PYQ Vault

NEET Physics · Electric Charges and Fields

Gauss's Law and Conductors

Electric flux as the field lines through a surface, Gauss's law (flux out of a closed surface = enclosed charge ÷ ε₀) and the fields it gives for a line, a sheet and a shell, and the rules for the field in and around a conductor.

Why this matters

Three NEET questions, all from 2023 or later. One asks what a zero net flux through a closed surface tells you (2023), one checks five statements about charged conductors (NEET 2026) and one compares the fields inside the cavity of a conducting sphere and outside it, with a charge in the cavity (Re-NEET 2026).

Concept 1 of 2: Electric flux and Gauss's law

Flux counts how many field lines pass through a surface. Take any closed surface, like a balloon. A field line from a charge outside enters the balloon and leaves it again, so it adds nothing to the net count. Only charge inside the balloon sends out lines that are not matched by lines coming in. Gauss's law turns that count into a rule: the net flux out depends only on the charge enclosed.

Definition

  • Flux through a flat area in a uniform field: ϕ=EAcos⁡θ\phi = EA\cos\theta, where θ is the angle between E⃗\vec{E} and the normal to the area. Unit N m² C⁻¹.
  • Gauss's law: ∮E⃗⋅dA⃗=qencε0\oint \vec{E}\cdot d\vec{A} = \dfrac{q_{\text{enc}}}{\varepsilon_0} for any closed surface.
  • Charges outside give zero net flux. The flux does not depend on the shape or size of the surface, or on where the charge sits inside it.
  • The field on the surface is caused by all charges, inside and outside. Only the net flux is fixed by the enclosed charge.
  • A charge q at the centre of a cube sends q6ε0\dfrac{q}{6\varepsilon_0} through each face.
  • Uses: a long straight line of charge E=λ2πε0rE = \dfrac{\lambda}{2\pi\varepsilon_0 r}; a large plane sheet E=σ2ε0E = \dfrac{\sigma}{2\varepsilon_0}, the same at every distance; a thin charged spherical shell E=kqr2E = \dfrac{kq}{r^{2}} outside it and zero inside it.

Flux and Gauss's law

ϕ=EAcos⁡θ,∮E⃗⋅dA⃗=qencε0\phi = EA\cos\theta, \qquad \oint \vec{E}\cdot d\vec{A} = \frac{q_{\text{enc}}}{\varepsilon_0}
  • θ\thetaangle between the field and the normal to the area
  • qencq_{\text{enc}}total charge inside the closed surface

Worked example

A point charge of 8.85 nC sits at the centre of a cube. Find the flux through the whole cube and through one face. Take ε0=8.85×10−12 C2 N−1 m−2\varepsilon_0 = 8.85 \times 10^{-12}\ \text{C}^{2}\,\text{N}^{-1}\,\text{m}^{-2}.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2023 · NEET (UG) 2023 — 07 May 2023 · Q32Easy

Example 1 · Electric Charges and Fields · Gauss's Law and Conductors

If ∮sE⃗⋅dS⃗=0\oint_s \vec{E} \cdot \vec{dS} = 0 over a surface, then

Zero flux does not mean zero field

The net flux depends only on the enclosed charge, but the field on the surface comes from every charge, inside and outside. A surface with no charge inside can still have a strong field on it.

Measure the angle from the normal

In ϕ=EAcos⁡θ\phi = EA\cos\theta the angle is between the field and the normal to the area. A field lying along the surface gives zero flux.

A plane sheet's field does not fall with distance

For a large plane sheet E=σ2ε0E = \dfrac{\sigma}{2\varepsilon_0} at every distance. Only the line charge's field (as 1/r1/r) and the shell's field outside (as 1/r21/r^{2}) fall off.

Concept 2 of 2: Conductors in electrostatics

A conductor is full of free electrons. If any field were left inside it, they would keep moving, so in the steady state they settle exactly where the field inside becomes zero. That one fact gives every other rule: the extra charge has to sit on the surface, the field just outside must stand straight out from the surface, and a hollow space inside a conductor is cut off from fields outside it.

Definition

  • Inside a conductor in the static state, the electric field is zero.
  • The interior has no excess charge; any extra charge sits on the surface.
  • Just outside the surface the field is normal to the surface at every point, with size E=σε0E = \dfrac{\sigma}{\varepsilon_0}.
  • The potential is the same at every point of the conductor, inside and on the surface. It is constant, not necessarily zero.
  • Shielding: inside an empty cavity of a conductor the field is zero, whatever charges and fields are outside.
  • A charge q placed in a cavity draws −q onto the cavity wall and leaves +q on the outer surface. The field in the cavity is then not zero. For a conducting sphere the outer charge spreads evenly, so outside the field is kqr2\dfrac{kq}{r^{2}} measured from the sphere's centre.

Field of a conductor

Einside=0,Esurface=σε0 (normal to the surface)E_{\text{inside}} = 0, \qquad E_{\text{surface}} = \frac{\sigma}{\varepsilon_0}\ \text{(normal to the surface)}
  • σ\sigmasurface charge density at that point of the surface

Worked example

A charged conductor has a surface charge density of 8.85×10−78.85 \times 10^{-7} C/m² at one point. Find the field just outside it there, and the field just inside. Take ε0=8.85×10−12 C2 N−1 m−2\varepsilon_0 = 8.85 \times 10^{-12}\ \text{C}^{2}\,\text{N}^{-1}\,\text{m}^{-2}.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2026 · NEET (UG) 2026 — 03 May 2026 · Q41Moderate

Example 2 · Electric Charges and Fields · Gauss's Law and Conductors

Which of the following statements are correct? A. Inside a conductor, the electrostatic field is zero. B. Electric field at the surface of a charged conductor does not depend on its surface charge density. C. The interior of a charged conductor can have no excess charge in the static situation. D. At the surface of a charged conductor, the electrostatic field must be normal to the surface at every point. E. The electrostatic potential is zero everywhere inside a charged conductor. Choose the correct answer from the options given below:

Constant potential is not zero potential

Inside a charged conductor the field is zero, so the potential is the same everywhere. That common value is usually not zero.

Next to a conductor the field is σ/ε₀

Just outside a conductor E=σε0E = \dfrac{\sigma}{\varepsilon_0}, twice the σ2ε0\dfrac{\sigma}{2\varepsilon_0} of an isolated plane sheet. The field does depend on the surface charge density.

The surface field has no sideways part

At the surface of a conductor at rest the field is normal to the surface. A sideways part would push charges along the surface, and they would not be at rest.

Shielding works only for an empty cavity

The field is zero in a cavity with no charge in it. Put a charge inside the cavity and there is a field in the cavity, from that charge and the charge it draws onto the wall.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (2)

  • Electric flux and Gauss's law

    Flux and Gauss's law

    ϕ=EAcos⁡θ,∮E⃗⋅dA⃗=qencε0\phi = EA\cos\theta, \qquad \oint \vec{E}\cdot d\vec{A} = \frac{q_{\text{enc}}}{\varepsilon_0}
  • Conductors in electrostatics

    Field of a conductor

    Einside=0,Esurface=σε0 (normal to the surface)E_{\text{inside}} = 0, \qquad E_{\text{surface}} = \frac{\sigma}{\varepsilon_0}\ \text{(normal to the surface)}

Watch out for (7)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper