PYQ Vault

NEET Chemistry · Thermodynamics

The First Law and Work

Systems and surroundings, state functions, extensive and intensive properties, the four kinds of process, the first law ΔU = q + w with chemistry's signs, and the work a gas does when it expands.

Why this matters

Six NEET questions from 2022 to 2026. One matches four processes to their conditions (2024), one applies ΔU = q + w to heat taken in and work done by the system (2026), one asks for the work and heat when a gas expands into a vacuum (Re-NEET 2024), and three are about work: a reversible isothermal expansion worked out in calories (2024), the p-V graph with the most work (2022) and the work in a cycle of two isothermal and two adiabatic steps (Re-NEET 2026).

Concept 1 of 3: Systems, processes and state functions

Thermodynamics needs a clear line between what we study and everything else. The part we study, say the gas in a cylinder or the reaction in a flask, is the system; the rest is the surroundings. We describe the system by a few measurable quantities such as pressure, volume and temperature. Some quantities depend only on where the system is now (its state), others depend on how it got there (the path). Telling these apart is the first skill of the chapter.

Definition

  • Open system: exchanges both energy and matter with the surroundings (reactants in an open beaker). Closed system: exchanges energy but not matter (a closed vessel of conducting material). Isolated system: exchanges neither (reactants in a thermos flask).
  • State functions depend only on the state, not on the path: pp, VV, TT, UU, HH, SS, GG. Heat qq and work ww depend on the path, but their sum q+w=ΔUq + w = \Delta U does not.
  • Extensive properties depend on the amount of matter: mass, volume, internal energy, enthalpy, entropy, heat capacity. Intensive properties do not: temperature, pressure, density, molar heat capacity.
  • The ratio of two extensive properties is intensive: density is mass divided by volume.
  • A reversible process goes infinitely slowly through a series of equilibrium states, so the system and the surroundings are always in near equilibrium with each other. Any other process is irreversible.
ProcessWhat is fixedWhat follows
IsothermalTemperature, ΔT=0\Delta T = 0For an ideal gas ΔU=0\Delta U = 0
IsochoricVolume, ΔV=0\Delta V = 0No expansion work, w=0w = 0
IsobaricPressure, Δp=0\Delta p = 0Heat taken in equals ΔH\Delta H
AdiabaticNo heat crosses the boundary, q=0q = 0ΔU=wad\Delta U = w_{ad}
CyclicThe system returns to its starting stateΔU=0\Delta U = 0, since U is a state function
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2024 · NEET (UG) 2024 — 05 May 2024 · Q56Easy

Example 1 · Thermodynamics · The First Law and Work

Match List I with List II.
List-I (Process)List-II (Conditions)
A. Isothermal processI. No heat exchange
B. Isochoric processII. Carried out at constant temperature
C. Isobaric processIII. Carried out at constant volume
D. Adiabatic processIV. Carried out at constant pressure
Choose the correct answer from the options given below:

A ratio of two extensive properties is intensive

Mass and volume both depend on the amount, but density (mass per volume) does not. In the same way molarity and specific heat are intensive.

Adiabatic does not mean isothermal

In an adiabatic process no heat crosses the boundary, but the temperature can still change: a gas that expands adiabatically cools, because the work it does comes out of its internal energy.

Concept 2 of 3: The first law with chemistry's signs

Internal energy U is all the energy stored in a system: the motion of its molecules and the energy in its bonds. We cannot measure U itself, only its change. It changes in just two ways: heat flows in or out, or work is done on or by the system. Chemistry keeps the books from the system's side, so anything that adds energy to the system counts as positive.

Definition

  • First law: ΔU=q+w\Delta U = q + w. Energy is neither created nor destroyed; the energy of an isolated system is constant.
  • qq is positive when the system absorbs heat and negative when it gives heat out.
  • ww is positive when work is done on the system (compression) and negative when the system does work (expansion).
  • At constant volume no expansion work is done, so ΔU=qV\Delta U = q_V.
  • In an adiabatic change q=0q = 0, so ΔU=wad\Delta U = w_{ad}.
  • The internal energy of an ideal gas depends only on its temperature, so in an isothermal change ΔU=0\Delta U = 0 and q=−wq = -w.

First law

ΔU=q+w\Delta U = q + w
  • qqheat absorbed by the system
  • wwwork done on the system

Worked example

A system gives out 120 J of heat to its surroundings while the surroundings do 300 J of work on it. Find the change in its internal energy.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2026 · NEET (UG) 2026 — 03 May 2026 · Q74Easy

Example 2 · Thermodynamics · The First Law and Work

At a certain temperature, T (K), during a process, 500 J is absorbed by the system and work of 200 J is done by the system. Then change in internal energy of the system is :

Work done by the system is negative

In ΔU=q+w\Delta U = q + w the work is the work done on the system. When a gas expands and does 200 J of work, w=−200w = -200 J. Physics books write the same law as ΔU=Q−W\Delta U = Q - W with W done by the gas; do not mix the two conventions in one sum.

Heat given out is negative

Heat the system releases to the surroundings enters the first law with a minus sign. Only heat absorbed by the system is positive.

Free expansion does no work and takes no heat

A gas expanding into a vacuum pushes against zero pressure, so w=0w = 0. For an ideal gas at constant temperature ΔU=0\Delta U = 0 as well, so q=0q = 0.

Concept 3 of 3: Work of expansion

A gas that expands pushes back whatever holds it in, the piston and the air beyond it, and so does work. The work depends on the pressure it pushes against and on how far the volume changes. If the gas expands slowly, with the outside pressure kept only a little below its own at every stage, it pushes against the largest pressure it can and does the most work.

Definition

  • Against a constant external pressure: w=−pexΔV=−pex(Vf−Vi)w = -p_{ex}\Delta V = -p_{ex}(V_f - V_i). Expansion gives negative w, compression positive w.
  • Free expansion into a vacuum: pex=0p_{ex} = 0, so w=0w = 0. No work is done in the free expansion of an ideal gas, whether the process is reversible or irreversible.
  • Reversible isothermal expansion of an ideal gas: wrev=−2.303 nRTlog⁡VfViw_{rev} = -2.303\,nRT\log\dfrac{V_f}{V_i}. At constant temperature VfVi=pipf\dfrac{V_f}{V_i} = \dfrac{p_i}{p_f}, so wrev=−2.303 nRTlog⁡pipfw_{rev} = -2.303\,nRT\log\dfrac{p_i}{p_f}.
  • On a p-V graph the work is the area under the curve. Between the same two volumes, the path at higher pressure encloses more area, so a reversible expansion gives more work than an expansion against a constant low pressure.
  • In an adiabatic step q=0q = 0, so w=ΔUw = \Delta U.
  • Units: 1 L atm = 101.3 J. With R = 8.314 J/(K mol) the work comes out in joules; with R = 2 cal/(K mol), in calories.

Work of expansion

w=−pexΔV,wrev=−2.303 nRTlog⁡VfVi=−2.303 nRTlog⁡pipfw = -p_{ex}\Delta V, \qquad w_{rev} = -2.303\,nRT\log\frac{V_f}{V_i} = -2.303\,nRT\log\frac{p_i}{p_f}
  • pexp_{ex}external pressure the gas pushes against
  • Vi,VfV_i, V_finitial and final volumes
  • pi,pfp_i, p_finitial and final pressures

Diagram · work of expansion as an area

123p (atm)V (L)pexΔV = 3 L atmVi = 2Vf = 5pex = 1 atmreversible, isothermal:more area, more workw = −pexΔV = −3 L atm = −303.9 J

w is the work done on the gas. In an expansion the gas pushes the surroundings back, so w is negative: here w = −3 × 101.3 = −303.9 J. Between the same two volumes the reversible path runs at higher pressure, so it encloses more area and the gas does more work.

Worked example

Two moles of an ideal gas expand isothermally and reversibly at 300 K from 1 L to 10 L. Find the work done on the gas (R = 8.314 J/(K mol)).
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2024 · NEET (UG) 2024 — 05 May 2024 · Q91Moderate

Example 3 · Thermodynamics · The First Law and Work

The work done during reversible isothermal expansion of one mole of hydrogen gas at 25°C from pressure of 20 atmosphere to 10 atmosphere is (Given R = 2.0 cal K−1K^{-1} mol−1mol^{-1})

Use the external pressure

In w=−pexΔVw = -p_{ex}\Delta V the pressure is the one the gas pushes against, not the gas's own starting pressure. Against a vacuum it is zero, whatever the gas pressure was.

The pressure ratio is upside down

For an isothermal ideal gas VfVi=pipf\dfrac{V_f}{V_i} = \dfrac{p_i}{p_f}. Writing log⁡pfpi\log\dfrac{p_f}{p_i} for an expansion flips the sign of the work.

Litre atmospheres are not joules

pΔVp\Delta V in atm and litres gives L atm. Multiply by 101.3 to get joules before comparing with answers in J.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (2)

  • The first law with chemistry's signs

    First law

    ΔU=q+w\Delta U = q + w
  • Work of expansion

    Work of expansion

    w=−pexΔV,wrev=−2.303 nRTlog⁡VfVi=−2.303 nRTlog⁡pipfw = -p_{ex}\Delta V, \qquad w_{rev} = -2.303\,nRT\log\frac{V_f}{V_i} = -2.303\,nRT\log\frac{p_i}{p_f}

Reference tables (1)

Systems, processes and state functions5 rows
ProcessWhat is fixedWhat follows
IsothermalTemperature, ΔT=0\Delta T = 0For an ideal gas ΔU=0\Delta U = 0
IsochoricVolume, ΔV=0\Delta V = 0No expansion work, w=0w = 0
IsobaricPressure, Δp=0\Delta p = 0Heat taken in equals ΔH\Delta H
AdiabaticNo heat crosses the boundary, q=0q = 0ΔU=wad\Delta U = w_{ad}
CyclicThe system returns to its starting stateΔU=0\Delta U = 0, since U is a state function

Watch out for (8)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper