PYQ Vault

NEET Chemistry · Electrochemistry

Electrolysis, Batteries and Corrosion

Faraday's laws of electrolysis, the charge needed for a conversion, the products of electrolysis, the common primary and secondary batteries, fuel cells, and corrosion as an electrochemical process.

Why this matters

Four NEET questions from 2024 to 2026. Two find the mass of copper deposited from copper sulphate by a given current (2024, 2026). One matches four conversions to the number of faradays each needs (2024). One asks which of four processes is not corrosion (Re-NEET 2024).

Concept 1 of 3: Faraday's laws of electrolysis

In electrolysis an outside battery pushes electrons into a solution or a melt and forces a reaction that would not go by itself. Every ion reduced at the cathode takes a fixed number of electrons, so the amount of substance deposited is set by how much charge has passed. Count the moles of electrons, divide by the electrons each ion needs, and you have the moles deposited.

Definition

  • First law: the amount of chemical reaction at an electrode is proportional to the quantity of electricity passed: m=ZQm = ZQ, where Z is the electrochemical equivalent.
  • Second law: the same quantity of electricity liberates different substances in amounts proportional to their chemical equivalent weights (atomic mass divided by the electrons needed to reduce the cation).
  • Charge Q=ItQ = It, with I in amperes and t in seconds.
  • One faraday (F) is the charge on one mole of electrons: F=96487 C mol−1F = 96487\ \text{C mol}^{-1}, often rounded to 96500.
  • Mass deposited: m=M I tnFm = \dfrac{M\,I\,t}{nF}, where n is the number of electrons per ion (2 for Cu2++2e−→Cu\text{Cu}^{2+} + 2e^- \rightarrow \text{Cu}).

Mass deposited in electrolysis

Q=It,m=M I tnFQ = It, \qquad m = \frac{M\,I\,t}{nF}
  • MMmolar mass of the substance deposited
  • nnelectrons needed per ion
  • tttime, in seconds

Worked example

Two cells, one with CuSO₄ solution and one with AgNO₃ solution, are joined in series, so the same charge passes through both. 0.635 g of copper is deposited in the first. What mass of silver is deposited in the second? (Cu = 63.5, Ag = 108 g mol⁻¹)
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2024 · NEET (UG) 2024 — 05 May 2024 · Q92Moderate

Example 1 · Electrochemistry · Electrolysis, Batteries and Corrosion

Mass in grams of copper deposited by passing 9.6487 A current through a voltmeter containing copper sulphate solution for 100 seconds is (Given : Molar mass of Cu : 63 g mol−1mol^{-1}, 1 F = 96487 C)

Time in seconds

Q=ItQ = It needs t in seconds. Ten minutes is 600 s; putting in 10 gives an answer 60 times too small.

Divide by the electrons per ion

Cu²⁺ takes 2 electrons per atom, so the moles of copper are half the moles of electrons. Forgetting the 2 doubles the mass.

Concept 2 of 3: Charge for a conversion and products of electrolysis

The faradays a conversion needs are the moles of electrons it moves, and that is just the change in oxidation number times the moles of atoms that change. Which product appears is a separate question: when more than one reaction is possible at an electrode, the easier one wins. Water itself can be reduced or oxidised, so an aqueous solution often gives a different product from the same salt melted.

Definition

  • Faradays needed = moles of the species × electrons gained or lost per formula unit (the change in oxidation number).
  • MnO4−→Mn2+\text{MnO}_4^{-} \rightarrow \text{Mn}^{2+}: Mn goes from +7 to +2, so 5 F per mole.
  • Molten NaCl: sodium metal at the cathode, Cl₂ at the anode.
  • Aqueous NaCl: H₂ at the cathode (water is reduced more easily than Na⁺, since E∘(Na+/Na)=−2.71E^\circ(\text{Na}^{+}/\text{Na}) = -2.71 V); Cl₂ at the anode (oxygen would need an overpotential); NaOH is left in solution.
  • Dilute H₂SO₄: O₂ at the anode. Concentrated H₂SO₄: peroxodisulphate, S2O82−\text{S}_2\text{O}_8^{2-}, at the anode.
  • Aqueous CuSO₄ with copper electrodes: copper dissolves from the anode and is deposited on the cathode, the basis of refining copper.
  • An inert electrode (platinum, gold) takes no part in the reaction; a reactive electrode can.

Charge for a conversion

Faradays=moles×∣Δ(oxidation number)∣ per formula unit\text{Faradays} = \text{moles} \times \left|\Delta(\text{oxidation number})\right| \text{ per formula unit}

Worked example

How many faradays are needed to reduce 1 mol of dichromate ion, Cr2O72−\text{Cr}_2\text{O}_7^{2-}, to Cr3+\text{Cr}^{3+}?
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2024 · NEET (UG) 2024 — 05 May 2024 · Q77Hard

Example 2 · Electrochemistry · Electrolysis, Batteries and Corrosion

Match List I with List II.
List I (Conversion)List II (Number of Faraday required)
A. 1 mol of H2OH_2O to O2O_2I. 3F
B. 1 mol of MnO4−MnO_4^- to Mn2+Mn^{2+}II. 2F
C. 1.5 mol of Ca from molten CaCl2CaCl_2III. 1F
D. 1 mol of FeO to Fe2O3Fe_2O_3IV. 5F
Choose the correct answer from the options given below:

Say per mole of what

Getting aluminium from Al₂O₃ takes 3 F per mole of Al but 6 F per mole of Al₂O₃, which holds two Al atoms. Read which substance the question counts in moles before you multiply.

Molten and aqueous give different products

Molten NaCl gives sodium at the cathode. Aqueous NaCl gives hydrogen there, because water is reduced first.

Concept 3 of 3: Batteries, fuel cells and corrosion

A battery is a galvanic cell built to be useful: steady voltage, small and safe. A primary battery is used once and thrown away; a secondary battery can be recharged by passing current the other way. A fuel cell is a galvanic cell fed with fuel all the time. Corrosion is a galvanic cell nobody wanted: one spot of a metal surface acts as the anode and is slowly eaten away.

Definition

  • Primary batteries cannot be recharged: the dry (Leclanché) cell and the mercury cell.
  • Secondary batteries can be recharged: the lead storage battery and the nickel-cadmium cell.
  • Lead storage battery on discharge: Pb+PbO2+2H2SO4→2PbSO4+2H2O\text{Pb} + \text{PbO}_2 + 2\text{H}_2\text{SO}_4 \rightarrow 2\text{PbSO}_4 + 2\text{H}_2\text{O}. Charging reverses it.
  • Fuel cells turn the energy of combustion of a fuel such as hydrogen directly into electricity. In the hydrogen-oxygen cell: 2H2+O2→2H2O2\text{H}_2 + \text{O}_2 \rightarrow 2\text{H}_2\text{O}. It runs at about 70% efficiency, against about 40% for a thermal power plant.
  • Corrosion slowly coats a metal surface with its oxides or other salts: rusting of iron, tarnishing of silver, the green coating on copper and bronze.
  • Rusting: at an anode spot Fe→Fe2++2e−\text{Fe} \rightarrow \text{Fe}^{2+} + 2e^-; at a cathode spot O₂ is reduced with H⁺ (from carbonic acid in the water). Overall 2Fe+O2+4H+→2Fe2++2H2O2\text{Fe} + \text{O}_2 + 4\text{H}^{+} \rightarrow 2\text{Fe}^{2+} + 2\text{H}_2\text{O}, Ecell∘=1.67E^\circ_{cell} = 1.67 V. Fe²⁺ is oxidised further to rust, Fe2O3⋅xH2O\text{Fe}_2\text{O}_3 \cdot x\text{H}_2\text{O}.
  • Prevention: a coat of paint or chemicals, a coat of another metal (Sn, Zn), or a sacrificial electrode of a more active metal (Mg, Zn) that corrodes instead.
Cell or processKindWhat to remember
Dry (Leclanché) cellPrimaryZinc container anode; carbon rod cathode in MnO₂ and carbon; moist NH₄Cl and ZnCl₂ paste; about 1.5 V
Mercury cellPrimaryZinc-mercury amalgam anode; HgO and carbon cathode; KOH and ZnO paste; about 1.35 V, steady over its life
Lead storage batterySecondaryLead anode, PbO₂ cathode, 38% sulphuric acid; both electrodes turn to PbSO₄ on discharge
Nickel-cadmium cellSecondaryRechargeable, with a longer life than the lead storage battery
Hydrogen-oxygen fuel cellFuel cellPorous carbon electrodes with Pt or Pd catalyst, concentrated NaOH electrolyte; used in the Apollo space programme
Rusting of ironCorrosionIron is the anode and is oxidised; rust is hydrated ferric oxide
Re-NEET 2024: making hydrogen by electrolysis of water is not corrosion; rusting, tarnishing of silver and the green coat on copper are.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2024 · Re-NEET (UG) 2024 — 23 Jun 2024 · Q59Easy

Example 3 · Electrochemistry · Electrolysis, Batteries and Corrosion

From the following select the one which is not an example of corrosion.

Electrolysis is not corrosion

Corrosion is a metal being slowly oxidised by its surroundings. Splitting water by electrolysis is driven by an outside current and eats no metal.

Primary cells are not rechargeable

The dry cell and the mercury cell are primary: once used up they are thrown away. The lead storage battery and the nickel-cadmium cell are the secondary, rechargeable ones.

Iron is the anode in rusting

In rusting, iron loses electrons at an anode spot: iron is oxidised, never reduced. The species reduced is oxygen, together with H⁺, at another spot of the surface that acts as the cathode.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (2)

  • Faraday's laws of electrolysis

    Mass deposited in electrolysis

    Q=It,m=M I tnFQ = It, \qquad m = \frac{M\,I\,t}{nF}
  • Charge for a conversion and products of electrolysis

    Charge for a conversion

    Faradays=moles×∣Δ(oxidation number)∣ per formula unit\text{Faradays} = \text{moles} \times \left|\Delta(\text{oxidation number})\right| \text{ per formula unit}

Reference tables (1)

Batteries, fuel cells and corrosion6 rows
Cell or processKindWhat to remember
Dry (Leclanché) cellPrimaryZinc container anode; carbon rod cathode in MnO₂ and carbon; moist NH₄Cl and ZnCl₂ paste; about 1.5 V
Mercury cellPrimaryZinc-mercury amalgam anode; HgO and carbon cathode; KOH and ZnO paste; about 1.35 V, steady over its life
Lead storage batterySecondaryLead anode, PbO₂ cathode, 38% sulphuric acid; both electrodes turn to PbSO₄ on discharge
Nickel-cadmium cellSecondaryRechargeable, with a longer life than the lead storage battery
Hydrogen-oxygen fuel cellFuel cellPorous carbon electrodes with Pt or Pd catalyst, concentrated NaOH electrolyte; used in the Apollo space programme
Rusting of ironCorrosionIron is the anode and is oxidised; rust is hydrated ferric oxide
Re-NEET 2024: making hydrogen by electrolysis of water is not corrosion; rusting, tarnishing of silver and the green coat on copper are.

Watch out for (7)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper