PYQ Vault

NEET Chemistry · Hydrocarbons

Alkanes

How to name a branched alkane, the routes that make alkanes and what each does to the carbon count, why branching lowers the boiling point, the few reactions alkanes do give, and the conformations of ethane.

Why this matters

Eight NEET questions from 2021 to 2026. One names a branched alkane (NEET 2026). Three are about making alkanes: the missing reagent in soda lime decarboxylation (2021), the mass of methane from sodium ethanoate (2023) and a sequence that ends in a Wurtz-Fittig reaction (2023). Three are about properties and reactions: the boiling points of the three pentanes (NEET 2024), oxidising a tertiary C-H with KMnO₄ (Re-NEET 2024) and methane with steam (NEET 2026). One asks the dihedral angle of the least stable form of ethane (2021).

Concept 1 of 4: Naming a branched alkane

An IUPAC name is built in three moves. Find the longest carbon chain: it gives the parent name. Number it from the end that gives the branches the lowest numbers. Then write the branches in alphabetical order, each with its number. The longest chain is often bent on paper, so trace it through the branches before you count.

Definition

  • Parent chain: the longest continuous chain of carbon atoms, wherever it bends.
  • Numbering: start from the end that gives the substituents the lowest set of numbers (compare them at the first point of difference).
  • Order: substituents are written in alphabetical order (ethyl before methyl). The prefixes di, tri and tetra are ignored when ordering.
  • Only when both ends give the same set of numbers does the alphabet decide: the group named first gets the lower number.
  • Repeated groups take di, tri, tetra with a number for each: 2,2-dimethyl, never 2-dimethyl.

Worked example

Write the IUPAC name of (CH3)2CH-CH2-CH(CH2CH3)-CH2CH3\text{(CH}_3\text{)}_2\text{CH-CH}_2\text{-CH(CH}_2\text{CH}_3\text{)-CH}_2\text{CH}_3.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2026 · NEET (UG) 2026 — 03 May 2026 · Q55Moderate

Example 1 · Hydrocarbons · Alkanes

The correct IUPAC name of the following compound is :
CH3–CH2–CH(CH2CH3)–CH2–CH(CH3)–CH2–CH3\text{CH}_3\text{–CH}_2\text{–CH(CH}_2\text{CH}_3)\text{–CH}_2\text{–CH(CH}_3)\text{–CH}_2\text{–CH}_3
(A 3-ethyl and 5-methyl substituted heptane chain.)

The longest chain may run through a branch

Count every path from one end carbon to another. A chain drawn straight across the page is not always the longest one.

Lowest numbers first, alphabet second

Number the chain to give the lowest set of numbers. Only when both ends give the same set does the group that comes first in the alphabet get the lower number.

Di and tri do not count in the alphabet

In ordering, dimethyl is filed under m, so 3-ethyl-2,2-dimethylpentane writes ethyl first.

Concept 2 of 4: Preparing alkanes

Each route to an alkane does one of three things to the carbon chain. Adding hydrogen to an alkene or alkyne, or reducing an alkyl halide, keeps the chain the same length. The Wurtz reaction and Kolbe's electrolysis join two alkyl groups, so they double it. Heating the sodium salt of an acid with soda lime removes the COO part, so the alkane has one carbon fewer than the salt. Ask how many carbons the product needs before you pick a route.

Definition

  • Hydrogenation: H2\text{H}_2 adds to an alkene or alkyne with finely divided Pt or Pd at room temperature, or Ni at higher temperature and pressure.
  • Reduction of alkyl halides (not fluorides): zinc and dilute HCl give the alkane with the same carbons.
  • Wurtz reaction: 2R-X+2Na→dry etherR-R+2NaX2\text{R-X} + 2\text{Na} \xrightarrow{\text{dry ether}} \text{R-R} + 2\text{NaX}. The alkane has twice the carbons of the halide.
  • Decarboxylation: RCOONa+NaOH→heatCaOR-H+Na2CO3\text{RCOONa} + \text{NaOH} \xrightarrow[\text{heat}]{\text{CaO}} \text{R-H} + \text{Na}_2\text{CO}_3. The mixture of NaOH and CaO is soda lime. One carbon fewer.
  • Kolbe's electrolysis: an aqueous solution of the sodium or potassium salt of an acid is electrolysed; the alkane forms at the anode with twice the alkyl group, along with CO2\text{CO}_2.
  • Wurtz-Fittig reaction (NCERT Class 12): an alkyl halide and an aryl halide with sodium in dry ether give an alkylbenzene.
RouteReagentCarbon countExample
HydrogenationH2\text{H}_2 with Pt, Pd or NiSame as the alkenePropene gives propane
Reduction of an alkyl halideZn and dilute HClSame as the halideCH3Cl\text{CH}_3\text{Cl} gives methane
Wurtz reactionNa in dry etherTwice the alkyl groupCH3Br\text{CH}_3\text{Br} gives ethane
DecarboxylationSoda lime (NaOH and CaO), heatOne fewer than the saltSodium propanoate gives ethane
NEET 2021: CaO was the missing reagent. NEET 2023: two moles of methane from sodium ethanoate weigh 32 g.
Kolbe's electrolysisElectrolysis of the aqueous sodium saltTwice the alkyl groupSodium ethanoate gives ethane
Wurtz-Fittig reactionAlkyl halide, aryl halide, Na in dry etherAlkyl group joined to the ringBromoethane and bromobenzene give ethylbenzene
NEET 2023: the last step of a four-step sequence from ethanal.
Wurtz and Kolbe join two alkyl groups, so neither can make methane. Decarboxylation of sodium ethanoate can.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2023 · NEET (UG) 2023 — 07 May 2023 · Q61Moderate

Example 2 · Hydrocarbons · Alkanes

Weight (g) of two moles of the organic compound, which is obtained by heating sodium ethanoate with sodium hydroxide in presence of calcium oxide is:

Kolbe's electrolysis of sodium ethanoate gives ethane, not methane

Two methyl groups join at the anode. Methane from sodium ethanoate needs soda lime.

Soda lime removes a carbon

Sodium propanoate (3 carbons) gives ethane (2 carbons) with soda lime, because the carbon of the COONa group leaves as Na2CO3\text{Na}_2\text{CO}_3.

Alkyl fluorides are not reduced

Zinc and dilute HCl reduce alkyl chlorides, bromides and iodides to alkanes, but not fluorides.

Concept 3 of 4: Boiling points and reactions of alkanes

Alkanes are non-polar, so only weak forces hold their molecules together. A long straight chain touches its neighbours over a large area; a branched molecule is rounder, touches less, and boils lower. Alkanes are also unreactive: each reaction they give needs light, heat, a catalyst or a strong oxidant, and each is worth learning as a pair of reagent and product.

Definition

  • Boiling point rises with molar mass. Among isomers, more branching means a more spherical molecule, less surface contact, weaker forces and a lower boiling point: pentane 309.1 K, 2-methylbutane 301 K, 2,2-dimethylpropane 282.5 K.
  • Halogenation is a free radical substitution, started by light or heat. Hydrogens are replaced in the order 3° > 2° > 1°. Fluorine reacts too violently; iodination is slow and reversible.
  • Controlled oxidation: an alkane with a tertiary H is oxidised by KMnO4\text{KMnO}_4 to an alcohol. Other alkanes resist it.
  • Steam with methane: over nickel at 1273 K, methane and steam give carbon monoxide and hydrogen.
  • Isomerisation: n-alkanes heated with anhydrous AlCl3\text{AlCl}_3 and HCl give branched isomers.
  • Aromatisation: n-hexane over oxides of vanadium, molybdenum or chromium on alumina, at 773 K and 10 to 20 atm, gives benzene.
ReactionConditionsProduct
Isobutane, oxidation of the tertiary C-HKMnO4\text{KMnO}_42-Methylpropan-2-ol, (CH3)3COH\text{(CH}_3\text{)}_3\text{COH}
2CH4+O22\text{CH}_4 + \text{O}_2Cu, 523 K, 100 atmMethanol
CH4+O2\text{CH}_4 + \text{O}_2Mo2O3\text{Mo}_2\text{O}_3, heatMethanal (HCHO) and water
CH4+H2O\text{CH}_4 + \text{H}_2\text{O}Ni, 1273 KCO+3H2\text{CO} + 3\text{H}_2
NEET 2026: methane and steam over nickel give CO and H₂.
CH4+Cl2\text{CH}_4 + \text{Cl}_2Light (hν)CH3Cl\text{CH}_3\text{Cl} and HCl, then more substituted products
n-Hexane, aromatisationOxides of V, Mo or Cr on alumina, 773 K, 10 to 20 atmBenzene
Pentane isomers, boiling pointsBranchingPentane 309.1 K > 2-methylbutane 301 K > 2,2-dimethylpropane 282.5 K
NEET 2024: both statements, the order and the reason (spherical shape, less contact), were correct.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2024 · Re-NEET (UG) 2024 — 23 Jun 2024 · Q95Moderate

Example 3 · Hydrocarbons · Alkanes

The alkane that can be oxidized to the corresponding alcohol by KMnO4KMnO_4 as per the equation R2−C(R1)(R3)−H→KMnO4R2−C(R1)(R3)−OHR_2-C(R_1)(R_3)-H \xrightarrow{KMnO_4} R_2-C(R_1)(R_3)-OH is, when:

Only a tertiary H is oxidised by KMnO₄

Isobutane, with one H on a carbon bonded to three others, gives 2-methylpropan-2-ol. Methane, ethane and propane have no tertiary H and resist KMnO4\text{KMnO}_4.

Branching lowers the boiling point

Of isomers, the most branched boils lowest: 2,2-dimethylpropane boils at 282.5 K, pentane at 309.1 K.

Steam gives CO, not CO₂

Methane and steam over nickel at 1273 K give CO+3H2\text{CO} + 3\text{H}_2. Carbon dioxide is not the product of this reaction.

Concept 4 of 4: Conformations of ethane

The two carbons of ethane can turn about their single bond. Look straight down that bond. If the hydrogens of the back carbon sit exactly behind those of the front one, their bond pairs crowd each other: the eclipsed form. If they sit in the gaps, they are as far apart as they can be: the staggered form. The crowding is called torsional strain, so staggered is the most stable form and eclipsed the least.

Definition

  • Conformations are the shapes a molecule takes by rotation about a C-C single bond. There are infinitely many between the two extremes.
  • The dihedral (torsional) angle is the angle between a C-H bond on the front carbon and the nearest C-H bond on the back carbon.
  • Eclipsed: dihedral angle 0°, maximum torsional strain, least stable. Staggered: dihedral angle 60°, minimum torsional strain, most stable.
  • The energy difference is only about 12.5 kJ mol⁻¹, so the forms change into one another at room temperature and cannot be separated.
  • Drawn as a Sawhorse projection (the C-C bond as a long slanting line) or a Newman projection (looking along the C-C bond: the front carbon a point, the back carbon a circle).

Diagram · staggered and eclipsed ethane

HHHHHHHHHHHHStaggeredEclipseddihedral angle 60°most stabledihedral angle 0°least stablefront C-Hback C-Henergy, kJ mol⁻¹0°S60°E120°S180°E240°S300°E360°S12.5angle turned from staggered

S is staggered and E is eclipsed. Turning the back carbon 60° from staggered gives eclipsed; a further 60° gives staggered again. The two forms differ by only about 12.5 kJ mol⁻¹, so they change into each other at room temperature and cannot be separated. The eclipsed back bonds are drawn turned a little, only so they can be seen.

Worked example

In the staggered form of ethane, the back carbon is turned by 60°, and then by a further 60°. Name the form after each turn and give its dihedral angle.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2021 · NEET (UG) 2021 — 12 Sep 2021 · Q51Easy

Example 4 · Hydrocarbons · Alkanes

Dihedral angle of least stable conformer of ethane is :

Eclipsed is 0°, not 180°

The dihedral angle of eclipsed ethane is 0°, because each back C-H lies right behind a front C-H. Staggered ethane is 60°.

Conformations are not isomers you can isolate

Only 12.5 kJ mol⁻¹ separates eclipsed and staggered ethane, so they change into each other at room temperature and cannot be separated.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Reference tables (2)

Preparing alkanes6 rows
RouteReagentCarbon countExample
HydrogenationH2\text{H}_2 with Pt, Pd or NiSame as the alkenePropene gives propane
Reduction of an alkyl halideZn and dilute HClSame as the halideCH3Cl\text{CH}_3\text{Cl} gives methane
Wurtz reactionNa in dry etherTwice the alkyl groupCH3Br\text{CH}_3\text{Br} gives ethane
DecarboxylationSoda lime (NaOH and CaO), heatOne fewer than the saltSodium propanoate gives ethane
NEET 2021: CaO was the missing reagent. NEET 2023: two moles of methane from sodium ethanoate weigh 32 g.
Kolbe's electrolysisElectrolysis of the aqueous sodium saltTwice the alkyl groupSodium ethanoate gives ethane
Wurtz-Fittig reactionAlkyl halide, aryl halide, Na in dry etherAlkyl group joined to the ringBromoethane and bromobenzene give ethylbenzene
NEET 2023: the last step of a four-step sequence from ethanal.
Wurtz and Kolbe join two alkyl groups, so neither can make methane. Decarboxylation of sodium ethanoate can.
Boiling points and reactions of alkanes7 rows
ReactionConditionsProduct
Isobutane, oxidation of the tertiary C-HKMnO4\text{KMnO}_42-Methylpropan-2-ol, (CH3)3COH\text{(CH}_3\text{)}_3\text{COH}
2CH4+O22\text{CH}_4 + \text{O}_2Cu, 523 K, 100 atmMethanol
CH4+O2\text{CH}_4 + \text{O}_2Mo2O3\text{Mo}_2\text{O}_3, heatMethanal (HCHO) and water
CH4+H2O\text{CH}_4 + \text{H}_2\text{O}Ni, 1273 KCO+3H2\text{CO} + 3\text{H}_2
NEET 2026: methane and steam over nickel give CO and H₂.
CH4+Cl2\text{CH}_4 + \text{Cl}_2Light (hν)CH3Cl\text{CH}_3\text{Cl} and HCl, then more substituted products
n-Hexane, aromatisationOxides of V, Mo or Cr on alumina, 773 K, 10 to 20 atmBenzene
Pentane isomers, boiling pointsBranchingPentane 309.1 K > 2-methylbutane 301 K > 2,2-dimethylpropane 282.5 K
NEET 2024: both statements, the order and the reason (spherical shape, less contact), were correct.

Watch out for (11)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper