NEET Zoology · Biomolecules
Enzymes
What enzymes are and how they speed up reactions, the steps of the catalytic cycle, what temperature, pH, substrate and inhibitors do to them, the six enzyme classes, and the three kinds of cofactor.
Why this matters
Twelve NEET questions from 2023 to 2026, the largest share of the chapter. The enzyme classes were asked four times (Re-NEET 2024 twice, NEET 2025 and NEET 2026), with lyases in two of them. Cofactors were asked three times, and the inhibition of succinic dehydrogenase by malonate twice (NEET 2023 and NEET 2024).
Concept 1 of 4: What enzymes are and how they act
Definition
What an enzyme is:
- Almost all enzymes are proteins. Some nucleic acids behave like enzymes: these are ribozymes.
- Like any protein, an enzyme has primary, secondary and tertiary structure. In the tertiary structure the chain criss-crosses itself and makes crevices or pockets. One such pocket is the active site, into which the substrate fits.
- Inorganic catalysts work well at high temperature and pressure; enzymes get damaged at high temperature (say above 40°C). Enzymes from organisms living in hot vents and sulphur springs stay active up to 80 to 90°C (thermal stability of enzymes from thermophiles).
Why enzyme reactions are fast:
- The rate of a reaction is the amount of product formed per unit time. Without a catalyst, the rate doubles or halves for every 10°C change in temperature.
- Example: . Without an enzyme about 200 molecules of carbonic acid form in an hour. With carbonic anhydrase, about 600,000 molecules form every second: the enzyme speeds the reaction about 10 million times.
- A metabolic pathway is a chain of enzyme reactions. Glucose becomes pyruvic acid through ten enzyme-catalysed reactions: . Under anaerobic conditions skeletal muscle makes lactic acid, and yeast during fermentation makes ethanol.
- To become product, the substrate must pass through a high-energy transition state. The energy needed is the activation energy, and enzymes lower this activation energy barrier.
The nature of enzyme action:
- The enzyme (E) binds its substrate (S) to form a highly reactive, short-lived enzyme-substrate complex (ES), which passes through an enzyme-product complex (EP) and releases the product (P) and the unchanged enzyme: .
Animation · how an enzyme acts
- Binding: The substrate binds to the active site of the enzyme, fitting into it.
- Fitting tighter: Binding makes the enzyme change shape and fit more tightly around the substrate: the enzyme-substrate complex (ES).
- Bond breaking: The active site breaks the chemical bonds of the substrate, and the enzyme-product complex (EP) forms.
- Release: The enzyme releases the products. The free enzyme is unchanged and ready to bind another substrate molecule.
The enzyme comes out unchanged, ready for the next substrate.
| Step of the catalytic cycle | What happens |
|---|---|
| 1. Binding | The substrate binds to the active site of the enzyme, fitting into it |
| 2. Fitting tighter | Binding makes the enzyme change shape and fit more tightly around the substrate (the ES complex) |
| 3. Bond breaking | The active site breaks the chemical bonds of the substrate, and the enzyme-product complex forms |
| 4. Release | The enzyme releases the products, and the free enzyme is ready to bind another substrate molecule |
Practise this conceptself-check · 6 quick reps
The same idea in a real exam question:
Example 1 · Biomolecules · Enzymes
Not every enzyme is a protein
Enzymes, unlike inorganic catalysts, fail at high temperature
Bonds break before the products leave
Concept 2 of 4: Factors that affect enzyme activity, and inhibition
Definition
- Enzyme activity changes with temperature, pH, substrate concentration and the binding of specific chemicals.
- Temperature and pH: enzymes work in a narrow range. Each shows its highest activity at an optimum temperature and an optimum pH, and activity falls both below and above the optimum.
- Low temperature keeps the enzyme in a temporarily inactive state. High temperature destroys enzyme activity, because proteins are denatured by heat.
- Substrate concentration: as substrate rises, the velocity of the reaction rises at first and then reaches a maximum velocity (Vmax) that no further substrate can raise. The reason: the enzyme molecules are fewer than the substrate molecules, and once they are all saturated there is no free enzyme for the extra substrate.
- Inhibition: when a chemical binds the enzyme and shuts off its activity, the process is inhibition and the chemical is an inhibitor.
- A competitive inhibitor closely resembles the substrate in molecular structure, so it competes with the substrate for the substrate-binding site. The substrate cannot bind, and enzyme action falls.
- Example: malonate inhibits succinic dehydrogenase, because malonate closely resembles the substrate succinate. Competitive inhibitors are often used in the control of bacterial pathogens.
| Factor | Effect on the enzyme |
|---|---|
| Low temperature | Temporarily inactive; activity returns when warmedQ NEET 2023: both statements were true: low temperature preserves the enzyme, heat denatures it, and a competitive inhibitor resembles the substrate. |
| High temperature | Activity destroyed, because the protein is denatured by heat |
| pH | Highest activity at the optimum pH; falls on either side |
| Rising substrate concentration | Velocity rises, then levels off at Vmax once every enzyme molecule is saturated |
| Competitive inhibitor | Looks like the substrate and takes the substrate-binding site, so activity falls |
Practise this conceptself-check · 5 quick reps
The same idea in a real exam question:
Example 2 · Biomolecules · Enzymes
Cold does not destroy an enzyme
More substrate does not help past Vmax
Competitive inhibitors look like the substrate
Concept 3 of 4: The six classes of enzymes
Definition
- Enzymes are divided into 6 classes, each with 4 to 13 subclasses, and named by a four-digit number.
- Oxidoreductases (dehydrogenases): catalyse oxidoreduction between two substrates S and S'.
- Transferases: catalyse the transfer of a group G (other than hydrogen) between a pair of substrates: .
- Hydrolases: catalyse hydrolysis of ester, ether, peptide, glycosidic, C-C, C-halide or P-N bonds.
- Lyases: catalyse removal of groups from substrates by mechanisms other than hydrolysis, leaving double bonds: .
- Isomerases: catalyse inter-conversion of optical, geometric or positional isomers.
- Ligases: catalyse the linking together of 2 compounds, for example joining C-O, C-S, C-N and P-O bonds.
| Class | What it catalyses |
|---|---|
| Oxidoreductases (dehydrogenases) | Oxidoreduction between two substrates |
| Transferases | Transfer of a group other than hydrogen from one substrate to another |
| Hydrolases | Hydrolysis of ester, ether, peptide, glycosidic, C-C, C-halide or P-N bonds |
| Lyases | Removal of groups without hydrolysis, leaving double bondsQ Re-NEET 2024: lyases remove groups by mechanisms other than hydrolysis, leaving double bonds. NEET 2026 showed the same reaction as an equation. |
| Isomerases | Inter-conversion of optical, geometric or positional isomers |
| Ligases | Linking two compounds: C-O, C-S, C-N and P-O bondsQ Re-NEET 2024: ligases join C-O, C-N and P-O bonds; C-C was the bond not in NCERT's ligase list. |
Practise this conceptself-check · 5 quick reps
The same idea in a real exam question:
Example 3 · Biomolecules · Enzymes
Ligases in NCERT do not list C-C
Lyases do not use water
Transferases move a group other than hydrogen
Concept 4 of 4: Cofactors: prosthetic groups, coenzymes and metal ions
Definition
- Enzymes are made of one or several polypeptide chains. In many cases non-protein parts called cofactors must be bound to make the enzyme catalytically active. Then the protein portion is called the apoenzyme.
- There are three kinds of cofactor: prosthetic groups, coenzymes and metal ions.
- Prosthetic groups are organic compounds tightly bound to the apoenzyme. In peroxidase and catalase, which break hydrogen peroxide down to water and oxygen, haem is the prosthetic group and is part of the active site.
- Coenzymes are also organic, but their association with the apoenzyme is only transient, usually during catalysis. One coenzyme serves many different enzyme reactions. Many coenzymes contain vitamins: NAD and NADP contain the vitamin niacin.
- Metal ions: some enzymes need a metal ion, which forms coordination bonds with side chains at the active site and with the substrate. Zinc is the cofactor of the proteolytic enzyme carboxypeptidase.
- When the cofactor is removed, the enzyme loses its catalytic activity: this shows how crucial cofactors are.
| Kind of cofactor | Nature and binding | NCERT example |
|---|---|---|
| Prosthetic group | Organic, tightly bound to the apoenzyme | Haem in peroxidase and catalase |
| Coenzyme | Organic, bound only for a short time during catalysis | NAD and NADP, which contain niacin |
| Metal ion | Forms coordination bonds with the active site and the substrate | Zinc in carboxypeptidaseQ NEET 2024: the cofactor of carboxypeptidase is zinc. |
| Not a cofactor: the apoenzyme | The protein portion of the enzyme | Inactive until its cofactor bindsQ NEET 2025: the protein portion of an enzyme is the apoenzyme. |
Practise this conceptself-check · 5 quick reps
The same idea in a real exam question:
Example 4 · Biomolecules · Enzymes
Haem belongs to catalase and peroxidase
Apoenzyme is the protein, not the helper
Tight versus transient
Summary — formulas & gotchas at a glance
A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.
Reference tables (4)
What enzymes are and how they act4 rows
| Step of the catalytic cycle | What happens |
|---|---|
| 1. Binding | The substrate binds to the active site of the enzyme, fitting into it |
| 2. Fitting tighter | Binding makes the enzyme change shape and fit more tightly around the substrate (the ES complex) |
| 3. Bond breaking | The active site breaks the chemical bonds of the substrate, and the enzyme-product complex forms |
| 4. Release | The enzyme releases the products, and the free enzyme is ready to bind another substrate molecule |
Factors that affect enzyme activity, and inhibition5 rows
| Factor | Effect on the enzyme |
|---|---|
| Low temperature | Temporarily inactive; activity returns when warmedQ NEET 2023: both statements were true: low temperature preserves the enzyme, heat denatures it, and a competitive inhibitor resembles the substrate. |
| High temperature | Activity destroyed, because the protein is denatured by heat |
| pH | Highest activity at the optimum pH; falls on either side |
| Rising substrate concentration | Velocity rises, then levels off at Vmax once every enzyme molecule is saturated |
| Competitive inhibitor | Looks like the substrate and takes the substrate-binding site, so activity falls |
The six classes of enzymes6 rows
| Class | What it catalyses |
|---|---|
| Oxidoreductases (dehydrogenases) | Oxidoreduction between two substrates |
| Transferases | Transfer of a group other than hydrogen from one substrate to another |
| Hydrolases | Hydrolysis of ester, ether, peptide, glycosidic, C-C, C-halide or P-N bonds |
| Lyases | Removal of groups without hydrolysis, leaving double bondsQ Re-NEET 2024: lyases remove groups by mechanisms other than hydrolysis, leaving double bonds. NEET 2026 showed the same reaction as an equation. |
| Isomerases | Inter-conversion of optical, geometric or positional isomers |
| Ligases | Linking two compounds: C-O, C-S, C-N and P-O bondsQ Re-NEET 2024: ligases join C-O, C-N and P-O bonds; C-C was the bond not in NCERT's ligase list. |
Cofactors: prosthetic groups, coenzymes and metal ions4 rows
| Kind of cofactor | Nature and binding | NCERT example |
|---|---|---|
| Prosthetic group | Organic, tightly bound to the apoenzyme | Haem in peroxidase and catalase |
| Coenzyme | Organic, bound only for a short time during catalysis | NAD and NADP, which contain niacin |
| Metal ion | Forms coordination bonds with the active site and the substrate | Zinc in carboxypeptidaseQ NEET 2024: the cofactor of carboxypeptidase is zinc. |
| Not a cofactor: the apoenzyme | The protein portion of the enzyme | Inactive until its cofactor bindsQ NEET 2025: the protein portion of an enzyme is the apoenzyme. |
Watch out for (12)
- Not every enzyme is a protein→ What enzymes are and how they act
- Enzymes, unlike inorganic catalysts, fail at high temperature→ What enzymes are and how they act
- Bonds break before the products leave→ What enzymes are and how they act
- Cold does not destroy an enzyme→ Factors that affect enzyme activity, and inhibition
- More substrate does not help past Vmax→ Factors that affect enzyme activity, and inhibition
- Competitive inhibitors look like the substrate→ Factors that affect enzyme activity, and inhibition
- Ligases in NCERT do not list C-C→ The six classes of enzymes
- Lyases do not use water→ The six classes of enzymes
- Transferases move a group other than hydrogen→ The six classes of enzymes
- Haem belongs to catalase and peroxidase→ Cofactors: prosthetic groups, coenzymes and metal ions
- Apoenzyme is the protein, not the helper→ Cofactors: prosthetic groups, coenzymes and metal ions
- Tight versus transient→ Cofactors: prosthetic groups, coenzymes and metal ions
Test yourself on a real paper
Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.