PYQ Vault

NEET Chemistry · Amines

Diazonium Salts

What nitrous acid does to primary amines: aromatic amines give diazonium salts that are stable only in the cold, aliphatic amines give an alcohol and nitrogen gas, and a benzenediazonium salt is the starting point for putting Cl, Br, I, F, CN, OH, NO₂ or H on the ring, or for making azo dyes.

Why this matters

Eight NEET questions from 2021 to 2026. Three end with a primary aliphatic amine meeting nitrous acid: ethanamine giving ethanol at the end of a chain from methanol (Re-NEET 2024) and from ethane (2026), and benzylamine giving benzyl alcohol after LiAlH₄ on benzonitrile (2022). Two are statements on how stable diazonium salts are and how they are made (2022, 2025). Three are replacement reactions: ethanol replacing the diazo group by hydrogen (2021), Cu₂Br₂ and HBr followed by a Grignard step (2023), and KI at the end of a four-step chain (Re-NEET 2024).

Concept 1 of 3: Diazotisation and the stability of diazonium salts

Nitrous acid turns the NH₂ of a primary aromatic amine into the diazonium group, N₂⁺. Nitrous acid itself is unstable, so it is made in the flask from sodium nitrite and hydrochloric acid. The product survives only because the positive charge is spread over the benzene ring, and even then only in ice-cold solution, so it is made at 273 to 278 K and used at once.

Definition

  • Diazonium salts have the general formula R-N2+X−\text{R-N}_2^+\text{X}^-. Converting a primary aromatic amine into one is called diazotisation.
  • Aniline reacts with nitrous acid, made in the mixture from NaNO2\text{NaNO}_2 and HCl, at 273 to 278 K to give benzenediazonium chloride.
  • Arenediazonium ions are stabilised by resonance with the ring. Even so, the salt is stable only for a short time in cold solution, so it is not stored and is used immediately.
  • Benzenediazonium chloride is a colourless crystalline solid, readily soluble in water. It is stable in the cold but reacts with water when warmed, and it decomposes easily in the dry state.
  • Benzenediazonium fluoroborate is insoluble in water and stable at room temperature.
  • Primary aliphatic amines form highly unstable alkyldiazonium salts that cannot be kept at all.

Diazotisation of aniline at 273 to 278 K

C6H5NH2+NaNO2+2 HCl→273-278 KC6H5N2+Cl−+NaCl+2 H2O\text{C}_6\text{H}_5\text{NH}_2 + \text{NaNO}_2 + 2\,\text{HCl} \xrightarrow{273\text{-}278\ \text{K}} \text{C}_6\text{H}_5\text{N}_2^+\text{Cl}^- + \text{NaCl} + 2\,\text{H}_2\text{O}
  • NaNO2+HCl\text{NaNO}_2 + \text{HCl}make the nitrous acid in the flask
  • C6H5N2+Cl−\text{C}_6\text{H}_5\text{N}_2^+\text{Cl}^-benzenediazonium chloride

Worked example

4-Methylaniline (p-toluidine) is treated with NaNO₂ and HCl at 273 K. Name the product and say why the temperature is kept so low.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2022 · NEET (UG) 2022 — 17 Jul 2022 · Q77Moderate

Example 1 · Amines · Diazonium Salts

Given below are two statements Statement I: Primary aliphatic amines react with HNO2HNO_2 to give unstable diazonium salts. Statement II: Primary aromatic amines react with HNO2HNO_2 to form diazonium salts which are stable even above 300 K. In the light of the above statements, choose the most appropriate answer from the options given below

Stable only in the cold

Arenediazonium salts are stable for a short time at 273 to 278 K. Warmed, they react with water, and benzenediazonium chloride decomposes easily when dry, which is why it is used at once.

Nitrous acid is made in the flask

HNO2\text{HNO}_2 is not taken from a bottle. It is made in the reaction mixture from NaNO2\text{NaNO}_2 and HCl.

Concept 2 of 3: Nitrous acid with primary aliphatic amines

A primary aliphatic amine meets nitrous acid exactly as aniline does, but its diazonium ion has no ring to spread the charge over. It falls apart as soon as it forms: nitrogen gas bubbles off and water takes its place, so the amine ends up as an alcohol with the same carbon chain.

Definition

  • A primary aliphatic amine with nitrous acid (NaNO2\text{NaNO}_2 and HCl) gives a highly unstable alkyldiazonium salt, which with water gives an alcohol and nitrogen gas.
  • The nitrogen is given off quantitatively, which is used in the estimation of amino acids and proteins.
  • An amine whose NH2\text{NH}_2 is on an sp3sp^3 carbon is aliphatic even if a ring is present elsewhere: benzylamine, C6H5CH2NH2\text{C}_6\text{H}_5\text{CH}_2\text{NH}_2, gives benzyl alcohol.
  • Only an amine with NH2\text{NH}_2 on the ring itself, such as aniline, gives a diazonium salt that lasts in the cold.

Nitrous acid on a primary aliphatic amine

R-NH2+HNO2→NaNO2+HCl[R-N2+Cl−]→H2OR-OH+N2+HCl\text{R-NH}_2 + \text{HNO}_2 \xrightarrow{\text{NaNO}_2 + \text{HCl}} [\text{R-N}_2^+\text{Cl}^-] \xrightarrow{\text{H}_2\text{O}} \text{R-OH} + \text{N}_2 + \text{HCl}
  • [R-N2+Cl−][\text{R-N}_2^+\text{Cl}^-]the alkyldiazonium salt, which decomposes at once
  • R-OH\text{R-OH}the alcohol, with the same carbon chain as the amine

Worked example

Propan-1-amine, CH₃CH₂CH₂NH₂, is treated with NaNO₂ and HCl and then with water. Name the organic product and the gas.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2026 · NEET (UG) 2026 — 03 May 2026 · Q85Moderate

Example 2 · Amines · Diazonium Salts

The major product Z formed in the following sequence of reactions is
C2H6→UV lightCl2X (monochlorinated product)→NH3Y→(ii)H2O(i)NaNO2/HClZ\text{C}_2\text{H}_6 \xrightarrow[\text{UV light}]{\text{Cl}_2} X\ (\text{monochlorinated product}) \xrightarrow{\text{NH}_3} Y \xrightarrow[(\text{ii}) \text{H}_2\text{O}]{(\text{i}) \text{NaNO}_2/\text{HCl}} Z

An aliphatic amine ends as an alcohol

A primary aliphatic amine with nitrous acid does not give a diazonium salt you can use. It gives an alcohol and nitrogen gas, so ethanamine ends as ethanol.

Benzylamine is an aliphatic amine

A benzene ring in the molecule does not make an amine aromatic. In C6H5CH2NH2\text{C}_6\text{H}_5\text{CH}_2\text{NH}_2 the NH2\text{NH}_2 is on a CH2\text{CH}_2, so nitrous acid gives benzyl alcohol.

Concept 3 of 3: Replacement and coupling reactions of diazonium salts

The diazo group leaves as nitrogen gas, one of the most stable molecules there is, so almost any group can take its place on the ring. That makes a benzenediazonium salt the easy way to put on groups that cannot be added to benzene directly, such as iodine, fluorine, CN or OH. In coupling reactions the nitrogen stays, and the N=N joins two rings to make a coloured azo dye.

Definition

  • Sandmeyer reaction: Cu2Cl2\text{Cu}_2\text{Cl}_2/HCl, Cu2Br2\text{Cu}_2\text{Br}_2/HBr or CuCN/KCN replace the diazo group by Cl, Br or CN. Gattermann reaction: copper powder with HCl or HBr gives the same halides.
  • Iodine: shaking with KI gives iodobenzene. Iodine is not easy to put into the benzene ring directly, so this is the way to make it.
  • Fluorine: fluoroboric acid precipitates the fluoroborate, which on heating gives the aryl fluoride.
  • Hydrogen: mild reducing agents, hypophosphorous acid (H3PO2\text{H}_3\text{PO}_2) or ethanol, replace the diazo group by H and give the arene. They are oxidised to phosphorous acid and ethanal.
  • OH: if the solution warms to 283 K the salt is hydrolysed to phenol.
  • Coupling: with phenol (alkaline) it gives p-hydroxyazobenzene, an orange dye; with aniline (mildly acidic) p-aminoazobenzene, a yellow dye. The N=N is kept.
ReagentGroup put inProduct from benzenediazonium chlorideName
Cu2Cl2\text{Cu}_2\text{Cl}_2/HClClChlorobenzeneSandmeyer reaction
Cu2Br2\text{Cu}_2\text{Br}_2/HBrBrBromobenzeneSandmeyer reactionQ
NEET 2023: bromobenzene from this step, then Mg in dry ether and water, gave benzene.
Cu powder with HCl or HBrCl or BrChlorobenzene or bromobenzeneGattermann reaction
CuCN/KCNCNBenzonitrileSandmeyer reaction
KIIIodobenzeneReplacement by iodideQ
Re-NEET 2024: after chlorination, Sn/HCl and diazotisation, KI put iodine where the NH₂ had been.
HBF4\text{HBF}_4, then heatFFluorobenzeneVia the fluoroborate
H3PO2\text{H}_3\text{PO}_2 or CH3CH2OH\text{CH}_3\text{CH}_2\text{OH}HBenzeneReductionQ
NEET 2021: ethanol turned 2,4,6-tribromobenzenediazonium chloride into 1,3,5-tribromobenzene.
Water, warmed to 283 KOHPhenolHydrolysis
Phenol, alkalineN=N kept, ring joined at parap-Hydroxyazobenzene, orange dyeCoupling
Aniline, mildly acidicN=N kept, ring joined at parap-Aminoazobenzene, yellow dyeCoupling
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2021 · NEET (UG) 2021 — 12 Sep 2021 · Q87Moderate

Example 3 · Amines · Diazonium Salts

The reagent 'R' in the given sequence of chemical reaction is:
2,4,6-tribromoaniline→0-5∘CNaNO2,  HCl2,4,6-tribromobenzenediazonium chloride→R1,3,5-tribromobenzene\text{2,4,6-tribromoaniline} \xrightarrow[0\text{-}5^\circ\text{C}]{NaNO_2, \; HCl} \text{2,4,6-tribromobenzenediazonium chloride} \xrightarrow{R} \text{1,3,5-tribromobenzene}

Ethanol puts in H, not OH

Ethanol and H3PO2\text{H}_3\text{PO}_2 reduce the diazonium salt to the arene. The OH group comes from warming the salt with water, not from ethanol.

KI needs no copper

Iodobenzene forms on simply shaking the diazonium salt with KI. The copper(I) salts are for Cl, Br and CN.

Coupling keeps the nitrogen

In every replacement reaction N2\text{N}_2 leaves. In coupling with phenol or aniline the two nitrogens stay as an N=N link between the rings.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (2)

  • Diazotisation and the stability of diazonium salts

    Diazotisation of aniline at 273 to 278 K

    C6H5NH2+NaNO2+2 HCl→273-278 KC6H5N2+Cl−+NaCl+2 H2O\text{C}_6\text{H}_5\text{NH}_2 + \text{NaNO}_2 + 2\,\text{HCl} \xrightarrow{273\text{-}278\ \text{K}} \text{C}_6\text{H}_5\text{N}_2^+\text{Cl}^- + \text{NaCl} + 2\,\text{H}_2\text{O}
  • Nitrous acid with primary aliphatic amines

    Nitrous acid on a primary aliphatic amine

    R-NH2+HNO2→NaNO2+HCl[R-N2+Cl−]→H2OR-OH+N2+HCl\text{R-NH}_2 + \text{HNO}_2 \xrightarrow{\text{NaNO}_2 + \text{HCl}} [\text{R-N}_2^+\text{Cl}^-] \xrightarrow{\text{H}_2\text{O}} \text{R-OH} + \text{N}_2 + \text{HCl}

Reference tables (1)

Replacement and coupling reactions of diazonium salts10 rows
ReagentGroup put inProduct from benzenediazonium chlorideName
Cu2Cl2\text{Cu}_2\text{Cl}_2/HClClChlorobenzeneSandmeyer reaction
Cu2Br2\text{Cu}_2\text{Br}_2/HBrBrBromobenzeneSandmeyer reactionQ
NEET 2023: bromobenzene from this step, then Mg in dry ether and water, gave benzene.
Cu powder with HCl or HBrCl or BrChlorobenzene or bromobenzeneGattermann reaction
CuCN/KCNCNBenzonitrileSandmeyer reaction
KIIIodobenzeneReplacement by iodideQ
Re-NEET 2024: after chlorination, Sn/HCl and diazotisation, KI put iodine where the NH₂ had been.
HBF4\text{HBF}_4, then heatFFluorobenzeneVia the fluoroborate
H3PO2\text{H}_3\text{PO}_2 or CH3CH2OH\text{CH}_3\text{CH}_2\text{OH}HBenzeneReductionQ
NEET 2021: ethanol turned 2,4,6-tribromobenzenediazonium chloride into 1,3,5-tribromobenzene.
Water, warmed to 283 KOHPhenolHydrolysis
Phenol, alkalineN=N kept, ring joined at parap-Hydroxyazobenzene, orange dyeCoupling
Aniline, mildly acidicN=N kept, ring joined at parap-Aminoazobenzene, yellow dyeCoupling

Watch out for (7)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper