PYQ Vault

Homi Bhabha Physics · Motion

Acceleration and Graphs of Motion

Acceleration is the change of velocity each second, a = (v − u)/t; on a displacement-time graph the slope is the velocity, and on a velocity-time graph the slope is the acceleration and the area underneath is the distance.

Why this matters

Nine questions in the bank, two EASY and seven MODERATE. Three are about acceleration (a table of velocities rising by equal steps, a car whose speed in km/h turns out unchanged, and s = ut + ½at²). Two read a displacement-time graph and four a velocity-time graph, for the distance, the average velocity, the acceleration or a slowing body.

Concept 1 of 3: Acceleration and the equations of motion

Press the accelerator and the car's speed climbs: 10 m/s, then 12, then 14, one step every second. That steady climb of 2 m/s every second is its acceleration. Brake and the speed falls each second: that is retardation, a negative acceleration. A car cruising at one steady velocity has no acceleration at all, however fast it goes.

Definition

  • Acceleration = change in velocity ÷ time: a=v−uta = \frac{v - u}{t}, in m/s2\mathrm{m/s^2}.
  • Uniformly accelerated motion: the velocity changes by equal amounts in equal times.
  • Retardation (deceleration) is acceleration against the motion: the velocity falls and a is negative.
  • If the velocity does not change, the acceleration is zero. Change km/h to m/s (× 518\frac{5}{18}) before comparing velocities.
  • For uniform acceleration: v=u+atv = u + at, s=ut+12at2s = ut + \frac{1}{2}at^2, v2=u2+2asv^2 = u^2 + 2as.

Equations of motion

a=v−utv=u+ats=ut+12at2v2=u2+2asa = \frac{v - u}{t} \qquad v = u + at \qquad s = ut + \frac{1}{2}at^2 \qquad v^2 = u^2 + 2as
  • uuinitial velocity, in m/s
  • vvfinal velocity, in m/s
  • aaacceleration, in m/s²
  • tttime, in seconds
  • ssdisplacement, in metres

Worked example

A scooter moving at 4 m/s speeds up uniformly at 2 m/s² for 5 s. Find its final velocity and the distance it covers in those 5 s.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

Homi Bhabha Class 9 · 2018 · Homi Bhabha Std IX (6 October 2018) · Q30Moderate

Example 1 · Motion · Acceleration and Graphs of Motion

The moving objects with initial velocity 7 m/s travels 92 m distance in 4 seconds. Find its acceleration?

Thinking a fast body must be accelerating

Acceleration is a change of velocity. A train going at a steady 100 km/h in a straight line has zero acceleration.

Comparing velocities in different units

Change km/h to m/s first. 18 km/h is 5 m/s, so a body going from 5 m/s to 18 km/h has not sped up at all.

Forgetting the half in s = ut + ½at²

From rest at 2 m/s² for 4 s, the distance is 12×2×16=16\frac{1}{2} \times 2 \times 16 = 16 m, not 32 m.

Thinking retardation is a separate quantity

Retardation is just acceleration that slows the body down. It has the same unit, m/s², and a negative sign.

Concept 2 of 3: Reading a displacement-time graph

A displacement-time graph shows where the body is at each moment. If the line climbs steadily, the body moves away at a steady velocity. If the line is flat, the body is not going anywhere. The steeper the line, the faster the body moves.

Definition

  • The slope of a displacement-time graph is the velocity.
  • A straight sloping line means equal displacements in equal times: uniform velocity, zero acceleration. Its velocity-time graph is a horizontal line.
  • A flat (horizontal) line means the position is not changing: the body is at rest.
  • A steeper straight line means a greater velocity.
  • A line sloping down towards the time axis means the body is moving back towards its starting point.
  • A line that curves upward, getting steeper, means the velocity is increasing: accelerated motion.
Shape of the displacement-time graphWhat the body is doing
Straight line sloping upMoving away with uniform velocity
Flat lineAt rest
Straight line sloping downComing back towards the start with uniform velocity
Curve getting steeperSpeeding up (accelerating)
Any straight sloping part is uniform motion, whether it slopes up or down.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

Homi Bhabha Class 9 · 2010 · Homi Bhabha Std IX (4 September 2010) · Q9Moderate

Example 2 · Motion · Acceleration and Graphs of Motion

The displacement – time graph of a body is as shown below. Which segment/s of the graph represent uniform motion ?

Reading a flat line as uniform motion

On a displacement-time graph a flat line means the body is at rest. Uniform motion is a straight line that slopes.

Reading a straight sloping line as acceleration

A straight displacement-time line has a constant slope, so the velocity is constant and the acceleration is zero.

Thinking a line sloping down means slowing down

On a displacement-time graph a straight line sloping down means the body is coming back towards its start at a steady velocity.

Concept 3 of 3: Reading a velocity-time graph

A velocity-time graph shows how fast the body goes at each moment. How steeply the line climbs tells you the acceleration. The area under the line tells you the distance, because distance is velocity × time, and a rectangle's area is height × width.

Definition

  • The slope of a velocity-time graph is the acceleration.
  • A horizontal line: uniform velocity, zero acceleration. A straight line rising: uniform acceleration. A straight line falling: uniform retardation (the body is slowing down).
  • The area under the graph between two times is the distance covered: a rectangle (v × t), a triangle (12\frac{1}{2} × base × height) or a trapezium (half the sum of the two velocities × time).
  • For uniform acceleration, average velocity = u+v2\frac{u + v}{2}, and distance = average velocity × time.
  • Read the scale on each axis (for example 1 cm = 5 s) and the units (km/h with hours, m/s with seconds).

Velocity-time graph

a=slope=v−uts=area under the graph=u+v2×ta = \text{slope} = \frac{v - u}{t} \qquad s = \text{area under the graph} = \frac{u + v}{2} \times t
  • uuvelocity at the start of the interval
  • vvvelocity at the end of the interval
  • ttlength of the time interval
  • ssdistance covered in the interval

Worked example

On a velocity-time graph, the velocity rises in a straight line from 4 m/s at t = 2 s to 20 m/s at t = 10 s. Find the acceleration, the average velocity and the distance covered between 2 s and 10 s.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

Homi Bhabha Class 9 · 2021 · Homi Bhabha Std IX (21 November 2021, online) · Q11Moderate

Example 3 · Motion · Acceleration and Graphs of Motion

Observe the velocity-Time graph carefully & determine distance covered by object (d), its average velocity(v) & Accleration (a) during the time interval of 5 to 30 seconds.

Taking the height of the line as the distance

The height of a velocity-time graph is the velocity. The distance is the area under the line between the two times.

Reading a falling velocity-time line as moving backwards

A velocity-time line falling towards zero means the body is slowing down (retardation), still moving forward.

Ignoring the scale

Read each axis by its scale. If 1 cm stands for 8 m/s, a point 2 cm up is 16 m/s, not 2 m/s.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (2)

  • Acceleration and the equations of motion

    Equations of motion

    a=v−utv=u+ats=ut+12at2v2=u2+2asa = \frac{v - u}{t} \qquad v = u + at \qquad s = ut + \frac{1}{2}at^2 \qquad v^2 = u^2 + 2as
  • Reading a velocity-time graph

    Velocity-time graph

    a=slope=v−uts=area under the graph=u+v2×ta = \text{slope} = \frac{v - u}{t} \qquad s = \text{area under the graph} = \frac{u + v}{2} \times t

Reference tables (1)

Reading a displacement-time graph4 rows
Shape of the displacement-time graphWhat the body is doing
Straight line sloping upMoving away with uniform velocity
Flat lineAt rest
Straight line sloping downComing back towards the start with uniform velocity
Curve getting steeperSpeeding up (accelerating)
Any straight sloping part is uniform motion, whether it slopes up or down.

Watch out for (10)

Test yourself on a real paper

Sit a past Homi Bhabha Class 9 paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.