PYQ Vault

NEET Physics · Waves

Travelling Waves and Wave Speed

The equation y = a sin(kx − ωt) of a travelling wave, how to read its wavelength, frequency, speed and the phase difference between two points from it, and what sets the speed of a wave on a string and of sound in a gas.

Why this matters

Three NEET questions, from 2022, Re-NEET 2024 and NEET 2026. Two read a wave equation: the frequency of a wave written as y = C sin(2π/λ)(at − x) (Re-NEET 2024), and the phase difference between two points 0.5 m apart on a wave written in centimetres (NEET 2026). One asks how the speed of a wave on a string changes when the tension is doubled (2022).

Concept 1 of 2: The equation of a travelling wave

As a wave passes along a string, every point on it moves up and down in simple harmonic motion, but each point is a little behind the one before it. The wave equation says both things at once: the term in t tells how fast each point oscillates, and the term in x tells how far along the string you must go for the motion to repeat. The speed of the wave is the ratio of the two. Two points a distance apart are out of step by a phase that grows with that distance.

Definition

  • A wave travelling along +x: y=asin⁡(kx−ωt)y = a\sin(kx - \omega t), or equally y=asin⁡(ωt−kx)y = a\sin(\omega t - kx). When the x and t terms have the same sign, y=asin⁡(kx+ωt)y = a\sin(kx + \omega t), the wave travels along −x-x.
  • Angular wave number k=2πλk = \dfrac{2\pi}{\lambda}; angular frequency ω=2πf=2πT\omega = 2\pi f = \dfrac{2\pi}{T}.
  • Wave speed: v=ωk=fλv = \dfrac{\omega}{k} = f\lambda.
  • Phase difference between two points a distance Δx\Delta x apart: Δϕ=kΔx=2πλΔx\Delta\phi = k\Delta x = \dfrac{2\pi}{\lambda}\Delta x. Use the same unit of length for k and Δx\Delta x.
  • A wave written as y=asin⁡2π(ft−xλ)y = a\sin 2\pi\left(ft - \dfrac{x}{\lambda}\right) has f before t and 1λ\dfrac{1}{\lambda} before x inside the bracket.

Travelling wave

y=asin⁡(kx−ωt),k=2πλ,ω=2πf,v=ωk=fλ,Δϕ=k Δxy = a\sin(kx - \omega t), \qquad k = \frac{2\pi}{\lambda}, \qquad \omega = 2\pi f, \qquad v = \frac{\omega}{k} = f\lambda, \qquad \Delta\phi = k\,\Delta x
  • kkangular wave number, in rad per unit length
  • ω\omegaangular frequency, in rad/s
  • Δϕ\Delta\phiphase difference between two points

Worked example

A wave is given by y=0.03sin⁡(200πt−0.5πx)y = 0.03\sin(200\pi t - 0.5\pi x), with x and y in metres and t in seconds. Find its wavelength, frequency, speed and direction of travel.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2026 · NEET (UG) 2026 — 03 May 2026 · Q21Moderate

Example 1 · Waves · Travelling Waves and Wave Speed

For a travelling harmonic wave y(x,t)=2.0cos⁡2π(10t−0.0080x+0.35)y(x, t) = 2.0\cos 2\pi(10t - 0.0080x + 0.35), where xx and yy are in cm and tt in s. The phase difference between oscillatory motion of two points separated by a distance of 0.5 m is:

Match the units before finding a phase difference

When x is in centimetres, k is in radians per centimetre. Turn the distance into centimetres too before using Δϕ=kΔx\Delta\phi = k\Delta x; mixing metres and centimetres puts the answer out by a factor of 100.

The signs decide the direction

Opposite signs on the x and t terms mean the wave moves along +x; the same sign means it moves along −x-x.

The number before t may be f, not ω

In y=asin⁡2π(ft−x/λ)y = a\sin 2\pi(ft - x/\lambda) the 2π is taken outside, so the number before t is the frequency itself. Multiply by 2π only when you want ω\omega.

Concept 2 of 2: Wave speed on a string and in a gas

How fast a wave runs depends on the medium, not on the source. On a string, a tighter string pulls each bit back faster, so the wave is quicker, while a heavier string is slower to move. Sound in a gas travels faster when the gas is hotter. The source sets only the frequency, and the frequency stays the same when the wave passes into a new medium; the wavelength changes to fit the new speed.

Definition

  • Transverse wave on a stretched string: v=Tμv = \sqrt{\dfrac{T}{\mu}}, where T is the tension and μ\mu the mass per unit length, μ=mL\mu = \dfrac{m}{L}.
  • For a wire of one material, μ\mu goes as the square of the diameter.
  • Sound in a fluid: v=Bρv = \sqrt{\dfrac{B}{\rho}}, with B the bulk modulus and ρ\rho the density.
  • In a gas, Newton took the compressions as isothermal and got v=P/ρv = \sqrt{P/\rho}, which is too small. Laplace's correction (adiabatic): v=γPρv = \sqrt{\dfrac{\gamma P}{\rho}}.
  • For an ideal gas, v=γRTMv = \sqrt{\dfrac{\gamma RT}{M}}, so v∝Tv \propto \sqrt{T} with T in kelvin.
  • The frequency is fixed by the source; in a new medium vv and λ\lambda change together, v=fλv = f\lambda.

Wave speed

vstring=Tμ,vgas=γPρ=γRTMv_{string} = \sqrt{\frac{T}{\mu}}, \qquad v_{gas} = \sqrt{\frac{\gamma P}{\rho}} = \sqrt{\frac{\gamma RT}{M}}
  • TTtension in the string (in the gas formula, the temperature in kelvin)
  • μ\mumass per unit length of the string
  • γ\gammaratio of the specific heats of the gas

Worked example

Two wires of the same metal are under the same tension. One has twice the diameter of the other. Find the ratio of the wave speeds, thick wire to thin wire.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2022 · NEET (UG) 2022 — 17 Jul 2022 · Q11Easy

Example 2 · Waves · Travelling Waves and Wave Speed

If the initial tension on a stretched string is doubled, then the ratio of the initial and final speeds of a transverse wave along the string is

Speed goes as the square root of tension

Doubling the tension on a string multiplies the wave speed by 2\sqrt{2}, not by 2. To double the speed, the tension must be made four times.

Frequency does not set the speed

Raising the frequency of a source does not make its wave faster; the medium fixes the speed, so the wavelength gets shorter instead.

Use kelvin for the speed of sound

The speed of sound in a gas goes as T\sqrt{T} with T in kelvin. Going from 27 °C to 54 °C does not multiply it by 2\sqrt{2}.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (2)

  • The equation of a travelling wave

    Travelling wave

    y=asin⁡(kx−ωt),k=2πλ,ω=2πf,v=ωk=fλ,Δϕ=k Δxy = a\sin(kx - \omega t), \qquad k = \frac{2\pi}{\lambda}, \qquad \omega = 2\pi f, \qquad v = \frac{\omega}{k} = f\lambda, \qquad \Delta\phi = k\,\Delta x
  • Wave speed on a string and in a gas

    Wave speed

    vstring=Tμ,vgas=γPρ=γRTMv_{string} = \sqrt{\frac{T}{\mu}}, \qquad v_{gas} = \sqrt{\frac{\gamma P}{\rho}} = \sqrt{\frac{\gamma RT}{M}}

Watch out for (6)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper