PYQ Vault

NEET Physics · Kinetic Theory

Ideal Gas Laws

The ideal gas equation PV = μRT, the laws of Boyle and Charles and how to read them off a graph, and Dalton's law for a mixture of gases.

Why this matters

Four NEET questions from 2022 to 2025, three of them from 2024 or later. Two use the ideal gas equation (the volume 4.5 kg of water would fill as a gas at STP in 2022, the oxygen taken out of a cylinder in 2025), one reads pressures off temperature and volume lines in 2024, and one finds the pressure when two chambers of gas are joined in 2025.

Concept 1 of 3: The ideal gas equation

Pressure, volume and temperature of a gas are tied together. Squeeze a gas into less room and it presses harder; heat it and it presses harder still. For a gas thin enough that its molecules hardly attract each other, all of this is one equation, PV = μRT. Knowing any three of P, V, T and the amount of gas gives the fourth.

Definition

  • PV=μRTPV = \mu RT, with μ\mu the number of moles: μ=massmolar mass=NNA\mu = \dfrac{\text{mass}}{\text{molar mass}} = \dfrac{N}{N_A}.
  • Per molecule: PV=NkBTPV = Nk_BT, where kB=RNA=1.38×10−23k_B = \dfrac{R}{N_A} = 1.38 \times 10^{-23} J/K is Boltzmann's constant.
  • T is always in kelvin: T=t+273T = t + 273. P is the absolute pressure: a gauge reads pressure above the atmosphere, so add 1 atm to a gauge reading.
  • At STP (273 K and 1 atm) one mole of any ideal gas fills 22.4 litres.
  • For a fixed amount of gas: P1V1T1=P2V2T2\dfrac{P_1V_1}{T_1} = \dfrac{P_2V_2}{T_2}.

Ideal gas equation

PV=μRT=NkBT,kB=RNA,P1V1T1=P2V2T2PV = \mu RT = Nk_BT, \qquad k_B = \frac{R}{N_A}, \qquad \frac{P_1V_1}{T_1} = \frac{P_2V_2}{T_2}
  • μ\munumber of moles
  • NNnumber of molecules
  • kBk_BBoltzmann's constant

Worked example

A 20 litre cylinder holds oxygen at 27 °C and an absolute pressure of 2.49×1052.49 \times 10^{5} Pa. Find the number of moles and the mass of oxygen in it. (R = 8.3 J/mol K, molar mass of oxygen 32 g/mol)
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2022 · NEET (UG) 2022 — 17 Jul 2022 · Q46Moderate

Example 1 · Kinetic Theory · Ideal Gas Laws

The volume occupied by the molecules contained in 4.5 kg water at STP, if the intermolecular forces vanish away is

Temperature goes in kelvin

Heating a gas from 20 °C to 40 °C does not double its pressure or volume. Change to kelvin first: 293 K to 313 K is a rise of under 7%.

A gauge reading is not the gas pressure

A gauge shows how far the pressure is above the atmosphere. In PV=μRTPV = \mu RT use the absolute pressure, the gauge reading plus 1 atm.

Concept 2 of 3: Boyle's and Charles's laws on a graph

Hold one of P, V and T fixed and the ideal gas equation turns into a simple law between the other two. Each law has a shape on a graph, and NEET likes to give the graph and ask which line is at the higher pressure or temperature. The trick is always the same: fix one quantity by drawing a line across the graph, then compare the other.

Definition

  • Boyle's law (fixed T and amount): PVPV is constant. On a P-V graph each temperature gives a curve, an isotherm; the curve farther from the axes is at the higher temperature.
  • Charles's law (fixed P and amount): V∝TV \propto T in kelvin. On a V-T graph this is a straight line through the origin with slope μRP\dfrac{\mu R}{P}, so a steeper line means a lower pressure.
  • At fixed V: P∝TP \propto T in kelvin.
  • To compare lines: at one temperature, the line with the larger volume is at the lower pressure.

Gas laws

PV=constant (T fixed),VT=μRP (P fixed),PT=constant (V fixed)PV = \text{constant}\ (T\ \text{fixed}), \qquad \frac{V}{T} = \frac{\mu R}{P}\ (P\ \text{fixed}), \qquad \frac{P}{T} = \text{constant}\ (V\ \text{fixed})

Visualization · Boyle's law: P × V stays the same

0100200300020406080100120volume V (cm³)pressure P (kPa)start: 60 cm³, 100 kPa24 cm³, 250 kPa
P = 250 kPaP × V = 6000 kPa·cm³

The syringe starts at 60 cm³ and 100 kPa. Pushed in to 24 cm³ (2.5 times smaller), its pressure rises 2.5 times, to 250 kPa. The shaded rectangle is P × V: as you move the slider its shape changes but its area stays 6000. The temperature is the same at every point on this curve.

Worked example

Two straight lines through the origin on a V-T graph are drawn for the same amount of one gas at two fixed pressures. Line 1 is twice as steep as line 2. Find P1/P2P_1/P_2.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2024 · NEET (UG) 2024 — 05 May 2024 · Q39Moderate

Example 2 · Kinetic Theory · Ideal Gas Laws

The following graph represents the TT-VV curves of an ideal gas (where TT is the temperature and VV the volume) at three pressures P1P_1, P2P_2 and P3P_3 compared with those of Charles's law represented as dotted lines. Then the correct relation is:

The steeper V-T line is at the lower pressure

The slope of a Charles's law line is μR/P\mu R/P, so a larger pressure gives a flatter line. At one temperature, more volume means less pressure.

Charles's law needs kelvin

V∝TV \propto T holds only with T in kelvin. Going from 27 °C to 54 °C raises the volume by 27/300, about 9%, not by double.

Concept 3 of 3: Mixtures of gases and Dalton's law

In a mixture of gases that do not react, each gas spreads through the whole vessel and pushes on the walls as if the others were not there. The pressure each gas would give alone is its partial pressure, and the total pressure is just their sum. The moles of the gases add too.

Definition

  • Dalton's law of partial pressures: P=P1+P2+…P = P_1 + P_2 + \dots for non-reacting ideal gases, each Pi=μiRTVP_i = \dfrac{\mu_iRT}{V} with V the whole volume.
  • A gas's share of the pressure is its share of the moles: Pi=μiμPP_i = \dfrac{\mu_i}{\mu}P.
  • Two gases at the same temperature, in volumes V1V_1 and V2V_2, joined into one vessel: each spreads into V1+V2V_1 + V_2 (Boyle) and the pressures add (Dalton), so P(V1+V2)=P1V1+P2V2P(V_1 + V_2) = P_1V_1 + P_2V_2.
  • The same result holds when two lots of one kind of gas mix in an insulated container with no work done: the total internal energy is kept, and for one kind of gas that energy is proportional to PV (the next page shows why).

Dalton's law

P=P1+P2,Pi=μiμP,P(V1+V2)=P1V1+P2V2P = P_1 + P_2, \qquad P_i = \frac{\mu_i}{\mu}P, \qquad P(V_1 + V_2) = P_1V_1 + P_2V_2

Worked example

A 10 litre vessel at 300 K holds 0.2 mol of nitrogen and 0.3 mol of oxygen. Find each partial pressure and the total pressure. (R = 8.3 J/mol K)
Practise this conceptself-check · 3 quick reps

The same idea in a real exam question:

NEET · 2025 · NEET (UG) 2025 — 04 May 2025 · Q29Easy

Example 3 · Kinetic Theory · Ideal Gas Laws

A container has two chambers of volumes V1=2V_1 = 2 litres and V2=3V_2 = 3 litres separated by a partition made of a thermal insulator. The chambers contain n1=5n_1 = 5 and n2=4n_2 = 4 moles of ideal gas at pressures p1=1p_1 = 1 atm and p2=2p_2 = 2 atm, respectively. When the partition is removed, the mixture attains an equilibrium pressure of

Pressures do not simply average

Joining 1 litre of gas at 3 atm to 3 litres at 1 atm, at one temperature, does not give 2 atm. Weight each pressure by its volume: 3×1+1×34=1.5\dfrac{3 \times 1 + 1 \times 3}{4} = 1.5 atm.

A partial pressure uses the whole volume

Each gas in a mixture fills the entire vessel, so its partial pressure is μiRT/V\mu_iRT/V with the total V, not some part of it.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (3)

  • The ideal gas equation

    Ideal gas equation

    PV=μRT=NkBT,kB=RNA,P1V1T1=P2V2T2PV = \mu RT = Nk_BT, \qquad k_B = \frac{R}{N_A}, \qquad \frac{P_1V_1}{T_1} = \frac{P_2V_2}{T_2}
  • Boyle's and Charles's laws on a graph

    Gas laws

    PV=constant (T fixed),VT=μRP (P fixed),PT=constant (V fixed)PV = \text{constant}\ (T\ \text{fixed}), \qquad \frac{V}{T} = \frac{\mu R}{P}\ (P\ \text{fixed}), \qquad \frac{P}{T} = \text{constant}\ (V\ \text{fixed})
  • Mixtures of gases and Dalton's law

    Dalton's law

    P=P1+P2,Pi=μiμP,P(V1+V2)=P1V1+P2V2P = P_1 + P_2, \qquad P_i = \frac{\mu_i}{\mu}P, \qquad P(V_1 + V_2) = P_1V_1 + P_2V_2

Watch out for (6)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper