Homi Bhabha Physics · Motion
Speed and Velocity
Rest and motion are judged against a reference point; distance is the whole path and displacement the straight line from start to finish, so speed is distance per unit time and velocity is speed in a given direction.
Why this matters
Nine questions in the bank, five EASY, three MODERATE and one HARD. Two ask what rest and motion mean (a person in a bus, a bullet that spins as it flies). Four set distance against displacement and speed against velocity, one of them a run round a circular track that ends where it began. Three are speed sums: two round a circular path, and the HARD one a car whose velocity doubles every two seconds.
Concept 1 of 3: Rest, motion and kinds of motion
Definition
- A body is at rest if its position does not change with time compared with a reference point, and in motion if it does.
- Rest and motion are relative: a passenger in a moving bus is at rest compared with the bus but moving compared with the trees outside.
- Linear motion is along a straight line; circular motion is along a circle; rotational motion is spinning about an axis; oscillatory (vibrational) motion is to and fro about a fixed point.
- One body can have two motions at once: a bullet fired from a rifle moves straight ahead (linear) and spins about its own axis (rotational); the wheel of a moving cycle rolls forward and turns.
| Kind of motion | What happens | Examples |
|---|---|---|
| Linear | Moves along a straight line | A car on a straight road, a stone dropped from a height |
| Circular | Moves along a circle | The tip of a clock's hand, a stone whirled on a string |
| Rotational | Spins about an axis | A spinning top, a fan, the Earth about its axis |
| Oscillatory (vibrational) | Moves to and fro about a fixed point | A swinging pendulum, a plucked guitar string |
Practise this conceptself-check · 4 quick reps
The same idea in a real exam question:
Example 1 · Motion · Speed and Velocity
Thinking rest is the same for everyone
Giving a body only one kind of motion
Calling a pendulum's swing circular motion
Concept 2 of 3: Distance and displacement, speed and velocity
Definition
- Distance: the total length of the path covered. Displacement: the shortest straight-line distance from the start to the end, in a stated direction.
- Displacement is never more than distance. It is zero when the body comes back to its start. Along a straight line in one direction, displacement equals distance (ratio 1 : 1).
- Speed = distance ÷ time. Velocity = displacement ÷ time: velocity is speed in a given direction.
- Average speed = total distance ÷ total time. Average velocity = total displacement ÷ total time. After a full round on a closed path the average velocity is zero.
- Uniform motion: equal distances in equal intervals of time. Then the average speed equals the speed at every instant.
- Unit: m/s. To change km/h to m/s multiply by : 18 km/h = 5 m/s, 36 km/h = 10 m/s.
| Quantity | Meaning | Can it be zero for a body that has moved? |
|---|---|---|
| Distance | Total length of the path | No |
| Displacement | Straight line from start to end, with direction | Yes, after coming back to the start |
| Average speed | Total distance ÷ total time | No |
| Average velocity | Total displacement ÷ total time | Yes, after a full round |
Practise this conceptself-check · 4 quick reps
The same idea in a real exam question:
Example 2 · Motion · Speed and Velocity
Taking average velocity equal to average speed on a closed path
Thinking displacement can be more than distance
Thinking velocity is always bigger, or always smaller, than speed
Concept 3 of 3: Speed on straight and circular paths
Definition
- Speed = distance ÷ time: . Change minutes to seconds (or hours) first.
- One round of a circle of radius r is its circumference (or for diameter d), with or 3.14.
- Speed on a circular path = (number of rounds × ) ÷ time.
- Average speed = total distance ÷ total time. Only when every stretch takes the same time is it the plain average of the speeds.
- Distance in a stretch at a steady speed = speed × time.
Speed
- speed, in m/s
- distance, in metres
- time, in seconds
- radius of the circular path
- diameter of the circular path
Worked example
Practise this conceptself-check · 4 quick reps
The same idea in a real exam question:
Example 3 · Motion · Speed and Velocity
Averaging the speeds when the times differ
Using the radius as the length of one round
Leaving the time in minutes
Summary — formulas & gotchas at a glance
A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.
Formulas (1)
Reference tables (2)
Rest, motion and kinds of motion4 rows
| Kind of motion | What happens | Examples |
|---|---|---|
| Linear | Moves along a straight line | A car on a straight road, a stone dropped from a height |
| Circular | Moves along a circle | The tip of a clock's hand, a stone whirled on a string |
| Rotational | Spins about an axis | A spinning top, a fan, the Earth about its axis |
| Oscillatory (vibrational) | Moves to and fro about a fixed point | A swinging pendulum, a plucked guitar string |
Distance and displacement, speed and velocity4 rows
| Quantity | Meaning | Can it be zero for a body that has moved? |
|---|---|---|
| Distance | Total length of the path | No |
| Displacement | Straight line from start to end, with direction | Yes, after coming back to the start |
| Average speed | Total distance ÷ total time | No |
| Average velocity | Total displacement ÷ total time | Yes, after a full round |
Watch out for (9)
- Thinking rest is the same for everyone→ Rest, motion and kinds of motion
- Giving a body only one kind of motion→ Rest, motion and kinds of motion
- Calling a pendulum's swing circular motion→ Rest, motion and kinds of motion
- Taking average velocity equal to average speed on a closed path→ Distance and displacement, speed and velocity
- Thinking displacement can be more than distance→ Distance and displacement, speed and velocity
- Thinking velocity is always bigger, or always smaller, than speed→ Distance and displacement, speed and velocity
- Averaging the speeds when the times differ→ Speed on straight and circular paths
- Using the radius as the length of one round→ Speed on straight and circular paths
- Leaving the time in minutes→ Speed on straight and circular paths
Test yourself on a real paper
Sit a past Homi Bhabha Class 9 paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.