PYQ Vault

Homi Bhabha Class 9 Physics · Formula sheet

Current Electricity formulas

5 formulas, 7 reference tables and 33 common traps for Homi Bhabha Class 9 Physics Current Electricity, grouped by subtopic.

Full notes with worked examples

Static Electricity

Learn this subtopic in the notes

Charging by rubbing

Rubbed togetherBecomes negative (gains electrons)Becomes positive (loses electrons)
Plastic comb and dry hairCombHair
Glass rod and silk clothSilkGlass rod
Ebonite rod and woollen clothEbonite rodWool
Balloon and dry hairBalloonHair
In every pair, one body gains exactly the electrons the other loses.

Attraction, repulsion, induction and lightning

SituationWhat happensWhy
Two bodies with like chargesThey repelLike charges repel
Two bodies with unlike chargesThey attractUnlike charges attract
Charged comb near bits of paperThe paper is attractedInduction puts the opposite charge on the near side
Charged cloud above the groundLightning strikesInduced unlike charge on the ground pulls the cloud's charge across
Distance between two charges doubledThe force becomes one quarterThe force falls as the square of the distance grows
Only repulsion proves that both bodies are charged: attraction can also mean one body is neutral.

Common traps

Thinking positive charges move

When two bodies are rubbed, only electrons move. A body becomes positive because it has lost electrons, not because it has gained positive charge.

Gaining electrons makes a body positive

It is the other way round. Electrons are negative, so a body or atom that gains them becomes negative and one that loses them becomes positive.

Saying the air has no effect on static charge

Moist air helps the charge leak away. That is why a rubbed comb picks up paper well on a dry winter day and poorly in the rainy season.

Taking attraction as proof that both bodies are charged

A charged body attracts a neutral one too, by induction. Only repulsion shows for certain that both bodies are charged.

Making the force between charges depend on mass

The electric force depends on the size of the charges and the distance between them. The mass of the particles does not come into it.

Explaining lightning by like charges repelling

Lightning comes from unlike charges attracting: the cloud's charge induces the opposite charge below it, and the charge jumps across.

Current, Cells and Circuits

Learn this subtopic in the notes

Current, charge and electrons

Current and charge

I=QtQ=Itn=Qee=1.6×10−19 CI = \frac{Q}{t} \qquad Q = It \qquad n = \frac{Q}{e} \qquad e = 1.6 \times 10^{-19}\ \mathrm{C}
  • IIcurrent, in amperes (A)
  • QQcharge, in coulombs (C)
  • tttime, in seconds
  • nnnumber of electrons
  • eecharge on one electron

Cells and circuit symbols

CellPrimary or secondaryWhere it is used
Dry cellPrimary (not rechargeable)Torches, clocks, remote controls
Leclanché cellPrimary (not rechargeable)Older electric bells
Daniell cellPrimary (not rechargeable)Laboratory cell with copper and zinc
Lead acid cellSecondary (rechargeable)Car and inverter batteries
Nickel cadmium cellSecondary (rechargeable)Rechargeable torch cells, cordless tools
Lithium ion cellSecondary (rechargeable)Mobile phones, laptops
If a question asks which cell is rechargeable, look for the secondary cell among the choices.

Ammeter, voltmeter and keys in a circuit

DeviceWhat it doesHow it is connected
AmmeterMeasures current, in amperesIn series, so all the current passes through it
VoltmeterMeasures potential difference, in voltsIn parallel, across the part being measured
Plug keyOpens or closes the circuitIn series
RheostatChanges the current by changing the resistanceIn series
To spot the voltmeter in a diagram, find the meter whose two ends join both ends of the resistor.

Common traps

Taking the current's direction as the electrons' direction

Current is taken to flow from the positive terminal to the negative one outside the cell. Electrons move the opposite way, from negative to positive.

Leaving the time in minutes

Q = It needs the time in seconds. A current of 2 A for 1 minute moves 120 C, not 2 C.

Multiplying by the electron's charge

The number of electrons is the charge divided by 1.6×10−191.6 \times 10^{-19} C. Multiplying gives a tiny number, which cannot be a count of electrons.

Thinking a dry cell can be recharged

The dry cell, Leclanché cell and Daniell cell are primary cells and are thrown away when used up. Lead acid, nickel cadmium and lithium ion cells are the rechargeable ones.

Reading the short line of a cell as positive

In the cell symbol the longer line is the positive terminal and the shorter line the negative terminal.

Putting the voltmeter in series

A voltmeter always goes across the part whose potential difference you want. In series its high resistance would almost stop the current.

Putting the ammeter across a part

An ammeter goes in series, in the line of the current. Its low resistance means that, joined across a part, it would carry nearly all the current and read wrongly.

Ohm's Law and Resistance

Learn this subtopic in the notes

Ohm's law: V = IR

Ohm's law

V=IRI=VRR=VIV = IR \qquad I = \frac{V}{R} \qquad R = \frac{V}{I}
  • VVpotential difference, in volts (V)
  • IIcurrent, in amperes (A)
  • RRresistance, in ohms (Ω)

Length, thickness and resistance: R = ρl/A

Resistance of a wire

R=ρlAA=πr2R = \rho\frac{l}{A} \qquad A = \pi r^2
  • RRresistance, in ohms (Ω)
  • ρρresistivity of the material, in ohm metre (Ω m)
  • lllength of the wire, in metres
  • AAarea of cross-section, in square metres
  • rrradius of a round wire

Resistivity of materials and the effect of temperature

MaterialResistivity at 20 °C (Ω m)Use or note
Silver1.6 × 10⁻⁸The best conductor
Copper1.7 × 10⁻⁸Electric wires
Aluminium2.7 × 10⁻⁸Overhead power lines
Tungsten5.6 × 10⁻⁸Bulb filaments
Platinum10.6 × 10⁻⁸Hardly reacts, so used in special wires and contacts
Nichrome (an alloy)About 1.1 × 10⁻⁶Heating coils of irons and heaters
In increasing order: silver, copper, aluminium, tungsten, platinum, nichrome. Alloys come last.

Common traps

Using milliamperes as amperes

Change mA to A before using V = IR. A current of 100 mA through 30 Ω needs 3 V, not 3000 V.

Thinking the resistance changes with the voltage

For a metal wire at the same temperature, R stays the same. If V doubles, I doubles, and V divided by I is unchanged.

Thinking a thicker wire has more resistance

A thicker wire gives the current more room, so its resistance is less. Resistance falls as the area of cross-section grows.

Forgetting that area goes as the radius squared

Doubling the radius makes the area 4 times, not 2 times, so the resistance becomes one quarter, not one half.

Comparing pieces of different metals by l/A alone

Comparing l/A works only for pieces of the same material. Different metals have different resistivities, which must be included.

Treating resistivity like resistance

Cutting, stretching or thickening a wire changes its resistance, but its resistivity stays the same as long as the material and temperature do not change.

Thinking resistance vanishes at 0 °C

0 °C is only the freezing point of water. Resistance nearly vanishes close to absolute zero, 0 K, which is about −273 °C.

Writing the unit of resistivity as the ohm

Resistance is measured in ohms; resistivity is measured in ohm metres (Ω m).

Resistors in Series and Parallel

Learn this subtopic in the notes

Working out series and parallel circuits

Combining resistors

Rs=R1+R2+R31Rp=1R1+1R2+1R3Rp=R1R2R1+R2R_s = R_1 + R_2 + R_3 \qquad \frac{1}{R_p} = \frac{1}{R_1} + \frac{1}{R_2} + \frac{1}{R_3} \qquad R_p = \frac{R_1 R_2}{R_1 + R_2}
  • Rₛtotal resistance in series
  • Rₚtotal resistance in parallel
  • R₁, R₂, R₃the separate resistances, in ohms

Series and parallel: what stays the same and what divides

PropertySeriesParallel
CurrentThe same through every resistorDivides; more through the smaller resistor
Potential differenceDivides; more across the larger resistorThe same across every resistor
Total resistanceR = R₁ + R₂ + R₃, more than the largest1/R = 1/R₁ + 1/R₂ + 1/R₃, less than the smallest
If one part breaksThe whole circuit stopsThe other branches keep working
Everyday useA string of small decorative bulbsThe wiring of a house
In a true or false question, check each statement against the right column, not against the other.

Common traps

Saying the same current flows through parallel resistors

In parallel the potential difference is the same and the current divides. The same current through each resistor is the rule for series.

Adding resistances that are in parallel

Resistances add only in series. In parallel the reciprocals add, and the total comes out smaller than any one resistor.

Writing the parallel rule without its left side

It is the reciprocal of the total that equals the sum of the reciprocals: 1/R = 1/R₁ + 1/R₂. The total itself is not the sum of the reciprocals.

Forgetting to turn 1/R upside down

Adding the reciprocals gives 1/R, not R. For 2 Ω and 2 Ω in parallel, 1/R = 1, so R = 1 Ω.

Giving parallel currents the same ratio as the resistances

Each branch has the same potential difference, so the smaller resistance carries the larger current: the currents are in the inverse ratio of the resistances.

Getting a parallel total larger than one branch

The total resistance in parallel is always less than the smallest resistor. If your answer is bigger, you have added instead of using reciprocals.

Electrical Energy and Power

Learn this subtopic in the notes

Power, kilowatt hours and units

Electrical energy and power

P=VIE=Pt1 kWh=3.6×106 JP = VI \qquad E = Pt \qquad 1\ \mathrm{kWh} = 3.6 \times 10^6\ \mathrm{J}
  • PPpower, in watts (W) or kilowatts (kW)
  • VVpotential difference, in volts
  • IIcurrent, in amperes
  • EEenergy used, in joules or kWh
  • tttime, in seconds or hours

Heating effect, the fuse and the household supply

ItemFact to remember
Household supply in India220 V, 50 Hz alternating current
Live wireRed insulation; carries the 220 V supply
Neutral wireBlack insulation; completes the circuit
Earth wireGreen insulation; takes leaking current safely to the ground
Fuse wireAlloy of low melting point, in series in the live wire; melts if the current is too large
Heating coilNichrome: high resistivity and a high melting point
Bulb filamentTungsten: melts only at about 3400 °C, so it can glow white hot
These are the colours used in Indian school books; newer cables use brown for live and blue for neutral.

Common traps

Using watts and minutes in the kWh formula

Change watts to kilowatts and minutes to hours before multiplying. A 500 W iron used for 30 minutes uses 0.5 × 0.5 = 0.25 kWh, not 15000.

Taking 1 kWh as 1000 J

1 kWh is 1000 W for 3600 s, which is 3.6×1063.6 \times 10^6 J. The 1000 is watts, not joules.

Counting February as 28 days in a leap year

February has 29 days in a leap year such as 2016, 2020 or 2024. A monthly bill must use the real number of days.

Connecting a fuse in parallel

A fuse goes in series with the live wire, so all the current passes through it. In parallel it could not break the circuit.

Thinking a fuse works on the magnetic effect

A fuse works on the heating effect of current: too much current heats the alloy wire until it melts.

Picking 110 V or 210 V for India

The household supply in India is 220 V at 50 Hz. Other voltages in the options are there to catch a guess.

More Homi Bhabha Class 9 Physics formula sheets