PYQ Vault

NEET Chemistry · Chemical Kinetics

Integrated Rate Laws and Half-Life

How concentration falls with time in zero-order and first-order reactions, their half-lives, the time for a given fraction to react, and the plots that tell the two orders apart.

Why this matters

Six NEET questions from 2022 to 2026. Two use the first-order equation (k when 0.1 M falls to 0.001 M in 5 minutes, 2022; the time for 7.2 M to fall to 0.9 M, 2025), one uses the half-life (the time for 99.9% completion when the half-life is 1 minute, 2025), one is a zero-order time (75% of A reacting in 2A → B, Re-NEET 2026), and two read the order from a plot (2022 and 2026).

Concept 1 of 4: Zero-order reactions

In a zero-order reaction the rate does not depend on how much reactant is left. The reactant is used up at a steady pace, like water running out of a tap at a fixed flow, so its concentration falls in a straight line until it runs out.

Definition

  • Rate =k[R]0=k= k[\text{R}]^{0} = k: the rate stays the same as R is used up.
  • [R]=[R]0−kt[\text{R}] = [\text{R}]_0 - kt: a straight line of [R] against t, with slope −k-k and intercept [R]0[\text{R}]_0.
  • Half-life: t1/2=[R]02kt_{1/2} = \dfrac{[\text{R}]_0}{2k}. It is proportional to the starting concentration.
  • The reaction is over at t=[R]0kt = \dfrac{[\text{R}]_0}{k}.
  • Examples: the decomposition of gaseous ammonia on a hot platinum surface at high pressure, and the thermal decomposition of HI on a gold surface.

Zero order

[R]=[R]0−kt,t1/2=[R]02k[\text{R}] = [\text{R}]_0 - kt, \qquad t_{1/2} = \frac{[\text{R}]_0}{2k}

Worked example

A → products is zero order with k=0.02k = 0.02 mol L⁻¹ min⁻¹, and [A]0=0.5[\text{A}]_0 = 0.5 M. Find the half-life and the time for the reaction to be complete.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2026 · Re-NEET (UG) 2026 — 21 Jun 2026 · Q60Moderate

Example 1 · Chemical Kinetics · Integrated Rate Laws and Half-Life

2A→kB2A \xrightarrow{k} B is a zero-order reaction, where k=1.0k = 1.0 mol L−1L^{-1} min−1min^{-1}. If the initial concentration of A is 2 M, then the time taken to complete 75% of the reaction will be

Zero-order half-life grows with the start

For a zero-order reaction t1/2=[R]02kt_{1/2} = \dfrac{[\text{R}]_0}{2k}, so doubling the starting concentration doubles the half-life. Only a first-order half-life is independent of it.

Watch the coefficient

For 2A→B2\text{A} \rightarrow \text{B} with rate =k= k, the rate is −12d[A]dt-\dfrac{1}{2}\dfrac{d[\text{A}]}{dt}, so A is used up at 2k, not k.

Concept 2 of 4: First-order reactions

In a first-order reaction the rate is proportional to how much reactant is left. With a lot of reactant it goes fast; as the reactant runs down it slows. So the concentration falls quickly at first and then more and more slowly, and a fixed fraction is used up in each equal interval of time.

Definition

  • Rate =k[R]= k[\text{R}].
  • ln⁡[R]=ln⁡[R]0−kt\ln[\text{R}] = \ln[\text{R}]_0 - kt, or [R]=[R]0e−kt[\text{R}] = [\text{R}]_0 e^{-kt}.
  • In base-10 logs: k=2.303tlog⁡[R]0[R]k = \dfrac{2.303}{t}\log\dfrac{[\text{R}]_0}{[\text{R}]}.
  • If a fraction x has reacted, [R]=(1−x)[R]0[\text{R}] = (1 - x)[\text{R}]_0.
  • Examples: hydrogenation of ethene, all natural and artificial radioactive decay, and the decomposition of N2O5\text{N}_2\text{O}_5 and N2O\text{N}_2\text{O}.
  • Pseudo first order: a reaction whose rate law has two reactants but which behaves as first order because one of them (often water as the solvent) is in large excess and hardly changes. Example: the acid hydrolysis of ethyl acetate.

First order

k=2.303tlog⁡[R]0[R],[R]=[R]0 e−ktk = \frac{2.303}{t}\log\frac{[\text{R}]_0}{[\text{R}]}, \qquad [\text{R}] = [\text{R}]_0\,e^{-kt}
  • [R]0[\text{R}]_0concentration at the start
  • [R][\text{R}]concentration after time t

Worked example

A first-order reaction has k=4.606×10−2 min−1k = 4.606 \times 10^{-2}\ \text{min}^{-1} and starts at [R]0=0.50[\text{R}]_0 = 0.50 M. What is [R] after 50 minutes?
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2022 · NEET (UG) 2022 — 17 Jul 2022 · Q88Moderate

Example 2 · Chemical Kinetics · Integrated Rate Laws and Half-Life

For a first order reaction A →\rightarrow Products, initial concentration of A is 0.1 M, which becomes 0.001 M after 5 minutes. Rate constant for the reaction in min−1min^{-1} is

Use what is left, not what has reacted

The ratio in the log is [R]0[R]\dfrac{[\text{R}]_0}{[\text{R}]}, with [R] the amount LEFT. If 75% has reacted, 25% is left and the ratio is 4, not 43\dfrac{4}{3}.

2.303 goes with log, not ln

k=1tln⁡[R]0[R]=2.303tlog⁡[R]0[R]k = \dfrac{1}{t}\ln\dfrac{[\text{R}]_0}{[\text{R}]} = \dfrac{2.303}{t}\log\dfrac{[\text{R}]_0}{[\text{R}]}. Writing 2.303 with ln, or leaving it out with log, puts the answer out by a factor of 2.303.

The time unit carries into k

If t is in minutes, k comes out in min⁻¹. Change both to seconds (or both to minutes) before comparing with an option.

Concept 3 of 4: Half-life of a first-order reaction

The half-life is the time for half of the reactant to be used up. In a first-order reaction the same fraction reacts in each equal interval, so every half-life is the same length, whatever amount you start with. After one half-life half is left, after two a quarter, after three an eighth.

Definition

  • Put [R]=[R]02[\text{R}] = \dfrac{[\text{R}]_0}{2} in the first-order equation: t1/2=2.303klog⁡2=0.693kt_{1/2} = \dfrac{2.303}{k}\log 2 = \dfrac{0.693}{k}.
  • t1/2t_{1/2} does not depend on [R]0[\text{R}]_0.
  • After n half-lives the fraction left is (12)n\left(\dfrac{1}{2}\right)^{n}.
  • 75% reacted takes 2 half-lives, 87.5% takes 3.
  • 99.9% reacted: t=2.303klog⁡1000=6.909kt = \dfrac{2.303}{k}\log 1000 = \dfrac{6.909}{k}, which is about 10 t1/210\,t_{1/2}.

First-order half-life

t1/2=0.693k,[R][R]0=(12)n,n=tt1/2t_{1/2} = \frac{0.693}{k}, \qquad \frac{[\text{R}]}{[\text{R}]_0} = \left(\frac{1}{2}\right)^{n}, \quad n = \frac{t}{t_{1/2}}

Worked example

A first-order reaction has a half-life of 15 min. Find k, and the fraction of the reactant left after 1 hour.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2025 · NEET (UG) 2025 — 04 May 2025 · Q56Moderate

Example 3 · Chemical Kinetics · Integrated Rate Laws and Half-Life

If the half-life (t1/2t_{1/2}) for a first order reaction is 1 minute, then the time required for 99.9% completion of the reaction is closest to:

First-order half-life ignores the start

t1/2=0.693kt_{1/2} = \dfrac{0.693}{k} has no concentration in it. Doubling or halving [R]0[\text{R}]_0 leaves a first-order half-life unchanged.

Two half-lives leave a quarter

After one half-life half is left; after two, half of that half, so 25% remains. The reactant is not used up after two half-lives.

Concept 4 of 4: Plots that show the order

Each integrated rate law turns into a straight line when you choose the right axes. So a graph tells you the order: find which pair of quantities gives a straight line, or which one stays flat. Always read the axes before the shape.

Definition

  • Zero order: [R]=[R]0−kt[\text{R}] = [\text{R}]_0 - kt, so [R] against t is a straight line with slope −k-k.
  • First order: ln⁡[R]=ln⁡[R]0−kt\ln[\text{R}] = \ln[\text{R}]_0 - kt, so ln[R] against t is a straight line with slope −k-k; and log⁡[R]0[R]=kt2.303\log\dfrac{[\text{R}]_0}{[\text{R}]} = \dfrac{kt}{2.303} is a straight line through the origin with slope k2.303\dfrac{k}{2.303}.
  • A quantity that does not change with concentration gives a flat line: the rate of a zero-order reaction, and the half-life of a first-order reaction.

Diagram · which plot is straight for each order

Zero orderFirst order[R] against t[R]tstraight, slope −k[R]tcurve, slows downln[R] against tln[R]ta curveln[R]tstraight, slope −klog([R]₀/[R]) against tlogta curvelogtthrough 0, slope k/2.303Rate against [R]rate[R]flat: rate = krate[R]through 0, slope kHalf-life against [R]₀t½[R]₀through 0, slope 1/2kt½[R]₀flat: t½ = 0.693/k

Zero order: [R] = [R]₀ − kt, so [R] against t is straight. First order: ln[R] = ln[R]₀ − kt, so ln[R] against t is straight; a slope of −0.02 min⁻¹ there means k = 0.02 min⁻¹.

Green: a straight line. Amber: the two flat lines. Flat rate against [R] means zero order; flat half-life against [R]₀ means first order. Read the axes before the shape.

PlotZero orderFirst order
[R] against tStraight line falling, slope −k-k, intercept [R]0[\text{R}]_0A curve falling more and more slowlyQ
NEET 2026: a straight falling line of [R] against t means zero order.
ln[R] against tA curveStraight line falling, slope −k-k
log([R]₀/[R]) against tA curveStraight line through the origin, slope k2.303\dfrac{k}{2.303}
Rate against [R]Flat line, rate=k\text{rate} = kStraight line through the origin, slope kk
NEET 2022: the flat line, read as rate against concentration, is zero order.
Half-life against [R]₀Straight line through the origin, slope 12k\dfrac{1}{2k}Flat line, t1/2=0.693kt_{1/2} = \dfrac{0.693}{k}
NEET 2022: the flat line, read as half-life against concentration, is first order.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2022 · NEET (UG) 2022 — 17 Jul 2022 · Q65Moderate

Example 4 · Chemical Kinetics · Integrated Rate Laws and Half-Life

The given graph is a representation of kinetics of a reaction. (The graph shows y constant with x at constant temperature T.) The y and x axes for zero and first order reactions, respectively are

A straight [R] line is zero order

A first-order reaction gives a curve when [R] is plotted against t. Its straight line comes from ln[R] against t. A falling straight line of [R] itself means zero order.

Two different flat lines

A flat line of rate against [R] means zero order. A flat line of half-life against [R]0[\text{R}]_0 means first order. The same shape means different orders on different axes.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (3)

  • Zero-order reactions

    Zero order

    [R]=[R]0−kt,t1/2=[R]02k[\text{R}] = [\text{R}]_0 - kt, \qquad t_{1/2} = \frac{[\text{R}]_0}{2k}
  • First-order reactions

    First order

    k=2.303tlog⁡[R]0[R],[R]=[R]0 e−ktk = \frac{2.303}{t}\log\frac{[\text{R}]_0}{[\text{R}]}, \qquad [\text{R}] = [\text{R}]_0\,e^{-kt}
  • Half-life of a first-order reaction

    First-order half-life

    t1/2=0.693k,[R][R]0=(12)n,n=tt1/2t_{1/2} = \frac{0.693}{k}, \qquad \frac{[\text{R}]}{[\text{R}]_0} = \left(\frac{1}{2}\right)^{n}, \quad n = \frac{t}{t_{1/2}}

Reference tables (1)

Plots that show the order5 rows
PlotZero orderFirst order
[R] against tStraight line falling, slope −k-k, intercept [R]0[\text{R}]_0A curve falling more and more slowlyQ
NEET 2026: a straight falling line of [R] against t means zero order.
ln[R] against tA curveStraight line falling, slope −k-k
log([R]₀/[R]) against tA curveStraight line through the origin, slope k2.303\dfrac{k}{2.303}
Rate against [R]Flat line, rate=k\text{rate} = kStraight line through the origin, slope kk
NEET 2022: the flat line, read as rate against concentration, is zero order.
Half-life against [R]₀Straight line through the origin, slope 12k\dfrac{1}{2k}Flat line, t1/2=0.693kt_{1/2} = \dfrac{0.693}{k}
NEET 2022: the flat line, read as half-life against concentration, is first order.

Watch out for (9)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper