PYQ Vault

NEET Physics · Moving Charges and Magnetism

Magnetic Moment and the Galvanometer

The magnetic moment m = NIA of a current loop, the torque it feels in a field, and how a moving coil galvanometer works and is turned into an ammeter or a voltmeter.

Why this matters

Four NEET questions from 2021 to 2026. Three ask for magnetic moments: one wire wound as a triangle and as a square (2021), two coils with radii in the ratio 1 : 2 (2025) and a coil whose current is found from its centre field (2026). One finds the shunt that turns a galvanometer into a 10 A ammeter (2026).

Concept 1 of 2: Magnetic moment of a current loop and the torque on it

A loop of current behaves like a small bar magnet. How strong a magnet it is depends on the current, the area it wraps round and the number of turns: that product is its magnetic moment. In a uniform field the loop feels no net force, only a turning effect that tries to line its moment up with the field.

Definition

  • Magnetic moment: m⃗=NIA⃗\vec{m} = NI\vec{A}, of size m=NIAm = NIA. Its direction is along the normal to the loop, given by the right-hand rule. Unit: A m².
  • Torque in a uniform field: τ⃗=m⃗×B⃗\vec{\tau} = \vec{m} \times \vec{B}, of size τ=mBsin⁡θ\tau = mB\sin\theta, where θ\theta is the angle between m⃗\vec{m} (the normal) and B⃗\vec{B}.
  • The net force on a current loop in a uniform field is zero.
  • A wire of fixed length L wound into a shape of perimeter p makes N=LpN = \dfrac{L}{p} turns.
  • Areas: circle πr2\pi r^{2}, square a2a^{2}, equilateral triangle 34a2\dfrac{\sqrt{3}}{4}a^{2}.

Magnetic moment and torque

m=NIA,τ⃗=m⃗×B⃗,τ=mBsin⁡θm = NIA, \qquad \vec{\tau} = \vec{m} \times \vec{B}, \qquad \tau = mB\sin\theta
  • NNnumber of turns
  • AAarea of one turn
  • θ\thetaangle between the moment (the normal to the loop) and the field

Worked example

A circular coil of 50 turns and radius 4 cm carries 0.5 A. Find its magnetic moment, and the torque on it when its moment makes 30° with a 0.2 T field.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2021 · NEET (UG) 2021 — 12 Sep 2021 · Q46Hard

Example 1 · Moving Charges and Magnetism · Magnetic Moment and the Galvanometer

A uniform conducting wire of length 12a12a and resistance RR is wound up as a current carrying coil in the shape of, (i) an equilateral triangle of side aa. (ii) a square of side aa. The magnetic dipole moments of the coil in each case respectively are

Measure θ from the normal, not the plane

In τ=mBsin⁡θ\tau = mB\sin\theta, θ\theta is the angle between the field and the normal to the loop. A loop whose plane is parallel to the field has θ=90∘\theta = 90^{\circ} and the largest torque.

The same wire makes more turns of a smaller shape

Winding a fixed length of wire into a smaller shape gives more turns, so N changes along with A. Work out N=LpN = \dfrac{L}{p} before using m=NIAm = NIA.

Moment goes as the area

For the same current and turns, the moment of a circular coil goes as r2r^{2}. Radii in the ratio 1 : 3 give moments in the ratio 1 : 9.

Concept 2 of 2: Moving coil galvanometer, ammeter and voltmeter

A galvanometer is a coil hung in a magnetic field. A current makes the coil turn until a spring's twist balances the magnetic torque, so the turn tells you the current. It is very sensitive: a few milliamperes give a full swing. To measure larger currents you send most of the current round it through a small resistance; to measure voltages you put a large resistance in series with it.

Definition

  • The magnetic torque NIABNIAB is balanced by the spring's torque kϕk\phi: ϕ=NABk I\phi = \dfrac{NAB}{k}\,I. A radial field (from a soft iron core and curved pole pieces) keeps the torque at NIABNIAB for every deflection.
  • Current sensitivity ϕI=NABk\dfrac{\phi}{I} = \dfrac{NAB}{k}. Voltage sensitivity ϕV=NABkG\dfrac{\phi}{V} = \dfrac{NAB}{kG}, where G is the coil's resistance.
  • Doubling the turns doubles the current sensitivity but also doubles G, so the voltage sensitivity stays the same.
  • Ammeter: a small shunt S in parallel: S=IgGI−IgS = \dfrac{I_g G}{I - I_g}. An ammeter has a low resistance and goes in series.
  • Voltmeter: a large resistance R in series: R=VIg−GR = \dfrac{V}{I_g} - G. A voltmeter has a high resistance and goes in parallel.

Galvanometer conversions

ϕ=NABk I,S=IgGI−Ig,R=VIg−G\phi = \frac{NAB}{k}\,I, \qquad S = \frac{I_g G}{I - I_g}, \qquad R = \frac{V}{I_g} - G
  • IgI_gcurrent for full-scale deflection
  • GGresistance of the galvanometer coil
  • kktorsion constant of the spring

Worked example

A galvanometer of resistance 50 Ω gives full-scale deflection at 2 mA. What resistance, and connected how, turns it into a voltmeter reading up to 10 V?
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2026 · NEET (UG) 2026 — 03 May 2026 · Q36Moderate

Example 2 · Moving Charges and Magnetism · Magnetic Moment and the Galvanometer

A galvanometer of resistance 100 Ω100\,\Omega gives full scale deflection for a current of 1 mA. It is converted into an ammeter of range 0 – 10 A. The shunt required is:

The shunt carries I minus the galvanometer current

The shunt and the galvanometer share the same voltage: IgG=(I−Ig)SI_g G = (I - I_g)S. When IgI_g is tiny, I−Ig≈II - I_g \approx I.

Subtract G for a voltmeter

The series resistance is VIg−G\dfrac{V}{I_g} - G, not VIg\dfrac{V}{I_g}: the galvanometer's own resistance is part of the voltmeter.

More turns, same voltage sensitivity

Adding turns raises the current sensitivity, but the coil's resistance rises in the same ratio, so the voltage sensitivity does not change.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (2)

Watch out for (6)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper