PYQ Vault

NEET Physics · Motion in a Straight Line

Calculus and Motion Graphs

Velocity and acceleration as derivatives of position, a = v dv/dx when velocity is known against position, integrating back from acceleration, and the slopes and areas of position, velocity and acceleration graphs.

Why this matters

Four NEET questions, from 2022 to 2025. Two differentiate: the initial velocity and initial acceleration from a fourth-degree position equation in Re-NEET 2024, and the acceleration from t = x² + x in NEET 2025. Two read graphs: two position-time lines at 30° and 45° in 2022, and the acceleration-time graph that matches a velocity graph that rises, stays flat and falls in 2024.

Concept 1 of 3: Velocity and acceleration from position

Instantaneous velocity is how fast the position is changing at one moment, and acceleration is how fast the velocity is changing. So when the position is given as an equation in time, differentiate once to get the velocity and once more to get the acceleration. Going the other way, from acceleration back to velocity or position, you integrate and add the starting value.

Definition

  • v=dxdtv = \dfrac{dx}{dt} and a=dvdt=d2xdt2a = \dfrac{dv}{dt} = \dfrac{d^{2}x}{dt^{2}}.
  • Power rule: ddt(tn)=ntn−1\dfrac{d}{dt}(t^{n}) = nt^{n-1}. A constant term gives zero.
  • Initial means t=0t = 0, put in after differentiating.
  • Backwards: v=u+∫0ta dtv = u + \displaystyle\int_{0}^{t} a\,dt and x=x0+∫0tv dtx = x_0 + \displaystyle\int_{0}^{t} v\,dt.
  • If x is a quadratic in t, the acceleration is the same at every instant (uniform). A cubic or higher power gives an acceleration that changes with time.
  • Retardation: the acceleration is opposite to the velocity, so the body slows down.

Derivatives of position

v=dxdt,a=dvdt=d2xdt2,v=u+∫0ta dtv = \frac{dx}{dt}, \qquad a = \frac{dv}{dt} = \frac{d^{2}x}{dt^{2}}, \qquad v = u + \int_{0}^{t} a\,dt
  • uuvelocity at t = 0
  • x0x_0position at t = 0

Worked example

A particle moves as x=t3−6t2+9t+2x = t^{3} - 6t^{2} + 9t + 2 (x in metres, t in seconds). Find its velocity at the instant its acceleration is zero.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2024 · Re-NEET (UG) 2024 — 23 Jun 2024 · Q15Moderate

Example 1 · Motion in a Straight Line · Calculus and Motion Graphs

A particle is moving along xx-axis with its position (x)(x) varying with time (t)(t) as x=αt4+βt2+γt+δx = \alpha t^4 + \beta t^2 + \gamma t + \delta. The ratio of its initial velocity to its initial acceleration, respectively, is:

Differentiate first, then put in time zero

Putting t=0t = 0 into the position equation gives the starting position, not the initial velocity. Differentiate first, then put t=0t = 0.

Zero velocity is not zero acceleration

Where a body turns back its velocity is zero, but its acceleration usually is not. Find the turning point from v=0v = 0 and the instant of steady velocity from a=0a = 0.

Add the starting value when you integrate

Integrating the acceleration gives the change in velocity. Add the initial velocity u (and the starting position for x), or the answer is right only for a body starting from rest at the origin.

Concept 2 of 3: Acceleration when velocity is given against position

Sometimes the velocity is known at each position, not at each time. You cannot differentiate it with respect to time directly. The chain rule helps: the change of v with time is the change of v with position times how fast the position changes, which is v itself. So the acceleration is vdvdxv\dfrac{dv}{dx}.

Definition

  • a=dvdt=dvdx⋅dxdt=vdvdxa = \dfrac{dv}{dt} = \dfrac{dv}{dx}\cdot\dfrac{dx}{dt} = v\dfrac{dv}{dx}.
  • If v2v^{2} is given in terms of x: a=12d(v2)dxa = \dfrac{1}{2}\dfrac{d(v^{2})}{dx}.
  • If time is given in terms of position: v=dxdt=1dt/dxv = \dfrac{dx}{dt} = \dfrac{1}{dt/dx}, then use a=vdvdxa = v\dfrac{dv}{dx}.
  • A negative a while v is positive means the body is slowing down.

Acceleration from velocity against position

a=vdvdx=12d(v2)dx,v=1dt/dxa = v\frac{dv}{dx} = \frac{1}{2}\frac{d(v^{2})}{dx}, \qquad v = \frac{1}{dt/dx}

Worked example

The velocity of a particle depends on its position as v=2xv = 2\sqrt{x} (v in m/s, x in m). Find its acceleration.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2025 · NEET (UG) 2025 — 04 May 2025 · Q15Moderate

Example 2 · Motion in a Straight Line · Calculus and Motion Graphs

In some appropriate units, time (tt) and position (xx) relation of a moving particle is given by t=x2+xt = x^2 + x. The acceleration of the particle is

The change of v with x is not the acceleration

dvdx\dfrac{dv}{dx} has the unit s−1\text{s}^{-1}, not m/s2\text{m/s}^{2}. Multiply it by v to get the acceleration.

Invert when time is given against position

When time is given in terms of position, differentiating gives dtdx\dfrac{dt}{dx}. The velocity is its reciprocal, v=1dt/dxv = \dfrac{1}{dt/dx}, not dtdx\dfrac{dt}{dx} itself.

Concept 3 of 3: Slopes and areas of motion graphs

Every motion graph hides two readings. The slope of a graph tells you the rate of change of what is plotted: the slope of position against time is the velocity, and the slope of velocity against time is the acceleration. The area under a graph adds things up over time: the area under velocity-time is the displacement, and the area under acceleration-time is the change in velocity.

Definition

  • Position-time graph: slope = velocity. A straight line at angle θ to the time axis has v=tan⁡θv = \tan\theta (equal scales on both axes).
  • Velocity-time graph: slope = acceleration; area = displacement, with area below the time axis counted negative. For the distance, add all the areas as positive.
  • Acceleration-time graph: area = change in velocity.
  • Uniform velocity: straight sloping position-time line, flat velocity-time line, zero acceleration.
  • Uniform acceleration: position-time graph a parabola, velocity-time graph a straight sloping line, acceleration-time graph a flat line.
  • A velocity-time graph that rises in a straight line, stays flat, then falls in a straight line has an acceleration-time graph of a positive step, then zero, then a negative step.

Slopes and areas

v=dxdt (slope),Δx=∫v dt (area),Δv=∫a dt (area)v = \frac{dx}{dt}\ \text{(slope)}, \qquad \Delta x = \int v\,dt\ \text{(area)}, \qquad \Delta v = \int a\,dt\ \text{(area)}
time tvarea = displacementuslope = a

On a velocity-time graph the slope of the line is the acceleration, and the area under the line is the displacement.

Worked example

A car starts from rest, speeds up uniformly to 20 m/s in 10 s, runs at 20 m/s for 20 s, then stops uniformly in 5 s. Use its velocity-time graph to find the distance covered and the acceleration in each part.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2022 · NEET (UG) 2022 — 17 Jul 2022 · Q33Easy

Example 3 · Motion in a Straight Line · Calculus and Motion Graphs

The displacement-time graphs of two moving particles make angles of 30° and 45° with the xx-axis as shown in the figure. The ratio of their respective velocity is

Area gives displacement, not distance

Area under the velocity-time graph below the time axis is negative displacement. For the distance, take every area as positive and add.

Read the slope, not the height

A high point on a position-time graph means the body is far away, not that it is fast. Its velocity is the slope of the graph at that point.

A straight sloping velocity line is not uniform velocity

A straight sloping velocity-time line means uniform acceleration. Uniform velocity is a flat velocity-time line, or a straight sloping position-time line.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (3)

  • Velocity and acceleration from position

    Derivatives of position

    v=dxdt,a=dvdt=d2xdt2,v=u+∫0ta dtv = \frac{dx}{dt}, \qquad a = \frac{dv}{dt} = \frac{d^{2}x}{dt^{2}}, \qquad v = u + \int_{0}^{t} a\,dt
  • Acceleration when velocity is given against position

    Acceleration from velocity against position

    a=vdvdx=12d(v2)dx,v=1dt/dxa = v\frac{dv}{dx} = \frac{1}{2}\frac{d(v^{2})}{dx}, \qquad v = \frac{1}{dt/dx}
  • Slopes and areas of motion graphs

    Slopes and areas

    v=dxdt (slope),Δx=∫v dt (area),Δv=∫a dt (area)v = \frac{dx}{dt}\ \text{(slope)}, \qquad \Delta x = \int v\,dt\ \text{(area)}, \qquad \Delta v = \int a\,dt\ \text{(area)}

Watch out for (8)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper