PYQ Vault

NEET Zoology · Biotechnology: Principles and Processes

Processes and Bioreactors

The steps of recombinant DNA technology in order: isolating DNA, cutting it, amplifying the gene, ligating it and putting it into a host, then growing the product in a bioreactor and purifying it by downstream processing; plus somatic hybridisation of plant protoplasts.

Why this matters

Eight NEET questions from 2021 to 2026. Which molecule chilled ethanol precipitates was asked twice in the same words (NEET 2021 and NEET 2023), and Re-NEET 2026 asked why lysozyme and cellulase are used. Bioreactors came in NEET 2024 and NEET 2025, and somatic hybridisation in NEET 2024 and NEET 2026.

Concept 1 of 3: Isolating DNA and the order of steps

DNA sits locked inside cells, tangled with proteins and mixed with RNA, sugars and fats. So first you break the cells open with the right enzyme for their wall, then digest away everything that is not DNA, and finally pour in cold ethanol so the DNA comes out as fine threads. Only then can you cut it, copy the gene, stitch it into a vector and put it into a host.

Definition

Isolating the genetic material (DNA):

  • DNA is enclosed within membranes, so the cell must be broken open to release DNA along with RNA, proteins, polysaccharides and lipids.
  • Enzymes break the cells: lysozyme for bacteria, cellulase for plant cells, chitinase for fungi.
  • Genes lie on long DNA molecules intertwined with proteins such as histones.
  • RNA is removed with ribonuclease; proteins with protease; other molecules by suitable treatments.
  • Purified DNA finally precipitates out after the addition of chilled ethanol, seen as a collection of fine threads in the suspension.

Then, in order:

  • Cutting: the purified DNA is incubated with a restriction enzyme at its optimal conditions; agarose gel electrophoresis checks the progress of the digestion. The vector DNA is cut with the same enzyme.
  • Isolating the fragment: the desired DNA fragment is separated and eluted from the gel.
  • Amplification of the gene of interest using PCR.
  • Ligation: the cut gene of interest and the cut vector are mixed with ligase, giving recombinant DNA.
  • Insertion into the host. If the recombinant DNA carries resistance to an antibiotic such as ampicillin, cells spread on ampicillin plates grow only if they are transformants.
  • Culturing the host on a large scale and obtaining the foreign gene product.
Cell or moleculeEnzyme or step that deals with it
Bacterial cellLysozymeQ
Re-NEET 2026: lysozyme for bacteria and cellulase for plants, because isolating DNA needs the cells broken open.
Plant cellCellulase
Fungal cellChitinase
RNARibonuclease
Proteins (such as histones)Protease
Purified DNAPrecipitated by chilled ethanol as fine threadsQ
NEET 2023: chilled ethanol precipitates DNA, not RNA, histones or polysaccharides.
Order of the main stepsCut with a restriction enzyme, isolate the fragment, amplify by PCR, insert into the hostQ
NEET 2023: B, C, D, A, that is cutting, isolating the fragment, PCR, then insertion into the host.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2021 · NEET (UG) 2021 — 12 Sep 2021 · Q130Moderate

Example 1 · Biotechnology: Principles and Processes · Processes and Bioreactors

During the purification process for recombinant DNA technology, addition of chilled ethanol precipitates out :

Lysozyme for bacteria, cellulase for plants, chitinase for fungi

Each wall has its own enzyme: lysozyme (bacteria), cellulase (plant cells), chitinase (fungi). Mixing them is the usual distractor.

Chilled ethanol brings out DNA

RNA is destroyed by ribonuclease and proteins such as histones by protease. What chilled ethanol precipitates is the purified DNA.

Concept 2 of 3: Bioreactors and downstream processing

A flask in the lab gives a spoonful of product, not the tonnes a factory needs. A bioreactor is a big, closely controlled tank where cells grow at their best: stirred, aerated, at the right temperature and pH, with the foam kept down. Once the cells have made the product, it still has to be separated, purified, preserved and tested before anyone can use it.

Definition

Bioreactors:

  • Small volume cultures cannot yield appreciable quantities of product, so bioreactors are used, where large volumes (100 to 1000 litres) of culture can be processed.
  • A bioreactor is a vessel where raw materials are biologically converted into specific products, individual enzymes and so on, using microbial, plant, animal or human cells.
  • It provides the optimal growth conditions (temperature, pH, substrate, salts, vitamins, oxygen) for the desired product.
  • The most commonly used bioreactors are of the stirring type. A stirred-tank reactor is usually cylindrical or has a curved base to help mixing; the stirrer gives even mixing and oxygen availability. Alternatively, air can be bubbled through the reactor (a sparged stirred-tank bioreactor).
  • It has an agitator system, an oxygen delivery system, a foam control system, a temperature control system, a pH control system and sampling ports to withdraw small volumes of culture.
  • In continuous culture, used medium is drained from one side while fresh medium is added from the other, keeping the cells in their most active log (exponential) phase.

Downstream processing:

  • After the biosynthetic stage the product is separated and purified: together these are downstream processing.
  • It is formulated with suitable preservatives, goes through clinical trials (as for drugs), and each product needs strict quality control testing.
Part or ideaWhat it does
Motor and stirrer (flat bladed impeller)Mixes the contents evenly and spreads oxygen
Foam breakerPart of the foam control system; keeps the foam down at the topQ
NEET 2025: the part labelled C in the stirred-tank figure was the foam breaker.
Sterile airBubbled (sparged) through the culture in a sparged stirred-tank bioreactor
Temperature and pH controlKeep the conditions optimal
Sampling portsLet small volumes of culture be withdrawn
Continuous cultureKeeps the cells in the log (exponential) phase
Downstream processingSeparation, purification, formulation, clinical trials and quality control
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2024 · NEET (UG) 2024 — 05 May 2024 · Q153Moderate

Example 2 · Biotechnology: Principles and Processes · Processes and Bioreactors

Which of the following statements is incorrect?

Bioreactors are for large volumes

Bioreactors exist because small cultures cannot give appreciable product. They process 100 to 1000 litres, not small bacterial cultures.

Downstream comes after biosynthesis

Downstream processing is everything after the product is made: separation, purification, formulation with preservatives, clinical trials and quality control.

Concept 3 of 3: Somatic hybridisation

Two plant varieties each have one good trait. Instead of crossing them through flowers, you take single body cells from each, strip off their walls so only the naked protoplasts are left, and fuse one protoplast from each. The fused hybrid cell is then grown into a whole new plant.

Definition

Somatic hybridisation (a plant tissue culture method):

  • Single cells are isolated from two different varieties of plants, each with a desirable character.
  • Their cell walls are digested, which gives naked protoplasts, surrounded only by the plasma membrane.
  • The protoplasts of the two varieties are fused to get a hybrid protoplast.
  • The hybrid protoplast is grown to form a new plant. Such plants are somatic hybrids, and the process is somatic hybridisation.
  • Example: a protoplast of tomato fused with one of potato gave the pomato, which did not have all the desired combination of characters.
StepWhat happens
1Isolate single cells from two different plant varieties
2Digest the cell walls
3Isolate the naked protoplastsQ
NEET 2024: somatic hybridisation fuses protoplasts, not callus, somatic embryos or pollen.
4Fuse them to get a hybrid protoplast
5Grow the hybrid protoplast into a new plant, the somatic hybrid
Practise this conceptself-check · 3 quick reps

The same idea in a real exam question:

NEET · 2026 · NEET (UG) 2026 — 03 May 2026 · Q112Moderate

Example 3 · Biotechnology: Principles and Processes · Processes and Bioreactors

Arrange the following steps of somatic hybridisation in a correct sequence. A. Digestion of cell walls. B. Isolation of naked protoplasts. C. Fusion of protoplasts to get hybrid protoplast. D. Isolation of single cells from two different varieites of plants. E. Growing of hybrid protoplast to form a new plant. Choose the correct answer from the options given below:

Protoplasts are fused, not pollen or callus

Somatic hybridisation fuses protoplasts, cells whose walls have been digested away. It does not fuse pollen, callus or somatic embryos.

Walls are digested before protoplasts are isolated

The order is: isolate single cells, digest the walls, isolate naked protoplasts, fuse them, then grow the hybrid.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Reference tables (3)

Isolating DNA and the order of steps7 rows
Cell or moleculeEnzyme or step that deals with it
Bacterial cellLysozymeQ
Re-NEET 2026: lysozyme for bacteria and cellulase for plants, because isolating DNA needs the cells broken open.
Plant cellCellulase
Fungal cellChitinase
RNARibonuclease
Proteins (such as histones)Protease
Purified DNAPrecipitated by chilled ethanol as fine threadsQ
NEET 2023: chilled ethanol precipitates DNA, not RNA, histones or polysaccharides.
Order of the main stepsCut with a restriction enzyme, isolate the fragment, amplify by PCR, insert into the hostQ
NEET 2023: B, C, D, A, that is cutting, isolating the fragment, PCR, then insertion into the host.
Bioreactors and downstream processing7 rows
Part or ideaWhat it does
Motor and stirrer (flat bladed impeller)Mixes the contents evenly and spreads oxygen
Foam breakerPart of the foam control system; keeps the foam down at the topQ
NEET 2025: the part labelled C in the stirred-tank figure was the foam breaker.
Sterile airBubbled (sparged) through the culture in a sparged stirred-tank bioreactor
Temperature and pH controlKeep the conditions optimal
Sampling portsLet small volumes of culture be withdrawn
Continuous cultureKeeps the cells in the log (exponential) phase
Downstream processingSeparation, purification, formulation, clinical trials and quality control
Somatic hybridisation5 rows
StepWhat happens
1Isolate single cells from two different plant varieties
2Digest the cell walls
3Isolate the naked protoplastsQ
NEET 2024: somatic hybridisation fuses protoplasts, not callus, somatic embryos or pollen.
4Fuse them to get a hybrid protoplast
5Grow the hybrid protoplast into a new plant, the somatic hybrid

Watch out for (6)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper