{O}_3, then Zn and H2O\text{H}_2\text{O}Aldehydes, ketones or both
EthyneH2O\text{H}_2\text{O}, dilute H2SO4\text{H}_2\text{SO}_4, HgSO4\text{HgSO}_4Ethanal
Acid chlorideH2\text{H}_2, Pd on BaSO4\text{BaSO}_4 (Rosenmund)Aldehyde
NitrileSnCl2\text{SnCl}_2, HCl, then H3O+\text{H}_3\text{O}^+ (Stephen)Aldehyde
Nitrile or esterDIBAL-H, AlH(iBu)2\text{AlH(iBu)}_2, then H2O\text{H}_2\text{O}AldehydeQ
NEET 2025: methyl benzoate to benzaldehyde needs DIBAL-H, not LiAlH₄ or NaBH₄.
NitrileGrignard reagent RMgX, then H3O+\text{H}_3\text{O}^+Ketone
Acid chlorideDialkylcadmium R2Cd\text{R}_2\text{Cd}Ketone
Aromatic aldehydes and ketones5 rows
NameStart and reagentIntermediateProduct
Etard reactionToluene, CrO2Cl2\text{CrO}_2\text{Cl}_2 in CS2\text{CS}_2Chromium complex C6H5CH(OCrOHCl2)2\text{C}_6\text{H}_5\text{CH(OCrOHCl}_2)_2BenzaldehydeQ
NEET 2021: the intermediate X is the chromium complex, not benzylidene diacetate or benzal chloride.
Chromic oxide routeToluene, CrO3\text{CrO}_3 in acetic anhydrideBenzylidene diacetate C6H5CH(OCOCH3)2\text{C}_6\text{H}_5\text{CH(OCOCH}_3)_2Benzaldehyde
Side-chain chlorinationToluene, Cl2\text{Cl}_2 and light, then water at 373 KBenzal chloride C6H5CHCl2\text{C}_6\text{H}_5\text{CHCl}_2Benzaldehyde
Gattermann-KochBenzene, CO and HCl, anhydrous AlCl3\text{AlCl}_3 and CuClNo isolated intermediateBenzaldehyde
Friedel-Crafts acylationBenzene, RCOCl and anhydrous AlCl3\text{AlCl}_3No isolated intermediateAryl ketone such as C6H5COCH3\text{C}_6\text{H}_5\text{COCH}_3
Boiling points and solubility5 rows
CompoundMolar massBoiling pointMain attraction
n-Butane58273 KWeak van der Waals forces
Methoxyethane60281 KWeak dipole-dipole forces
Propanal58322 KDipole-dipole forcesQ
NEET 2022: both statements were true. Dipole-dipole forces lift aldehydes and ketones above hydrocarbons; no hydrogen bonding keeps them below alcohols.
Acetone58329 KDipole-dipole forces
Propan-1-ol60370 KHydrogen bonds

Watch out for (6)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper