PYQ Vault

NEET Chemistry · The d- and f-Block Elements

General Properties of Transition Elements

What makes an element a transition element, why the 3d metals melt high and show many oxidation states, what their electrode potentials say, how their oxides change from basic to acidic, and why they are good catalysts.

Why this matters

Six NEET questions from 2023 to 2026. One asks why 3d metals have high melting points (Re-NEET 2026), one why Cu²⁺ salts are more stable than Cu⁺ salts in water (2023), one why the Mn³⁺/Mn²⁺ potential is so positive (2024), and one picks the incorrect statements about transition metal oxides (2023). Two match catalysts with the processes they are used in (2025 and NEET 2026).

Concept 1 of 4: Electronic configuration and metallic properties

In the d-block the new electron goes into the d subshell of the shell below the outermost one. The outer s electrons stay much the same, so the metals of a series are alike. Because the (n−1)d and ns electrons are close in energy, both kinds can take part in bonding, and this one fact explains the high melting points, the many oxidation states and the coloured, magnetic ions.

Definition

  • A transition element has an incompletely filled d subshell in its atom or in any of its common oxidation states.
  • Zn, Cd and Hg have a full d10d^{10} subshell in the atom and in their common ions, so they are not regarded as transition elements, though they sit in the d-block.
  • General outer configuration: (n−1)d1−10 ns1−2(n-1)d^{1-10}\,ns^{1-2}. Two exceptions in the 3d series: Cr is 3d54s13d^5 4s^1 and Cu is 3d104s13d^{10} 4s^1, because half-filled and full d subshells are extra stable.
  • High melting points: the (n−1)d electrons join the ns electrons in metallic bonding, so the bonding is strong. Melting points rise to a maximum near the middle of a series and then fall.
  • Ionisation enthalpy rises along each series, with small irregularities, because the nuclear charge rises as the inner d orbitals fill.
PropertyTrend in the 3d seriesReason
Melting pointHigh; rises to a maximum near the middle, then falls(n−1)d electrons join ns electrons in metallic bonding
Re-NEET 2026: high melting points explained by 3d electrons bonding along with the 4s electrons.
Atomic and ionic radiusFalls along the seriesA d electron shields the outer electrons poorly from the rising nuclear charge
Ionisation enthalpyRises along the series, with small irregularitiesNuclear charge rises as the inner d orbitals fill
Configuration of Cr3d54s13d^5 4s^1, not 3d44s23d^4 4s^2A half-filled d subshell is extra stable
Configuration of Cu3d104s13d^{10} 4s^1, not 3d94s23d^9 4s^2A full d subshell is extra stable
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2026 · Re-NEET (UG) 2026 — 21 Jun 2026 · Q61Easy

Example 1 · The d- and f-Block Elements · General Properties of Transition Elements

Given below are two statements : one is labelled as Assertion A and the other is labelled as Reason R. Assertion A : Generally, 3d transition metals have high melting points. Reason R : Involvement of 3d-electrons in addition to 4s-electrons in the interatomic metallic bonding. In light of the above statements, choose the most appropriate answer from the options given below:

Zinc is in the d-block but not a transition element

Zn, Cd and Hg keep a full d10d^{10} subshell in the atom and in their common ions. Count them as d-block elements, not transition elements.

Chromium and copper break the filling pattern

Cr is 3d54s13d^5 4s^1 and Cu is 3d104s13d^{10} 4s^1. Writing 3d44s23d^4 4s^2 or 3d94s23d^9 4s^2 gives the wrong number of d electrons in every ion you build from them.

Concept 2 of 4: Oxidation states and electrode potentials

A transition metal can lose its ns electrons and then some of its d electrons, one at a time, so its oxidation states differ by one. The standard electrode potential E° of a couple tells you which way an ion would like to go. A large positive E°(M³⁺/M²⁺) means M³⁺ grabs an electron: it is an oxidising agent. A negative value means M²⁺ gives one away: it is a reducing agent. A half-filled d⁵ or full d¹⁰ ion is the one the change tends to end at.

Definition

  • Oxidation states differ by units of one. Mn shows the most, from +2 to +7. Sc shows only +3 and Zn only +2.
  • From Sc to Mn the highest oxidation state equals the group number: Ti +4, V +5, Cr +6, Mn +7.
  • E°(M²⁺/M) is negative for every 3d metal except Cu (+0.34 V), so Cu does not liberate hydrogen from dilute acids.
  • E°(M³⁺/M²⁺) is very positive for Mn (+1.57 V): Mn3+\text{Mn}^{3+} (d4d^4) takes an electron to become the stable d5d^5 Mn2+\text{Mn}^{2+}, so Mn3+\text{Mn}^{3+} is a strong oxidising agent. For Fe it is lower (+0.77 V) because Fe3+\text{Fe}^{3+} is already d5d^5.
  • Cr2+\text{Cr}^{2+} is a strong reducing agent (E°(Cr³⁺/Cr²⁺) = −0.41 V): it loses an electron to reach Cr3+\text{Cr}^{3+} (d3d^3).
  • Cu+\text{Cu}^+ disproportionates in water: 2Cu+→Cu2++Cu2\text{Cu}^+ \rightarrow \text{Cu}^{2+} + \text{Cu}. Cu2+\text{Cu}^{2+}(aq) is the stable ion because its hydration enthalpy (−2121 kJ mol⁻¹) is so negative that it more than makes up for the second ionisation enthalpy of copper.
CoupleE° in voltsWhat it means
Cu2+/Cu\text{Cu}^{2+}/\text{Cu}+0.34The only positive M²⁺/M value: Cu gives no hydrogen with dilute acid
NEET 2023: Cu²⁺ salts are more stable than Cu⁺ salts in water because of the hydration energy of Cu²⁺.
Cr3+/Cr2+\text{Cr}^{3+}/\text{Cr}^{2+}−0.41Negative: Cr2+\text{Cr}^{2+} is a strong reducing agent
Fe3+/Fe2+\text{Fe}^{3+}/\text{Fe}^{2+}+0.77Fe3+\text{Fe}^{3+} is only a mild oxidising agent; it is already d5d^5
Mn3+/Mn2+\text{Mn}^{3+}/\text{Mn}^{2+}+1.57Mn3+\text{Mn}^{3+} (d4d^4) gains an electron to reach stable d5d^5: a strong oxidising agent
NEET 2024: this couple is so positive because the change is from d⁴ to the half-filled d⁵.
Co3+/Co2+\text{Co}^{3+}/\text{Co}^{2+}+1.97Co3+\text{Co}^{3+} is a strong oxidising agent
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2024 · NEET (UG) 2024 — 05 May 2024 · Q60Moderate

Example 2 · The d- and f-Block Elements · General Properties of Transition Elements

The E∘E^\circ value for the Mn3+/Mn2+Mn^{3+}/Mn^{2+} couple is more positive than that of Cr3+/Cr2+Cr^{3+}/Cr^{2+} or Fe3+/Fe2+Fe^{3+}/Fe^{2+} due to change of

Copper does not liberate hydrogen

Copper is the only 3d metal with a positive E°(M²⁺/M), +0.34 V. Every other 3d metal has a negative value.

Cu²⁺ wins in water despite its second ionisation enthalpy

Removing a second electron from Cu costs a lot, yet Cu2+\text{Cu}^{2+}(aq) is the stable ion. The reason is the large negative hydration enthalpy of Cu2+\text{Cu}^{2+}, not its ionisation enthalpy.

Same d⁴ count, opposite behaviour

Cr2+\text{Cr}^{2+} and Mn3+\text{Mn}^{3+} are both d4d^4. Cr2+\text{Cr}^{2+} is a reducing agent (it goes to d3d^3); Mn3+\text{Mn}^{3+} is an oxidising agent (it goes to d5d^5).

Concept 3 of 4: Oxides of the transition metals

A metal in a low oxidation state gives an ionic, basic oxide, like the oxides of the s-block. As the oxidation state climbs, the metal pulls harder on the oxygen, the bonds become covalent, and the oxide turns acidic, like a non-metal oxide. So follow one metal through its oxides and the nature changes from basic to amphoteric to acidic.

Definition

  • All the 3d metals except scandium form MO oxides, which are ionic.
  • The highest oxidation number in the oxides equals the group number from Sc2O3\text{Sc}_2\text{O}_3 to Mn2O7\text{Mn}_2\text{O}_7. Beyond group 7 no oxide of iron higher than Fe2O3\text{Fe}_2\text{O}_3 is known.
  • As the oxidation number rises, ionic character falls and acidic character rises. Mn2O7\text{Mn}_2\text{O}_7 is a covalent green oil; CrO3\text{CrO}_3 and V2O5\text{V}_2\text{O}_5 have low melting points.
  • Mn2O7\text{Mn}_2\text{O}_7 gives HMnO4\text{HMnO}_4 with water; CrO3\text{CrO}_3 gives H2CrO4\text{H}_2\text{CrO}_4 and H2Cr2O7\text{H}_2\text{Cr}_2\text{O}_7.
  • Vanadium: basic V2O3\text{V}_2\text{O}_3, less basic V2O4\text{V}_2\text{O}_4, amphoteric V2O5\text{V}_2\text{O}_5. V2O4\text{V}_2\text{O}_4 dissolves in acids to give VO2+\text{VO}^{2+} salts. V2O5\text{V}_2\text{O}_5 is mainly acidic: it gives VO43−\text{VO}_4^{3-} with alkalis and VO2+\text{VO}_2^+ salts with acids.
  • Chromium: CrO is basic, Cr2O3\text{Cr}_2\text{O}_3 is amphoteric, CrO3\text{CrO}_3 is acidic.
OxideOxidation state of the metalNature
CrO+2Basic
Cr2O3\text{Cr}_2\text{O}_3+3Amphoteric
CrO3\text{CrO}_3+6Acidic
V2O3\text{V}_2\text{O}_3+3Basic
V2O4\text{V}_2\text{O}_4+4Less basic; gives VO2+\text{VO}^{2+} salts with acids
NEET 2023: 'V₂O₄ dissolves in acids to give VO₄³⁻ salts' was one of the incorrect statements.
V2O5\text{V}_2\text{O}_5+5Amphoteric, mainly acidic
Mn2O7\text{Mn}_2\text{O}_7+7Acidic; a covalent green oil
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2023 · NEET (UG) 2023 — 07 May 2023 · Q93Hard

Example 3 · The d- and f-Block Elements · General Properties of Transition Elements

Which of the following statements are INCORRECT? A. All the transition metals except scandium form MO oxides which are ionic. B. The highest oxidation number corresponding to the group number in transition metal oxides is attained in Sc2O3Sc_2O_3 to Mn2O7Mn_2O_7. C. Basic character increases from V2O3V_2O_3 to V2O4V_2O_4 to V2O5V_2O_5. D. V2O4V_2O_4 dissolves in acids to give VO43−VO_4^{3-} salts. E. CrO is basic but Cr2O3Cr_2O_3 is amphoteric. Choose the correct answer from the options given below:

Basic character falls as the oxidation state rises

V2O3\text{V}_2\text{O}_3 is basic and V2O5\text{V}_2\text{O}_5 is amphoteric. Going from V2O3\text{V}_2\text{O}_3 to V2O5\text{V}_2\text{O}_5 the basic character decreases, it does not increase.

VO²⁺ and VO₂⁺ come from different oxides

V2O4\text{V}_2\text{O}_4 dissolves in acids to give VO2+\text{VO}^{2+} salts. V2O5\text{V}_2\text{O}_5 gives VO2+\text{VO}_2^+ salts with acids and VO43−\text{VO}_4^{3-} with alkalis.

Concept 4 of 4: Catalysts, interstitial compounds and alloys

A transition metal is a good catalyst for two reasons: it can change its oxidation state back and forth, and it can form bonds with the reacting molecules on its surface using its 3d and 4s electrons. Holding the reactants close together on the surface and weakening their bonds speeds the reaction up. The same open, metallic lattice can also trap small atoms such as H, C and N in its holes.

Definition

  • Catalysis: the metals and their compounds can adopt several oxidation states and form complexes. On a solid catalyst, bonds form between the reactant molecules and the surface atoms, which raises the concentration of reactants at the surface and weakens their bonds.
  • Fe3+\text{Fe}^{3+} catalyses the reaction between iodide and persulphate: 2I−+S2O82−→I2+2SO42−2\text{I}^- + \text{S}_2\text{O}_8^{2-} \rightarrow \text{I}_2 + 2\text{SO}_4^{2-}.
  • Interstitial compounds: small atoms (H, C, N) trapped inside the metal's crystal lattice, for example TiC, Mn4N\text{Mn}_4\text{N}, Fe3H\text{Fe}_3\text{H}, VH0.56\text{VH}_{0.56}, TiH1.7\text{TiH}_{1.7}. They are non-stoichiometric, have higher melting points than the pure metals, are very hard, keep metallic conductivity and are chemically inert.
  • Alloys: transition metals have similar atomic radii, so one metal's atoms can take the place of another's in the lattice and alloys form readily.
CatalystProcess it is used in
V2O5\text{V}_2\text{O}_5Contact process: oxidation of SO2\text{SO}_2 to SO3\text{SO}_3 in making H2SO4\text{H}_2\text{SO}_4
NEET 2026 matched V₂O₅, Fe, PdCl₂ and a nickel complex with their processes.
Finely divided ironHaber process: ammonia from a nitrogen and hydrogen mixture
NEET 2025 matched the Haber process, Wacker oxidation, Wilkinson catalyst and Ziegler catalyst.
NickelHydrogenation of fats and oils
PdCl2\text{PdCl}_2Wacker process: oxidation of ethyne to ethanal
Nickel complexesPolymerisation of alkynes and of other organic compounds such as benzene
TiCl4\text{TiCl}_4 with Al(CH3)3\text{Al(CH}_3\text{)}_3Ziegler catalyst, used to make polyethylene
[(Ph3P)3RhCl][(\text{Ph}_3\text{P})_3\text{RhCl}], Wilkinson catalystHydrogenation of alkenes
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2026 · NEET (UG) 2026 — 03 May 2026 · Q47Moderate

Example 4 · The d- and f-Block Elements · General Properties of Transition Elements

Match List I with List II :
List I (Transition metal/compound/complex)List II (Catalytic Role)
A. V2_2O5_5I. Preparation of ammonia from N2_2/H2_2 mixture
B. FeII. Polymerisation of alkynes
C. PdCl2_2III. Preparation of H2_2SO4_4 and SO2_2
D. Ni complexIV. Oxidation of ethyne to ethanal
Choose the correct answer from the options given below.

Interstitial compounds are not ordinary compounds

TiC or Fe3H\text{Fe}_3\text{H} is neither ionic nor covalent in the usual sense: the small atoms sit in holes of the metal lattice, the formula need not be a whole-number ratio, and the solid still conducts like a metal.

Two catalysts students swap

V2O5\text{V}_2\text{O}_5 is the catalyst of the contact process (sulphuric acid). Iron is the catalyst of the Haber process (ammonia).

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Reference tables (4)

Electronic configuration and metallic properties5 rows
PropertyTrend in the 3d seriesReason
Melting pointHigh; rises to a maximum near the middle, then falls(n−1)d electrons join ns electrons in metallic bonding
Re-NEET 2026: high melting points explained by 3d electrons bonding along with the 4s electrons.
Atomic and ionic radiusFalls along the seriesA d electron shields the outer electrons poorly from the rising nuclear charge
Ionisation enthalpyRises along the series, with small irregularitiesNuclear charge rises as the inner d orbitals fill
Configuration of Cr3d54s13d^5 4s^1, not 3d44s23d^4 4s^2A half-filled d subshell is extra stable
Configuration of Cu3d104s13d^{10} 4s^1, not 3d94s23d^9 4s^2A full d subshell is extra stable
Oxidation states and electrode potentials5 rows
CoupleE° in voltsWhat it means
Cu2+/Cu\text{Cu}^{2+}/\text{Cu}+0.34The only positive M²⁺/M value: Cu gives no hydrogen with dilute acid
NEET 2023: Cu²⁺ salts are more stable than Cu⁺ salts in water because of the hydration energy of Cu²⁺.
Cr3+/Cr2+\text{Cr}^{3+}/\text{Cr}^{2+}−0.41Negative: Cr2+\text{Cr}^{2+} is a strong reducing agent
Fe3+/Fe2+\text{Fe}^{3+}/\text{Fe}^{2+}+0.77Fe3+\text{Fe}^{3+} is only a mild oxidising agent; it is already d5d^5
Mn3+/Mn2+\text{Mn}^{3+}/\text{Mn}^{2+}+1.57Mn3+\text{Mn}^{3+} (d4d^4) gains an electron to reach stable d5d^5: a strong oxidising agent
NEET 2024: this couple is so positive because the change is from d⁴ to the half-filled d⁵.
Co3+/Co2+\text{Co}^{3+}/\text{Co}^{2+}+1.97Co3+\text{Co}^{3+} is a strong oxidising agent
Oxides of the transition metals7 rows
OxideOxidation state of the metalNature
CrO+2Basic
Cr2O3\text{Cr}_2\text{O}_3+3Amphoteric
CrO3\text{CrO}_3+6Acidic
V2O3\text{V}_2\text{O}_3+3Basic
V2O4\text{V}_2\text{O}_4+4Less basic; gives VO2+\text{VO}^{2+} salts with acids
NEET 2023: 'V₂O₄ dissolves in acids to give VO₄³⁻ salts' was one of the incorrect statements.
V2O5\text{V}_2\text{O}_5+5Amphoteric, mainly acidic
Mn2O7\text{Mn}_2\text{O}_7+7Acidic; a covalent green oil
Catalysts, interstitial compounds and alloys7 rows
CatalystProcess it is used in
V2O5\text{V}_2\text{O}_5Contact process: oxidation of SO2\text{SO}_2 to SO3\text{SO}_3 in making H2SO4\text{H}_2\text{SO}_4
NEET 2026 matched V₂O₅, Fe, PdCl₂ and a nickel complex with their processes.
Finely divided ironHaber process: ammonia from a nitrogen and hydrogen mixture
NEET 2025 matched the Haber process, Wacker oxidation, Wilkinson catalyst and Ziegler catalyst.
NickelHydrogenation of fats and oils
PdCl2\text{PdCl}_2Wacker process: oxidation of ethyne to ethanal
Nickel complexesPolymerisation of alkynes and of other organic compounds such as benzene
TiCl4\text{TiCl}_4 with Al(CH3)3\text{Al(CH}_3\text{)}_3Ziegler catalyst, used to make polyethylene
[(Ph3P)3RhCl][(\text{Ph}_3\text{P})_3\text{RhCl}], Wilkinson catalystHydrogenation of alkenes

Watch out for (9)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper