PYQ Vault

NEET Chemistry · Some Basic Concepts of Chemistry

Stoichiometry

Using a balanced equation to find masses and volumes of reactants and products, with impure reactants, solutions, limiting reagents and reactions between gases.

Why this matters

Five NEET questions, from 2022 to 2026. Two start from an impure reactant: 95% pure CaCO₃ to neutralise 50 mL of 0.5 M HCl (NEET 2022) and 20% pure limestone heated to give CO₂ (NEET 2023). One finds the NaOH left after 1 g of it reacts with 25 mL of 0.75 M HCl (NEET 2024), one burns 116 g of butane (Re-NEET 2026), and one finds the gases left after CO₂ passes over hot coke (NEET 2026).

Concept 1 of 4: Mole ratios from a balanced equation

A balanced equation is a recipe written in moles. Its coefficients say how many moles of each substance react or form, not how many grams. So every problem has three steps: grams to moles, moles across the equation by the coefficients, moles back to grams.

Definition

  • Balance the equation first. The same number of each kind of atom must appear on both sides.
  • The coefficients give the mole ratio: in CH4+2O2→CO2+2H2O\text{CH}_4 + 2\text{O}_2 \rightarrow \text{CO}_2 + 2\text{H}_2\text{O}, 1 mol of methane needs 2 mol of oxygen and gives 1 mol of CO2\text{CO}_2 and 2 mol of water.
  • In masses the same equation reads 16 g of methane + 64 g of oxygen gives 44 g of CO2\text{CO}_2 + 36 g of water: mass is conserved, but the masses are not in the ratio 1 : 2 : 1 : 2.
  • Method: given mass →\rightarrow moles →\rightarrow multiply by the ratio of coefficients →\rightarrow moles of the wanted substance →\rightarrow mass.

Mass to mass through moles

nB=nA×ba,mB=nB×MB(aA→bB)n_B = n_A \times \frac{b}{a}, \qquad m_B = n_B \times M_B \quad (a\text{A} \rightarrow b\text{B})
  • a,ba, bcoefficients of A and B in the balanced equation
  • nA,nBn_A, n_Bmoles of A used and of B formed
  • MBM_Bmolar mass of B

Worked example

Potassium chlorate decomposes on heating: 2KClO3→2KCl+3O22\text{KClO}_3 \rightarrow 2\text{KCl} + 3\text{O}_2. What mass of oxygen forms from 24.5 g of KClO3\text{KClO}_3 (molar mass 122.5 g mol−1^{-1})?
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2026 · Re-NEET (UG) 2026 — 21 Jun 2026 · Q63Moderate

Example 1 · Some Basic Concepts of Chemistry · Stoichiometry

The amount of carbon dioxide evolved upon complete combustion of 116 g of n-butane is (Given : atomic mass in amu H = 1, C = 12 and O = 16)

Coefficients are moles, not grams

In CH4+2O2→CO2+2H2O\text{CH}_4 + 2\text{O}_2 \rightarrow \text{CO}_2 + 2\text{H}_2\text{O}, 16 g of methane needs 64 g of oxygen, not 32 g. Turn grams into moles before you use the coefficients.

An unbalanced equation gives a wrong ratio

Balance the equation before reading any ratio from it. Burning C4H10\text{C}_4\text{H}_{10} gives 4 mol of CO2\text{CO}_2 per mole only once the equation is balanced.

Concept 2 of 4: Impure reactants and solutions

Only the pure part of a sample reacts. So before you turn a mass into moles, cut it down to the pure substance it contains. For a reactant in solution, the moles come from the concentration and the volume instead of from a mass.

Definition

  • Percentage purity =mass of pure substancemass of sample×100= \dfrac{\text{mass of pure substance}}{\text{mass of sample}} \times 100. The impurities are taken not to react.
  • Mass of pure substance =purity100×= \dfrac{\text{purity}}{100} \times mass of sample.
  • Working back: mass of sample needed =mass of pure substance neededpurity/100= \dfrac{\text{mass of pure substance needed}}{\text{purity}/100}.
  • Molarity (M) is moles of solute per litre of solution, so moles in a solution =M×V= M \times V in litres. (Molarity is taught in full in Solutions.)

Purity and moles in solution

mpure=purity100×msample,n=M×V(L)m_{\text{pure}} = \frac{\text{purity}}{100} \times m_{\text{sample}}, \qquad n = M \times V(\text{L})

Worked example

10 g of zinc that is 65% pure reacts with excess dilute HCl: Zn+2HCl→ZnCl2+H2\text{Zn} + 2\text{HCl} \rightarrow \text{ZnCl}_2 + \text{H}_2. What volume of hydrogen forms at STP (Zn = 65)?
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2023 · NEET (UG) 2023 — 07 May 2023 · Q71Moderate

Example 2 · Some Basic Concepts of Chemistry · Stoichiometry

The right option for the mass of CO2CO_2 produced by heating 20 g of 20% pure limestone is (Atomic mass of Ca = 40) [CaCO3→1200 KCaO+CO2][CaCO_3 \xrightarrow{1200\ K} CaO + CO_2]

Cut the sample down to its pure part first

Only the pure substance reacts. Multiply the sample mass by the purity before you divide by the molar mass; dividing the whole sample mass gives too many moles.

Millilitres must become litres

Molarity is moles per litre, so 50 mL of 0.5 M HCl holds 0.5×0.050=0.0250.5 \times 0.050 = 0.025 mol, not 25 mol.

Concept 3 of 4: Limiting reagent

When reactants are not mixed in the exact ratio of the equation, one runs out first and the reaction stops. That reactant, the limiting reagent, decides how much product forms. Whatever is left of the other reactant is the excess.

Definition

  • The limiting reagent is the reactant used up first. It sets the amount of every product.
  • To find it: divide the moles of each reactant by its coefficient in the balanced equation. The smallest result is the limiting reagent.
  • Amount of product: from the moles of the limiting reagent and the mole ratio.
  • Excess left == moles of the excess reactant present −- moles of it used by the limiting reagent.

Finding the limiting reagent

limiting reagent=smallest ncoefficient\text{limiting reagent} = \text{smallest } \frac{n}{\text{coefficient}}

Diagram · which reactant runs out first

2H₂ + O₂ → 2H₂ObeforeH₂: 4 g= 2 molO₂: 64 g= 2 molafterleft overH₂O: 2 mol= 36 gO₂: 1 mol= 32 gDivide moles by the coefficient:H₂: 2 ÷ 2 = 1, the smallest: H₂ limitsO₂: 2 ÷ 1 = 2, so O₂ is in excess2 mol H₂ use 1 mol O₂ and give 2 mol H₂O; O₂ left = 2 − 1 = 1 mol.Each shape is 1 mol of molecules.

Worked example

4 g of hydrogen and 64 g of oxygen are allowed to react: 2H2+O2→2H2O2\text{H}_2 + \text{O}_2 \rightarrow 2\text{H}_2\text{O}. Which is the limiting reagent, what mass of water forms, and what is left over?
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2024 · NEET (UG) 2024 — 05 May 2024 · Q85Hard

Example 3 · Some Basic Concepts of Chemistry · Stoichiometry

1 gram of sodium hydroxide was treated with 25 mL of 0.75 M HCl solution, the mass of sodium hydroxide left unreacted is equal to

Fewer moles does not always mean limiting

Divide each reactant's moles by its coefficient before you compare. With 2 mol of H2\text{H}_2 and 1 mol of N2\text{N}_2, hydrogen limits even though there is more of it, because the equation needs 3 mol of H2\text{H}_2 per mole of N2\text{N}_2.

The excess left is not the excess present

Subtract what the limiting reagent used up. The amount left is what was added minus what reacted.

Concept 4 of 4: Volume relations in gas reactions

Equal volumes of gases at the same temperature and pressure hold equal numbers of molecules. So for gases the coefficients of a balanced equation are also a volume ratio. Solids and liquids take part in the reaction but add almost nothing to the gas volume.

Definition

  • At the same temperature and pressure, the volume ratio of gases equals their mole ratio (Avogadro's law).
  • In 2CO+O2→2CO22\text{CO} + \text{O}_2 \rightarrow 2\text{CO}_2, 2 L of CO react with 1 L of O2\text{O}_2 and give 2 L of CO2\text{CO}_2.
  • Count only the gases. A solid (carbon, coke) or a liquid (water after cooling) has no gas volume.
  • For a mass-to-volume problem, change moles to a volume with 22.7 L per mole at STP.
  • When the total volume changes, let x be the volume that reacts and write each gas in terms of x.

Gas volumes at the same temperature and pressure

V1V2=n1n2,V=n×22.7 L mol−1 (STP)\frac{V_1}{V_2} = \frac{n_1}{n_2}, \qquad V = n \times 22.7\ \text{L mol}^{-1}\ (\text{STP})

Worked example

2 L of carbon monoxide burns completely in oxygen: 2CO+O2→2CO22\text{CO} + \text{O}_2 \rightarrow 2\text{CO}_2. All volumes are at the same temperature and pressure. What volume of oxygen is used, what volume of CO2\text{CO}_2 forms, and by how much does the total gas volume change?
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2026 · NEET (UG) 2026 — 03 May 2026 · Q84Moderate

Example 4 · Some Basic Concepts of Chemistry · Stoichiometry

When 1 dm3^3 of CO2_2 gas is passed over hot coke the volume of gaseous mixture after complete reaction at STP becomes 1.4 dm3^3. The composition of the gaseous mixture at STP is:

Solids and liquids have no gas volume

In C+CO2→2CO\text{C} + \text{CO}_2 \rightarrow 2\text{CO}, the carbon is a solid, so 1 volume of gas becomes 2 volumes. Liquid water after cooling also adds nothing to the gas volume.

Volume ratio needs the same temperature and pressure

Coefficients are a volume ratio only when every gas is measured at the same temperature and pressure. Otherwise go through moles.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (4)

  • Mole ratios from a balanced equation

    Mass to mass through moles

    nB=nA×ba,mB=nB×MB(aA→bB)n_B = n_A \times \frac{b}{a}, \qquad m_B = n_B \times M_B \quad (a\text{A} \rightarrow b\text{B})
  • Impure reactants and solutions

    Purity and moles in solution

    mpure=purity100×msample,n=M×V(L)m_{\text{pure}} = \frac{\text{purity}}{100} \times m_{\text{sample}}, \qquad n = M \times V(\text{L})
  • Limiting reagent

    Finding the limiting reagent

    limiting reagent=smallest ncoefficient\text{limiting reagent} = \text{smallest } \frac{n}{\text{coefficient}}
  • Volume relations in gas reactions

    Gas volumes at the same temperature and pressure

    V1V2=n1n2,V=n×22.7 L mol−1 (STP)\frac{V_1}{V_2} = \frac{n_1}{n_2}, \qquad V = n \times 22.7\ \text{L mol}^{-1}\ (\text{STP})

Watch out for (8)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper