PYQ Vault

NEET Physics · Electromagnetic Waves

Displacement Current and EM Waves

Displacement current in a charging capacitor, the electric and magnetic fields of a plane wave, the speed of light in vacuum and in a medium, and the energy and momentum a wave carries.

Why this matters

Eleven NEET questions from 2021 to 2026. Three are on displacement current (a capacitor on an ac source in 2021, the gap of a charging capacitor in 2024, the magnetic field it makes in 2025), three on the wave's fields (directions of E and B in 2021, B from E in 2023 and 2025), three on the speed in a medium (2022, Re-NEET 2024 and Re-NEET 2026) and two on energy and sources (a transmitter's energy in 2022, which property is false in 2024).

Concept 1 of 4: Displacement current

While a capacitor charges, current flows in the wires but no charge crosses the gap between the plates. Yet the electric field in the gap is growing. Maxwell saw that a changing electric field makes a magnetic field just as a current does, so he counted it as a current of its own: the displacement current. It closes the gap, so the current is the same all the way round the circuit.

Definition

  • Plain Ampere's law fails for a charging capacitor: a surface pierced by the wire sees a current, a surface through the gap sees none.
  • Maxwell added the displacement current id=ε0dΦEdti_d = \varepsilon_0 \dfrac{d\Phi_E}{dt}, where ΦE\Phi_E is the electric flux.
  • Ampere-Maxwell law: ∮B⃗⋅dl⃗=μ0(ic+ε0dΦEdt)\oint \vec{B} \cdot d\vec{l} = \mu_0 \left(i_c + \varepsilon_0 \dfrac{d\Phi_E}{dt}\right).
  • Between the plates ΦE=EA=qε0\Phi_E = EA = \dfrac{q}{\varepsilon_0}, so id=dqdt=CdVdti_d = \dfrac{dq}{dt} = C\dfrac{dV}{dt}: equal to the conduction current in the wires and in the same direction.
  • Inside a conductor only conduction current flows; in the gap only displacement current flows.
  • Between circular plates of radius R, the magnetic field is zero on the axis, grows in proportion to r up to the rim, and falls as 1/r outside, like the field of a thick wire.
  • A steady field gives no displacement current: once the capacitor is fully charged, id=0i_d = 0.

Displacement current

id=ε0dΦEdt=CdVdt,∮B⃗⋅dl⃗=μ0(ic+id)i_d = \varepsilon_0 \frac{d\Phi_E}{dt} = C\frac{dV}{dt}, \qquad \oint \vec{B} \cdot d\vec{l} = \mu_0 (i_c + i_d)
  • ΦE\Phi_Eelectric flux through the surface
  • ici_cconduction current
  • idi_ddisplacement current

Worked example

The voltage across a 2 µF capacitor rises steadily at 1000 V/s. Find the displacement current between its plates.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2024 · NEET (UG) 2024 — 05 May 2024 · Q36Moderate

Example 1 · Electromagnetic Waves · Displacement Current and EM Waves

A parallel plate capacitor is charged by connecting it to a battery through a resistor. If II is the current in the circuit, then in the gap between the plates:

No charge crosses the gap

Displacement current is not a flow of charge. It is a changing electric field, and it counts as a current only because it makes a magnetic field like one.

A steady field gives nothing

Displacement current needs the electric flux to change. Between the plates of a fully charged capacitor the field is steady, so id=0i_d = 0.

The field is zero on the axis

Between circular plates the magnetic field grows from zero at the centre to its largest value at the rim, then falls outside. It is not the same everywhere between the plates.

Concept 2 of 4: Electric and magnetic fields of a plane wave

In an electromagnetic wave an oscillating electric field and an oscillating magnetic field keep each other going. Both stand at right angles to each other and to the direction the wave moves, so the wave is transverse. They rise and fall together, and the electric field is always c times the magnetic field.

Definition

  • A plane wave along z: Ex=E0sin⁡(kz−ωt)E_x = E_0 \sin(kz - \omega t) and By=B0sin⁡(kz−ωt)B_y = B_0 \sin(kz - \omega t).
  • E, B and the direction of travel are all at right angles. The wave travels along E⃗×B⃗\vec{E} \times \vec{B}.
  • E and B are in phase: they peak together and pass through zero together.
  • Amplitudes: E0=cB0E_0 = cB_0, and at every instant E=cBE = cB.
  • Speed from the wave: c=ωk=fλc = \dfrac{\omega}{k} = f\lambda.
  • A wave with (kx−ωt)(kx - \omega t) travels along +x+x; a wave with (kx+ωt)(kx + \omega t) travels along −x-x.

Plane wave fields

E0=cB0,c=ωk=fλ,travel along E⃗×B⃗E_0 = cB_0, \qquad c = \frac{\omega}{k} = f\lambda, \qquad \text{travel along } \vec{E} \times \vec{B}
  • E0E_0amplitude of the electric field
  • B0B_0amplitude of the magnetic field
  • kkwave number, 2π divided by the wavelength

Diagram · the electric and magnetic fields of a plane wave

zE (along x)B (along y)both peak at the same zE₀ = 30 V/m, so B₀ = E₀/c = 30/(3 × 10⁸) = 10⁻⁷ Ttravel along E × B, at right angles to both fields

Drawn at one instant. E and B rise and fall together (in phase) and E = cB at every point, so the magnetic field is tiny: B is drawn far larger than to scale. The wave travels along E × B (E along x and B along y give travel along z); B × E would point the other way.

Worked example

The electric field of a plane wave in vacuum has an amplitude of 30 V/m. What is the amplitude of its magnetic field?
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2025 · NEET (UG) 2025 — 04 May 2025 · Q9Moderate

Example 2 · Electromagnetic Waves · Displacement Current and EM Waves

The electric field in a plane electromagnetic wave is given by Ez=60cos⁡(5x+1.5×109t)E_z = 60\cos(5x + 1.5 \times 10^9 t) V/m. Then expression for the corresponding magnetic field is (here subscripts denote the direction of the field):

Divide by c, do not multiply

B0=E0/cB_0 = E_0/c, so the magnetic field amplitude is tiny: 48 V/m gives 1.6×10−71.6 \times 10^{-7} T. Multiplying by c gives an absurd value.

B keeps the phase of E

If E is a cosine of (5x+ωt)(5x + \omega t), B is the same cosine of the same angle. Changing cos to sin or changing the angle is wrong.

The order of the cross product matters

The wave travels along E⃗×B⃗\vec{E} \times \vec{B}. Using B⃗×E⃗\vec{B} \times \vec{E} reverses the direction. If E and B are parallel, the cross product is zero and no wave travels.

A plus sign means travel along minus

A wave written with (kx+ωt)(kx + \omega t) moves along −x-x, so its B must make E⃗×B⃗\vec{E} \times \vec{B} point along −x-x.

Concept 3 of 4: Speed of electromagnetic waves in vacuum and in a medium

Maxwell found that the speed of his waves came out of two constants of electricity and magnetism, and the number matched the speed of light. So light is an electromagnetic wave. In a material the permittivity and permeability are larger, so the wave slows down. The source fixes the frequency, so a slower wave has a shorter wavelength.

Definition

  • In vacuum: c=1μ0ε0=3×108c = \dfrac{1}{\sqrt{\mu_0 \varepsilon_0}} = 3 \times 10^{8} m/s.
  • In a medium: v=1με=cμrεrv = \dfrac{1}{\sqrt{\mu \varepsilon}} = \dfrac{c}{\sqrt{\mu_r \varepsilon_r}}. For most media μr≈1\mu_r \approx 1.
  • So cv=μrεr\dfrac{c}{v} = \sqrt{\mu_r \varepsilon_r}, the refractive index of the medium.
  • The frequency does not change in a medium; the wavelength becomes λm=vf\lambda_m = \dfrac{v}{f}.
  • Field ratio in a medium: EB=v\dfrac{E}{B} = v. With H=BμH = \dfrac{B}{\mu}, EH=μv=με\dfrac{E}{H} = \mu v = \sqrt{\dfrac{\mu}{\varepsilon}}. In vacuum this is μ0/ε0=120π≈377 Ω\sqrt{\mu_0/\varepsilon_0} = 120\pi \approx 377\ \Omega.

Wave speed

c=1μ0ε0,v=cμrεr,EH=μεc = \frac{1}{\sqrt{\mu_0 \varepsilon_0}}, \qquad v = \frac{c}{\sqrt{\mu_r \varepsilon_r}}, \qquad \frac{E}{H} = \sqrt{\frac{\mu}{\varepsilon}}
  • εr\varepsilon_rrelative permittivity (dielectric constant)
  • μr\mu_rrelative permeability
  • HHmagnetic intensity, B divided by μ

Worked example

A non-magnetic medium has a dielectric constant of 4. Find the speed of light in it and its refractive index.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2024 · Re-NEET (UG) 2024 — 23 Jun 2024 · Q36Hard

Example 3 · Electromagnetic Waves · Displacement Current and EM Waves

If the ratio of relative permeability and relative permittivity of a uniform medium is 1 : 4. The ratio of the magnitudes of electric field intensity (E)(E) to the magnetic field intensity (H)(H) of an EM wave propagating in that medium is (Given that μ0ε0=120π)\left(\text{Given that } \sqrt{\dfrac{\mu_0}{\varepsilon_0}} = 120\pi\right):

The frequency stays the same

In a medium the speed and the wavelength both fall by the same factor. The frequency is set by the source and does not change.

Take the square root

v=c/μrεrv = c/\sqrt{\mu_r \varepsilon_r}. A dielectric constant of 9 slows light three times, not nine times.

E over B is a speed, E over H is in ohms

E/B=vE/B = v, in m/s. E/H=μ/εE/H = \sqrt{\mu/\varepsilon}, in ohms: about 377 Ω in vacuum, and smaller when εr\varepsilon_r is larger than μr\mu_r.

Concept 4 of 4: Sources, energy and momentum of electromagnetic waves

A charge at rest makes only an electric field, and a charge moving at a steady speed adds only a steady magnetic field. To send out a wave the charge must accelerate, as electrons do when they oscillate in an aerial. The wave then carries energy and momentum away from it, through empty space, with no medium needed.

Definition

  • Source: an accelerated charge radiates electromagnetic waves. A charge oscillating at frequency f radiates waves of the same frequency f.
  • Electromagnetic waves need no material medium: they travel through vacuum.
  • Energy density: uE=12ε0E2u_E = \tfrac{1}{2}\varepsilon_0 E^{2} and uB=B22μ0u_B = \dfrac{B^{2}}{2\mu_0}. Since B=E/cB = E/c, the two are equal, and the total is u=ε0E2u = \varepsilon_0 E^{2}.
  • Averaged over a cycle, E2E^{2} is half of E02E_0^{2}, so the average total energy density is 12ε0E02\tfrac{1}{2}\varepsilon_0 E_0^{2}.
  • Momentum: energy U fully absorbed by a surface delivers momentum p=Ucp = \dfrac{U}{c}. This push is called radiation pressure.
  • Energy sent out by a source of power P in time t: U=PtU = Pt.

Energy and momentum

uE=12ε0E2=uB=B22μ0,p=Ucu_E = \frac{1}{2}\varepsilon_0 E^{2} = u_B = \frac{B^{2}}{2\mu_0}, \qquad p = \frac{U}{c}
  • uEu_Eenergy per unit volume in the electric field
  • uBu_Benergy per unit volume in the magnetic field
  • ppmomentum delivered

Worked example

At some point in a wave in vacuum the electric field is 10 V/m. Find the electric, magnetic and total energy densities there. (ε0=8.85×10−12 C2 N−1m−2\varepsilon_0 = 8.85 \times 10^{-12}\ \text{C}^{2}\,\text{N}^{-1}\text{m}^{-2})
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2024 · NEET (UG) 2024 — 05 May 2024 · Q41Easy

Example 4 · Electromagnetic Waves · Displacement Current and EM Waves

The property which is not of an electromagnetic wave travelling in free space is that:

Steady motion does not radiate

Only an accelerated charge sends out electromagnetic waves. A charge moving at constant velocity makes a steady magnetic field and no wave.

The two shares are equal

In a wave the electric and magnetic energy densities are equal, so the total is ε0E2\varepsilon_0 E^{2}, twice the electric share.

Use watts and seconds

Energy is power times time in SI units. A 100 kW transmitter running for 1 hour sends out 105×3600=3.6×10810^{5} \times 3600 = 3.6 \times 10^{8} J.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (4)

  • Displacement current

    Displacement current

    id=ε0dΦEdt=CdVdt,∮B⃗⋅dl⃗=μ0(ic+id)i_d = \varepsilon_0 \frac{d\Phi_E}{dt} = C\frac{dV}{dt}, \qquad \oint \vec{B} \cdot d\vec{l} = \mu_0 (i_c + i_d)
  • Electric and magnetic fields of a plane wave

    Plane wave fields

    E0=cB0,c=ωk=fλ,travel along E⃗×B⃗E_0 = cB_0, \qquad c = \frac{\omega}{k} = f\lambda, \qquad \text{travel along } \vec{E} \times \vec{B}
  • Speed of electromagnetic waves in vacuum and in a medium

    Wave speed

    c=1μ0ε0,v=cμrεr,EH=μεc = \frac{1}{\sqrt{\mu_0 \varepsilon_0}}, \qquad v = \frac{c}{\sqrt{\mu_r \varepsilon_r}}, \qquad \frac{E}{H} = \sqrt{\frac{\mu}{\varepsilon}}
  • Sources, energy and momentum of electromagnetic waves

    Energy and momentum

    uE=12ε0E2=uB=B22μ0,p=Ucu_E = \frac{1}{2}\varepsilon_0 E^{2} = u_B = \frac{B^{2}}{2\mu_0}, \qquad p = \frac{U}{c}

Watch out for (13)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper