PYQ Vault

Homi Bhabha Class 9 Physics · Formula sheet

Sound formulas

3 formulas, 5 reference tables and 25 common traps for Homi Bhabha Class 9 Physics Sound, grouped by subtopic.

Full notes with worked examples

Nature of Sound and the Voice

Learn this subtopic in the notes

Sound as a mechanical, longitudinal wave

WaveNeeds a medium?Type
SoundYes: a solid, liquid or gasLongitudinal: particles move along the wave
LightNo: it crosses empty space from the SunTransverse (electromagnetic)
Radio waveNoTransverse (electromagnetic)
Wave along a stretched stringYes: the stringTransverse: the string moves across the wave
A wave can need a medium and still be transverse.
Of the waves in this table, only sound is longitudinal.

How the voice and musical instruments make sound

FamilyWhat vibratesExamples
String instrumentsA stretched stringSitar, violin, guitar, veena
Wind instrumentsA column of air inside a tubeFlute, trumpet, clarinet, shehnai
Percussion instrumentsA stretched skin, or a metal or wooden body that is struckTabla, drum, tambourine, cymbals
The human voiceTwo vocal cords in the larynxSpeech and singing
An odd-one-out question usually hides one instrument from a different family.

Common traps

Calling sound a transverse wave

In sound the particles move back and forth along the path of the wave, so sound is longitudinal. Light, radio waves and a wave on a string are transverse.

Thinking the air travels to your ear

Each particle only vibrates about its place. The energy of the vibration is what reaches you, not the air near the source.

Thinking light needs a medium

Light and radio waves are electromagnetic waves and cross empty space. Only mechanical waves, such as sound, need a medium.

Different numbers of vocal cords

Men, women and children all have two vocal cords. It is the length of the cords that differs, and so the pitch of the voice.

Longer cords give a higher voice

It is the reverse: longer, heavier vocal cords vibrate more slowly and give a lower pitch, which is why men's voices are deepest.

Calling every instrument with a skin a string instrument

A tambourine and a tabla are struck, so they are percussion instruments, even though both have a stretched skin.

Frequency, Pitch and Loudness

Learn this subtopic in the notes

Wave speed, frequency and time period: v = fλ

Wave relations

v=fλT=1fv = f\lambda \qquad T = \frac{1}{f}
  • vvspeed of the wave, in m/s
  • fffrequency, in hertz (Hz)
  • λλwavelength, in metres
  • TTtime period, in seconds

Pitch, loudness and reading a wave diagram

PropertyDepends onWhat to look for in a wave diagram
PitchFrequencyMore complete waves in the same time: higher pitch
LoudnessAmplitudeTaller crests and deeper troughs: louder; a small amplitude is a soft sound
Quality (timbre)Shape of the waveTwo waves of the same frequency and height but different shapes
NoiseIrregular vibrationA jagged wave with no repeating pattern
Pitch and loudness are separate: a high note can be soft and a low note can be loud.

Common traps

Leaving ms or kHz unconverted

Change milliseconds to seconds and kilohertz to hertz first. A time period of 2 ms is 0.002 s, so the frequency is 500 Hz, not 0.5 Hz.

Multiplying instead of dividing for the time period

The time period is 1 divided by the frequency. For 50 Hz it is 150=0.02\frac{1}{50} = 0.02 s, not 50 s.

Thinking a higher note travels faster

In one medium every sound travels at the same speed. A higher frequency only shortens the wavelength.

Mixing up pitch and loudness

Pitch comes from frequency and loudness from amplitude. A soft wave has a small height, whatever its number of waves.

Reading the taller wave as the higher pitch

Height is amplitude, which decides loudness. For pitch, count how many complete waves fit into the same time.

Calling every wave in a diagram a note

An irregular, jagged wave is noise. A musical note repeats the same shape again and again.

Speed of Sound

Learn this subtopic in the notes

What sets the speed of sound in a gas

Speed of sound in a gas

v∝TMv∝1ρv1v2=M2M1v \propto \sqrt{\frac{T}{M}} \qquad v \propto \frac{1}{\sqrt{\rho}} \qquad \frac{v_1}{v_2} = \sqrt{\frac{M_2}{M_1}}
  • vvspeed of sound in the gas
  • TTabsolute temperature of the gas, in kelvin
  • MMmolecular mass of the gas
  • ρρdensity of the gas

Speed of sound in solids, liquids, gases and a vacuum

StateMediumSpeed of sound at 25 °C
SolidAluminium6420 m/s
SolidNickel6040 m/s
SolidSteel5960 m/s
SolidBrass4700 m/s
SolidGlass (flint)3980 m/s
LiquidSea water1531 m/s
LiquidDistilled (pure) water1498 m/s
GasHydrogen1284 m/s
GasHelium965 m/s
GasAir346 m/s
GasOxygen316 m/s
GasSulphur dioxide213 m/s
NoneVacuumSound cannot travel
Always first in an ascending order.
The standard school table of values at 25 °C. Other tables give slightly different numbers for some solids.

Common traps

Putting a gas after a liquid

Every liquid in the table carries sound faster than every gas: sea water and pure water are about 1500 m/s, air only about 346 m/s.

Forgetting the vacuum

When a vacuum is one of the choices it is always slowest: sound cannot travel through it at all.

Thinking all metals are equally fast

Metals differ: aluminium (6420 m/s) is faster than brass (4700 m/s), and glass is slower than both.

Making speed depend on pressure

At a fixed temperature, pressure and density rise together, so the speed of sound in a gas does not change. Only temperature and the kind of gas matter.

Saying speed falls as temperature rises

The speed is directly proportional to the square root of the absolute temperature. Warmer gas, faster sound.

Forgetting the square root

Speed goes as 1 divided by the square root of density, not as 1 divided by density. Hydrogen is 16 times lighter than oxygen, so sound is 16=4\sqrt{16} = 4 times faster in it, not 16 times.

Thinking a heavier gas is faster

It is the other way round: sulphur dioxide (heavy) is slowest of the gases in the table and hydrogen (lightest) is fastest.

Echo, Ultrasound and Infrasound

Learn this subtopic in the notes

Echo and repeated reflection of sound

Echo

t=2dvd=vt2dmin=v×0.12t = \frac{2d}{v} \qquad d = \frac{vt}{2} \qquad d_{min} = \frac{v \times 0.1}{2}
  • tttime between making the sound and hearing its echo, in seconds
  • dddistance to the reflecting surface, in metres
  • vvspeed of sound in the medium, in m/s

Infrasound, audible sound and ultrasound

Kind of soundFrequencyWho hears it or uses it
InfrasoundBelow 20 HzElephants, whales, rhinoceroses; given out by earthquakes
Audible sound20 Hz to 20 kHzHumans (and most animals)
UltrasoundAbove 20 kHzBats, dolphins, dogs, rats; SONAR, sonography, echocardiography, industry
Ultrasound is not louder than ordinary sound: it simply vibrates too fast for us to hear.

Common traps

Forgetting the return journey

The sound goes to the reflector and comes back, so use 2d. A wall 170 m away at 340 m/s gives an echo after 1 s, not 0.5 s.

Using 34.4 m as the least distance

34.4 m is the distance there and back in 0.1 s. The reflector itself need only be half of that, 17.2 m, away.

Thinking a stethoscope sends sound straight down the tube

The sound bounces again and again off the inner walls of the tube. That repeated reflection keeps it from spreading out and fading.

Calling SONAR a kind of sound

SONAR is a technique that uses ultrasound. When an option offers both 'ultrasound' and 'SONAR' for the uses of a sound, the sound is ultrasound.

Giving elephants ultrasound

Elephants use infrasound, below 20 Hz. Bats and dolphins are the ones that use ultrasound.

Thinking ultrasound means a loud sound

Ultrasound is about frequency, not loudness: it is any sound above 20 kHz, however soft.

More Homi Bhabha Class 9 Physics formula sheets