PYQ Vault

NEET Physics · Ray Optics and Optical Instruments

Lenses

Refraction at a curved surface, the thin lens formula and the ray rules, the lens maker's formula and power in dioptres, and lenses used together, in contact or apart.

Why this matters

Nine NEET questions from 2021 to 2026, more than any other page. Four combine lenses: two put lenses in contact (two lenses in 2023, four in 2025), one uses a gap that keeps a beam parallel (2021) and one a gap that forms an image (Re-NEET 2026). Two use the lens maker's formula (a biconvex lens's power in 2022, three thin layers cemented together in 2023). One sends light back through a lens from a plane mirror (2021), one asks where a concave lens sends a ray parallel to the axis (2026) and one asks which experiment needs an index correction (Re-NEET 2026).

Concept 1 of 3: Thin lens formula and ray rules

A lens is two curved refracting surfaces close together. A convex lens is thicker in the middle and brings parallel rays together at its focus. A concave lens is thinner in the middle and spreads them out, as if they came from a focus on the near side. The thin lens formula links where the object is, where the image is and the focal length, with the same sign rule as mirrors.

Definition

  • Refraction at one curved surface, from index n1n_1 into n2n_2: n2v−n1u=n2−n1R\dfrac{n_2}{v} - \dfrac{n_1}{u} = \dfrac{n_2 - n_1}{R}.
  • Thin lens formula: 1v−1u=1f\dfrac{1}{v} - \dfrac{1}{u} = \dfrac{1}{f}, with distances from the optical centre, positive along the incoming light. Magnification m=vum = \dfrac{v}{u}. A convex lens has positive f, a concave lens negative f.
  • Ray rules: a ray parallel to the axis passes through the second principal focus after a convex lens, or appears to diverge from the first principal focus after a concave lens. A ray through the optical centre goes on undeviated. A ray through (or heading for) the first focus comes out parallel to the axis.
  • A concave lens always gives a virtual, erect, smaller image of a real object.
  • A lens with a plane mirror behind it: the light crosses the lens, is reflected, and crosses the lens again. Each image is the object for the next step.
  • On an optical bench, u and v are read off the bench scale. The index correction, found with a rod of known length, is applied to these readings when finding a lens's focal length.

Thin lens formula

1v−1u=1f,m=vu,n2v−n1u=n2−n1R\frac{1}{v} - \frac{1}{u} = \frac{1}{f}, \qquad m = \frac{v}{u}, \qquad \frac{n_2}{v} - \frac{n_1}{u} = \frac{n_2 - n_1}{R}
  • uuobject distance from the optical centre
  • vvimage distance from the optical centre
  • fffocal length, positive for a convex lens
F2FF'2F'OobjectimageObject beyond 2F: real, inverted, diminished image between F′ and 2F′

A convex lens converges light. The parallel ray bends through the far focus; the ray through the optic centre goes straight. Where they cross is the image.

Worked example

An object is 15 cm from a convex lens of focal length 10 cm. Where is the image, and what is the magnification?
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2021 · NEET (UG) 2021 — 12 Sep 2021 · Q37Hard

Example 1 · Ray Optics and Optical Instruments · Lenses

A point object is placed at a distance of 60 cm from a convex lens of focal length 30 cm. If a plane mirror were put perpendicular to the principal axis of the lens and at a distance of 40 cm from it, the final image would be formed at a distance of

A concave lens has a negative focal length

Using f=+20f = +20 cm for a concave lens gives a real image where the lens actually forms a virtual one. Put the sign in before solving.

Lens and mirror formulas differ in sign

For a lens 1v−1u=1f\dfrac{1}{v} - \dfrac{1}{u} = \dfrac{1}{f} and m=vum = \dfrac{v}{u}. For a mirror 1v+1u=1f\dfrac{1}{v} + \dfrac{1}{u} = \dfrac{1}{f} and m=−vum = -\dfrac{v}{u}.

Light reflected back crosses the lens again

With a plane mirror behind a lens, the image made by the mirror becomes a new object for the lens, with the light now travelling the other way. The final image comes from this second pass.

Concept 2 of 3: Lens maker's formula and power

How strongly a lens bends light depends on two things: how curved its faces are and how much its glass differs from the medium around it. The lens maker's formula puts both together. Power is the reverse of focal length: a strong lens has a short focal length and a large power.

Definition

  • Lens maker's formula: 1f=(n21−1)(1R1−1R2)\dfrac{1}{f} = (n_{21} - 1)\left(\dfrac{1}{R_1} - \dfrac{1}{R_2}\right), where n21n_{21} is the lens's index relative to the medium around it, R1R_1 is the first face the light meets and R2R_2 the second.
  • Radii follow the sign rule: for a biconvex lens R1R_1 is positive and R2R_2 negative, so the bracket adds up. A plane face has R=∞R = \infty.
  • An equiconvex lens of radius R and n = 1.5 has f=Rf = R.
  • Power P=1fP = \dfrac{1}{f} with f in metres; the unit is the dioptre (D). A convex lens has positive power, a concave lens negative.
  • In a liquid, use n21=nlensnliquidn_{21} = \dfrac{n_{\text{lens}}}{n_{\text{liquid}}}. The focal length grows; in a liquid of the same index the lens has no effect; in a denser liquid a convex lens spreads light out.
  • Thin layers cemented together act as thin lenses in contact: find each layer's power and add.

Lens maker's formula

1f=(n21−1)(1R1−1R2),P=1f (m)\frac{1}{f} = (n_{21} - 1)\left(\frac{1}{R_1} - \frac{1}{R_2}\right), \qquad P = \frac{1}{f\,(\text{m})}
  • n21n_{21}index of the lens relative to the surrounding medium
  • R1R_1radius of the first face met by the light
  • R2R_2radius of the second face

Worked example

A plano-convex lens has a curved face of radius 30 cm and is made of glass of refractive index 1.5. Find its focal length and power.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2022 · NEET (UG) 2022 — 17 Jul 2022 · Q5Easy

Example 2 · Ray Optics and Optical Instruments · Lenses

A biconvex lens has radii of curvature, 20 cm each. If the refractive index of the material of the lens is 1.5, the power of the lens is

Power needs the focal length in metres

P=1fP = \dfrac{1}{f} with f in metres. A lens of focal length 20 cm has power 10.2=5\dfrac{1}{0.2} = 5 D, not 0.05 D.

Keep the signs of the radii

For a biconvex lens R2R_2 is negative, so 1R1−1R2\dfrac{1}{R_1} - \dfrac{1}{R_2} becomes a sum. Dropping that sign makes an equiconvex lens look as if it had no power.

In a liquid, use the relative index

In water or oil, the lens maker's formula takes nlensnliquid\dfrac{n_{\text{lens}}}{n_{\text{liquid}}}, not the lens's own index. That is why a lens is weaker in water.

Concept 3 of 3: Combinations of lenses

Thin lenses placed in contact act like one lens whose power is the sum of their powers. If the lenses are apart, work step by step: let the first lens form its image, and use that image as the object for the next lens. The total magnification is the product of the separate magnifications.

Definition

  • Thin lenses in contact: 1F=1f1+1f2+…\dfrac{1}{F} = \dfrac{1}{f_1} + \dfrac{1}{f_2} + \dots, so P=P1+P2+…P = P_1 + P_2 + \dots
  • Magnification of a combination: m=m1m2m3…m = m_1 m_2 m_3 \dots
  • Lenses apart: apply the lens formula lens by lens. If the rays from the first lens are still converging when they reach the second, the first image is a virtual object for the second, with positive u.
  • A parallel beam that comes out parallel: two convex lenses must be f1+f2f_1 + f_2 apart; a convex lens followed by a concave lens, f1−∣f2∣f_1 - |f_2| apart.

Lenses in contact

1F=1f1+1f2+…,P=P1+P2+…,m=m1m2…\frac{1}{F} = \frac{1}{f_1} + \frac{1}{f_2} + \dots, \qquad P = P_1 + P_2 + \dots, \qquad m = m_1 m_2 \dots

Worked example

An object is 30 cm in front of a convex lens of focal length 20 cm. A second convex lens of focal length 20 cm is 40 cm behind the first. Where is the final image, and what is the total magnification?
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2023 · NEET (UG) 2023 — 07 May 2023 · Q36Easy

Example 3 · Ray Optics and Optical Instruments · Lenses

Two thin lenses are of same focal lengths (ff), but one is convex and the other one is concave. When they are placed in contact with each other, the equivalent focal length of the combination will be

Add powers, not focal lengths

Lenses of 20 cm and 30 cm in contact give 1F=120+130\dfrac{1}{F} = \dfrac{1}{20} + \dfrac{1}{30}, so F = 12 cm, not 50 cm.

Lenses apart need the lens formula twice

The rule P=P1+P2P = P_1 + P_2 is only for thin lenses in contact. With a gap, trace the image through each lens in turn; an image beyond the second lens is a virtual object with positive u.

Magnifications multiply

The magnification of a lens combination is m1m2m_1 m_2, not m1+m2m_1 + m_2, even though the powers of lenses in contact add.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (3)

  • Thin lens formula and ray rules

    Thin lens formula

    1v−1u=1f,m=vu,n2v−n1u=n2−n1R\frac{1}{v} - \frac{1}{u} = \frac{1}{f}, \qquad m = \frac{v}{u}, \qquad \frac{n_2}{v} - \frac{n_1}{u} = \frac{n_2 - n_1}{R}
  • Lens maker's formula and power

    Lens maker's formula

    1f=(n21−1)(1R1−1R2),P=1f (m)\frac{1}{f} = (n_{21} - 1)\left(\frac{1}{R_1} - \frac{1}{R_2}\right), \qquad P = \frac{1}{f\,(\text{m})}
  • Combinations of lenses

    Lenses in contact

    1F=1f1+1f2+…,P=P1+P2+…,m=m1m2…\frac{1}{F} = \frac{1}{f_1} + \frac{1}{f_2} + \dots, \qquad P = P_1 + P_2 + \dots, \qquad m = m_1 m_2 \dots

Watch out for (9)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper