PYQ Vault

Homi Bhabha Physics · Current Electricity

Resistors in Series and Parallel

In series one current flows through every resistor and the resistances add up; in parallel every resistor has the same potential difference, the current divides, and the total resistance is less than the smallest one.

Why this matters

Eight questions in the bank, two EASY and six MODERATE. Four pick the true or false statements about series and parallel connections (one of them asks why the appliances in a house are joined in parallel). The other four are short sums: finding one resistor from the total, the ratio of currents in two branches, and the ratio of potential differences across three branches.

Concept 1 of 2: Series and parallel: what stays the same and what divides

In series the resistors stand one after another on a single path, like people in one queue: everyone passes through every gate, so the current is the same and the hold-ups add up. In parallel each resistor has its own path between the same two points, like several open gates side by side: each gate faces the same push, the crowd splits, and more gates mean less hold-up overall.

Definition

  • Series: one path. The same current flows through each resistor. The potential difference divides, with a bigger share across a bigger resistor. Total resistance Rs=R1+R2+R3R_s = R_1 + R_2 + R_3, more than the largest one.
  • Parallel: separate paths between the same two points. The same potential difference acts across each resistor. The current divides, with more current through the smaller resistance. 1Rp=1R1+1R2+1R3\frac{1}{R_p} = \frac{1}{R_1} + \frac{1}{R_2} + \frac{1}{R_3}, so the total is less than the smallest one.
  • Joining resistors in parallel is a way to reduce the resistance of a circuit; joining them in series increases it.
  • Household appliances are joined in parallel: each gets the full supply voltage and so works at its rated power, each can be switched on or off by itself, and if one fails the rest keep working.
PropertySeriesParallel
CurrentThe same through every resistorDivides; more through the smaller resistor
Potential differenceDivides; more across the larger resistorThe same across every resistor
Total resistanceR = R₁ + R₂ + R₃, more than the largest1/R = 1/R₁ + 1/R₂ + 1/R₃, less than the smallest
If one part breaksThe whole circuit stopsThe other branches keep working
Everyday useA string of small decorative bulbsThe wiring of a house
In a true or false question, check each statement against the right column, not against the other.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

Homi Bhabha Class 9 · 2021 · Homi Bhabha Std IX (21 November 2021, online) · Q14Moderate

Example 1 · Current Electricity · Resistors in Series and Parallel

Select from the following , the correct reason of connecting all domestic electrical appliances in parallel ? 1. Every appliance should work with its original capacity. 2. Every appliance should get same potential differnce. 3. Same electric current should flow through every appliance. 4. All appliances can work if any one appliance unable to work.

Saying the same current flows through parallel resistors

In parallel the potential difference is the same and the current divides. The same current through each resistor is the rule for series.

Adding resistances that are in parallel

Resistances add only in series. In parallel the reciprocals add, and the total comes out smaller than any one resistor.

Writing the parallel rule without its left side

It is the reciprocal of the total that equals the sum of the reciprocals: 1/R = 1/R₁ + 1/R₂. The total itself is not the sum of the reciprocals.

Concept 2 of 2: Working out series and parallel circuits

Turn the whole group of resistors into one equivalent resistor, use V = IR for the whole circuit, then go back to each resistor. In parallel, start from the shared potential difference; in series, start from the shared current.

Definition

  • Series: Rs=R1+R2+…R_s = R_1 + R_2 + \dots. Find I=VRsI = \frac{V}{R_s}, then the potential difference across each resistor is IR1IR_1, IR2IR_2 and so on.
  • Parallel: 1Rp=1R1+1R2+…\frac{1}{R_p} = \frac{1}{R_1} + \frac{1}{R_2} + \dots. For two resistors, Rp=R1R2R1+R2R_p = \frac{R_1 R_2}{R_1 + R_2}. For n equal resistors R, Rp=RnR_p = \frac{R}{n}.
  • In parallel each branch has the full V, so each current is VR\frac{V}{R} for that branch, and the currents are in the inverse ratio of the resistances.
  • When one resistor is given as a multiple of another (say R2=2R1R_2 = 2R_1), write every resistor in terms of R1R_1, find the total, and set it equal to the given value.

Combining resistors

Rs=R1+R2+R31Rp=1R1+1R2+1R3Rp=R1R2R1+R2R_s = R_1 + R_2 + R_3 \qquad \frac{1}{R_p} = \frac{1}{R_1} + \frac{1}{R_2} + \frac{1}{R_3} \qquad R_p = \frac{R_1 R_2}{R_1 + R_2}
  • Rₛtotal resistance in series
  • Rₚtotal resistance in parallel
  • R₁, R₂, R₃the separate resistances, in ohms

Worked example

Resistors of 3 Ω and 6 Ω are joined in parallel to a 12 V battery. Find the total resistance, the current drawn from the battery, and the current in each resistor.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

Homi Bhabha Class 9 · 2023 · Homi Bhabha Std IX (2023-24 competition) · Q22Moderate

Example 2 · Current Electricity · Resistors in Series and Parallel

From the following circuit diagram calculate the ratio of current I1I_1 and I2I_2

Forgetting to turn 1/R upside down

Adding the reciprocals gives 1/R, not R. For 2 Ω and 2 Ω in parallel, 1/R = 1, so R = 1 Ω.

Giving parallel currents the same ratio as the resistances

Each branch has the same potential difference, so the smaller resistance carries the larger current: the currents are in the inverse ratio of the resistances.

Getting a parallel total larger than one branch

The total resistance in parallel is always less than the smallest resistor. If your answer is bigger, you have added instead of using reciprocals.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (1)

  • Working out series and parallel circuits

    Combining resistors

    Rs=R1+R2+R31Rp=1R1+1R2+1R3Rp=R1R2R1+R2R_s = R_1 + R_2 + R_3 \qquad \frac{1}{R_p} = \frac{1}{R_1} + \frac{1}{R_2} + \frac{1}{R_3} \qquad R_p = \frac{R_1 R_2}{R_1 + R_2}

Reference tables (1)

Series and parallel: what stays the same and what divides5 rows
PropertySeriesParallel
CurrentThe same through every resistorDivides; more through the smaller resistor
Potential differenceDivides; more across the larger resistorThe same across every resistor
Total resistanceR = R₁ + R₂ + R₃, more than the largest1/R = 1/R₁ + 1/R₂ + 1/R₃, less than the smallest
If one part breaksThe whole circuit stopsThe other branches keep working
Everyday useA string of small decorative bulbsThe wiring of a house
In a true or false question, check each statement against the right column, not against the other.

Watch out for (6)

Test yourself on a real paper

Sit a past Homi Bhabha Class 9 paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.