PYQ Vault

NEET Physics · Dual Nature of Radiation and Matter

Photoelectric Effect

Electrons knocked out of a metal by light: how the photocurrent and the stopping potential respond to intensity and frequency, the work function and threshold, and Einstein's equation Kmax = hν − φ₀.

Why this matters

Seven NEET questions from 2022 to 2026. Two read the experiment (current against intensity in 2025, current and stopping potential as the lamp dims in Re-NEET 2026), two use the threshold (which metals emit in 2023, which wavelength fails in 2026) and three use Einstein's equation: a threshold frequency from two stopping potentials (2022), a maximum kinetic energy (Re-NEET 2024) and three cells compared (Re-NEET 2026).

Concept 1 of 3: What intensity and frequency change

Shine light on a clean metal plate inside an evacuated tube and electrons fly out to a collector plate, making a photocurrent. Make the collector more positive and the current rises to a steady saturation value. Make it negative and fewer electrons reach it, until at the stopping potential even the fastest ones are turned back. Two things can be changed about the light, and they do different jobs: intensity sets how many electrons come out, frequency sets how fast the fastest ones are.

Definition

  • Electrons leave a metal only when given at least a minimum energy, the work function. Heat (thermionic emission), a strong field (field emission) or light (photoelectric emission) can supply it.
  • Zinc, cadmium and magnesium give photoelectrons only with ultraviolet light; alkali metals such as sodium and caesium give them with visible light too.
  • Photocurrent is directly proportional to the intensity of the light, at a fixed frequency.
  • Stopping potential V0V_0 is the negative collector potential that just makes the photocurrent zero: eV0=Kmax⁡eV_0 = K_{\max}. It does not depend on the intensity; it rises with the frequency.
  • Below a threshold frequency ν0\nu_0 there is no emission, however intense the light. Above it, emission starts at once, with a delay of 10−910^{-9} s or less.

Diagram · reading the photoelectric graphs

1. Same frequency, two intensities
photocurrent Ianode potential V0higher intensitylower intensity−V₀same cut-off

The saturation level shows the intensity. The cut-off is the same, so the frequency is the same.

2. Same intensity, two frequencies
photocurrent Ianode potential V0−2 V−1 Vhigher νlower νsame saturation

Same saturation current, so the same intensity. The curve cutting off at −2 V has the larger stopping potential, so the higher frequency.

3. Stopping potential against frequency
stopping potential V₀frequency ν (10¹⁴ Hz)04.8φ = 2.0 eV9.7φ = 4.0 eVslope h/e, both linesν₀ν₀

Slope h/e = 6.6 × 10⁻³⁴ / 1.6 × 10⁻¹⁹ ≈ 4.1 × 10⁻¹⁵ V s for every metal. Each line cuts the axis at its threshold frequency; the line further right has the larger work function. Kₘₐₓ against ν is the same line scaled by e: it starts at ν₀ with slope h.

What you changePhotocurrentStopping potential and maximum KE
Intensity up, frequency fixedrises in proportionno change
Frequency up, above thresholdstill flowsboth rise
Frequency below thresholdzero, however bright the lightno electrons come out
Source moved farther awayfalls, since the intensity fallsno change
Collector made more negativefalls, and is zero at −V0-V_0V0V_0 is fixed by the frequency and the metal
Intensity controls how many electrons come out; frequency controls how much energy the fastest one has.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2026 · Re-NEET (UG) 2026 — 21 Jun 2026 · Q8Moderate

Example 1 · Dual Nature of Radiation and Matter · Photoelectric Effect

A beam of light falls on a metal surface such that photo-electrons are generated. If power of the light source starts to decrease linearly with time t, then variation of the photocurrent I and magnitude of the stopping potential ∣V∣|V| with time is best represented by :

Intensity never moves the stopping potential

Brighter light gives more photoelectrons and a larger current, but the same maximum kinetic energy and the same stopping potential.

No emission below the threshold

Below the threshold frequency no electron comes out, however intense the light or however long it shines. Waiting longer does not help.

Distance only changes the intensity

Moving a lamp farther from the cell lowers the intensity at the cell. The current falls; the stopping potential stays the same.

Concept 2 of 3: Work function and threshold

An electron is held inside a metal, and the work function is the smallest energy that can pull one out through the surface. One photon gives its energy to one electron. If that photon's energy is less than the work function, nothing happens, however many photons arrive. The threshold frequency and threshold wavelength mark exactly where the photon energy equals the work function.

Definition

  • Work function ϕ0\phi_0: the least energy needed to free an electron from the metal surface. It depends on the metal and on the state of its surface.
  • Threshold frequency: ν0=ϕ0h\nu_0 = \dfrac{\phi_0}{h}. Threshold wavelength: λ0=hcϕ0\lambda_0 = \dfrac{hc}{\phi_0}.
  • Emission happens only if ν≥ν0\nu \ge \nu_0, that is, λ≤λ0\lambda \le \lambda_0.
  • Quick rule: λ0 (nm)=1240ϕ0 (eV)\lambda_0\,(\text{nm}) = \dfrac{1240}{\phi_0\,(\text{eV})}.
  • Some work functions: caesium 2.14 eV, potassium 2.30 eV, sodium 2.75 eV. Caesium has the smallest of the common metals.

Threshold

ϕ0=hν0=hcλ0,λ0 (nm)=1240ϕ0 (eV)\phi_0 = h\nu_0 = \frac{hc}{\lambda_0}, \qquad \lambda_0\,(\text{nm}) = \frac{1240}{\phi_0\,(\text{eV})}
  • ϕ0\phi_0work function of the metal
  • ν0\nu_0threshold frequency
  • λ0\lambda_0threshold wavelength

Worked example

The threshold frequency of a metal is 5×10145 \times 10^{14} Hz. Find its work function in eV. (h=6.6×10−34h = 6.6 \times 10^{-34} J s)
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2026 · NEET (UG) 2026 — 03 May 2026 · Q42Moderate

Example 2 · Dual Nature of Radiation and Matter · Photoelectric Effect

For a metal of work function 6.6 eV, which of the following wavelengths of incident radiation does not give rise to the photoelectric effect? (Take Planck's constant as 6.6×10−346.6 \times 10^{-34} J s)

Shorter wavelength, more energy

Light ejects electrons only if its wavelength is shorter than the threshold wavelength λ0\lambda_0. A wavelength longer than λ0\lambda_0 fails however bright the light.

A smaller work function means a longer threshold wavelength

λ0=hc/ϕ0\lambda_0 = hc/\phi_0, so the metal that frees electrons most easily is the one that still works with the longest, reddest light.

Concept 3 of 3: Einstein's photoelectric equation

One photon gives all its energy hνh\nu to one electron. Part of it, at least the work function, is spent getting out of the metal. Whatever is left is kinetic energy. The electrons nearest the surface lose the least, so they come out fastest, with the maximum kinetic energy. The stopping potential is just the voltage that can turn back these fastest electrons.

Definition

  • Kmax⁡=hν−ϕ0=h(ν−ν0)K_{\max} = h\nu - \phi_0 = h(\nu - \nu_0).
  • Kmax⁡=eV0K_{\max} = eV_0, so V0=heν−ϕ0eV_0 = \dfrac{h}{e}\nu - \dfrac{\phi_0}{e}. In eV and volts: V0V_0 in volts equals hν−ϕ0h\nu - \phi_0 in eV.
  • Graph of V0V_0 against ν\nu: a straight line of slope he\dfrac{h}{e}, the same for every metal, cutting the frequency axis at ν0\nu_0.
  • Graph of Kmax⁡K_{\max} against ν\nu: a straight line of slope h, again cutting the frequency axis at ν0\nu_0.
  • Electrons come out with every energy from zero up to Kmax⁡K_{\max}.

Einstein's equation

Kmax⁡=hν−ϕ0=eV0,V0=he ν−ϕ0eK_{\max} = h\nu - \phi_0 = eV_0, \qquad V_0 = \frac{h}{e}\,\nu - \frac{\phi_0}{e}
  • Kmax⁡K_{\max}largest kinetic energy of the photoelectrons
  • V0V_0stopping potential
  • ϕ0\phi_0work function

Worked example

Light of wavelength 310 nm falls on a metal of work function 2.5 eV. Find the maximum kinetic energy of the photoelectrons and the stopping potential.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2026 · Re-NEET (UG) 2026 — 21 Jun 2026 · Q18Moderate

Example 3 · Dual Nature of Radiation and Matter · Photoelectric Effect

A ray of light with wavelength λ\lambda is incident on three different photo-electric cells namely 1, 2 and 3. The threshold wavelength of these photo-electric cells are λ1\lambda_1, λ2\lambda_2 and λ3\lambda_3, respectively and the magnitude of stopping potentials of these cells are V1V_1, V2V_2 and V3V_3, respectively. The relation between λ\lambda and threshold wavelengths are λ1<λ\lambda_1 < \lambda, λ2>λ\lambda_2 > \lambda and λ3≫λ\lambda_3 \gg \lambda. The correct option is :

Maximum, not every electron's energy

hν−ϕ0h\nu - \phi_0 is the largest kinetic energy. Electrons from deeper inside lose more on the way out and come out slower, down to zero.

eV and volts match one for one

A maximum kinetic energy of 1.5 eV means a stopping potential of 1.5 V. Converting to joules and back is not needed.

Every metal gives the same slope

The lines of V0V_0 against ν\nu for different metals are parallel, all with slope h/eh/e. Only where they cut the frequency axis, ν0\nu_0, changes.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (2)

  • Work function and threshold

    Threshold

    ϕ0=hν0=hcλ0,λ0 (nm)=1240ϕ0 (eV)\phi_0 = h\nu_0 = \frac{hc}{\lambda_0}, \qquad \lambda_0\,(\text{nm}) = \frac{1240}{\phi_0\,(\text{eV})}
  • Einstein's photoelectric equation

    Einstein's equation

    Kmax⁡=hν−ϕ0=eV0,V0=he ν−ϕ0eK_{\max} = h\nu - \phi_0 = eV_0, \qquad V_0 = \frac{h}{e}\,\nu - \frac{\phi_0}{e}

Reference tables (1)

What intensity and frequency change5 rows
What you changePhotocurrentStopping potential and maximum KE
Intensity up, frequency fixedrises in proportionno change
Frequency up, above thresholdstill flowsboth rise
Frequency below thresholdzero, however bright the lightno electrons come out
Source moved farther awayfalls, since the intensity fallsno change
Collector made more negativefalls, and is zero at −V0-V_0V0V_0 is fixed by the frequency and the metal
Intensity controls how many electrons come out; frequency controls how much energy the fastest one has.

Watch out for (8)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper