PYQ Vault

NEET Chemistry · Haloalkanes and Haloarenes

Elimination and Haloarenes

How alcoholic KOH removes HX from a haloalkane to give the more substituted alkene (Saytzeff rule), how the reagent decides between substitution and elimination, what haloalkanes do with metals, and how haloarenes are made and why they react so differently.

Why this matters

Six NEET questions from 2021 to 2026. Two are on the Saytzeff rule: naming the rule behind pent-2-ene from 2-bromopentane (2021) and the alkene from 2-methylcyclohexan-1-ol after PBr₃ and alcoholic KOH (2024). Two follow a propyl chain through alcoholic KOH and HBr: 1-bromopropane to propan-2-ol with aqueous KOH at the end (Re-NEET 2024), and propan-1-ol through PCl₅ and then HBr with a peroxide (2026). Two ask how haloarenes are made: chlorobenzene from benzene (2022) and the halogen that cannot be put on toluene with iron in the dark (Re-NEET 2024).

Concept 1 of 3: Dehydrohalogenation and the Saytzeff rule

The carbon that holds the halogen is the α-carbon; the carbons next to it are β-carbons. Alcoholic KOH pulls off a hydrogen from a β-carbon while the halogen leaves from the α-carbon, and a double bond forms between them. When there is more than one kind of β-hydrogen, more than one alkene can form, and the one with more alkyl groups on its double bond wins.

Definition

  • A haloalkane with a β-hydrogen, heated with alcoholic KOH, loses H from the β-carbon and X from the α-carbon to give an alkene. This is dehydrohalogenation, a β-elimination.
  • Saytzeff rule: when more than one alkene can form, the preferred product is the alkene with the greater number of alkyl groups attached to the doubly bonded carbon atoms.
  • 2-Bromopentane gives pent-2-ene (81%) as the major product and pent-1-ene (19%) as the minor one.
  • A haloalkane with no β-hydrogen, such as CH3Cl\text{CH}_3\text{Cl}, cannot undergo this elimination.

Dehydrohalogenation with alcoholic KOH

R-CH2-CH2-X+KOH (alc)→ΔR-CH=CH2+KX+H2O\text{R-CH}_2\text{-CH}_2\text{-X} + \text{KOH (alc)} \xrightarrow{\Delta} \text{R-CH=CH}_2 + \text{KX} + \text{H}_2\text{O}
  • X\text{X}the halogen, lost from the α-carbon
  • KOH (alc)\text{KOH (alc)}potassium hydroxide in alcohol, acting as a base

Diagram · which alkene is major

2-bromobutane + alc. KOHCH₃C1βCHC2αCH₂C3βCH₃C4BrH from C1H from C3each way: −HBrCH₂=CH–CH₂–CH₃but-1-eneminor1 alkyl group on C=CCH₃–CH=CH–CH₃but-2-enemajor (Saytzeff)2 alkyl groups on C=CAqueous KOH substitutes instead: butan-2-ol.

Saytzeff rule: the alkene with more alkyl groups on C=C is more stable, so it is the major product.

Worked example

2-Bromobutane, CH₃CHBrCH₂CH₃, is heated with alcoholic KOH. Name the major and the minor alkene.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2021 · NEET (UG) 2021 — 12 Sep 2021 · Q68Easy

Example 1 · Haloalkanes and Haloarenes · Elimination and Haloarenes

The major product formed in dehydrohalogenation reaction of 2-Bromo pentane is Pent-2-ene. This product formation is based on?

Count alkyl groups on the double bond, not hydrogens removed

The Saytzeff product is the alkene whose two doubly bonded carbons carry more alkyl groups in total. It is not the alkene formed by removing the more numerous hydrogens.

No β-hydrogen, no elimination

Dehydrohalogenation needs a hydrogen on a carbon next to the one that holds X. A halide such as CH3Cl\text{CH}_3\text{Cl} has none, so it cannot give an alkene this way.

Concept 2 of 3: Substitution or elimination, and reactions with metals

The same haloalkane can give an alcohol or an alkene, and the reagent decides which. In water, hydroxide acts as a nucleophile and replaces the halogen. In alcohol, with heat, it acts as a base and pulls off a β-hydrogen instead. In a chain of reactions, read the reagent on every arrow before you decide what forms.

Definition

  • Aqueous KOH substitutes: the haloalkane gives an alcohol.
  • Alcoholic KOH with heat eliminates: the haloalkane gives an alkene.
  • Substitution and elimination compete. Primary halides prefer SN2; tertiary halides react by SN1 or elimination. A bulkier nucleophile prefers to act as a base and remove a proton.
  • An alkene made this way can take up HBr again: by Markovnikov's rule without a peroxide, the other way round with a peroxide.
  • Grignard reagent: a haloalkane with magnesium in dry ether gives R-MgX. Any source of protons, even water, turns it into the hydrocarbon R-H, so it is made under dry conditions.
  • Wurtz reaction: a haloalkane with sodium in dry ether gives an alkane with double the carbons: 2 R-X+2 Na→R-R+2 NaX2\,\text{R-X} + 2\,\text{Na} \rightarrow \text{R-R} + 2\,\text{NaX}.
Reagent on 1-bromopropaneWhat happensProduct
Aqueous KOHSubstitution of Br by OHPropan-1-ol, CH3CH2CH2OH\text{CH}_3\text{CH}_2\text{CH}_2\text{OH}
Alcoholic KOH, heatElimination of HBrPropene, CH3CH=CH2\text{CH}_3\text{CH=CH}_2Q
Re-NEET 2024: alcoholic KOH, then HBr, then aqueous KOH turned 1-bromopropane into propan-2-ol.
KCNSubstitution of Br by CNButanenitrile, CH3CH2CH2CN\text{CH}_3\text{CH}_2\text{CH}_2\text{CN}
Mg in dry etherGrignard reagent formsCH3CH2CH2MgBr\text{CH}_3\text{CH}_2\text{CH}_2\text{MgBr}
Na in dry etherWurtz couplingHexane, CH3(CH2)4CH3\text{CH}_3(\text{CH}_2)_4\text{CH}_3
Aqueous KOH substitutes; alcoholic KOH eliminates.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2024 · Re-NEET (UG) 2024 — 23 Jun 2024 · Q77Moderate

Example 2 · Haloalkanes and Haloarenes · Elimination and Haloarenes

The major product C in the below mentioned reaction is:
CH3CH2CH2Br→Δalc. KOHA→HBrB→Δaq. KOHCCH_3CH_2CH_2Br \xrightarrow[\Delta]{alc.\ KOH} A \xrightarrow{HBr} B \xrightarrow[\Delta]{aq.\ KOH} C

Aqueous KOH substitutes, alcoholic KOH eliminates

With aqueous KOH a haloalkane gives an alcohol. With alcoholic KOH and heat it gives an alkene. The word in front of KOH decides the product.

Read the condition under HBr

HBr adds to propene by Markovnikov's rule to give 2-bromopropane. With a peroxide such as benzoyl peroxide written on the arrow it adds the other way, giving 1-bromopropane.

Water destroys a Grignard reagent

R-MgX reacts with water to give the hydrocarbon R-H. A Grignard reagent cannot be made or kept in water.

Concept 3 of 3: Making haloarenes and how they react

On a benzene ring the halogen shares a lone pair with the ring. That gives the C-X bond some double bond character, so it is shorter and harder to break, and a nucleophile pushes it out only under harsh conditions. The same lone pair makes the ring richer in electrons at the ortho and para positions, so electrophiles go there, though more slowly than on benzene.

Definition

  • Making aryl chlorides and bromides: an arene with Cl2\text{Cl}_2 or Br2\text{Br}_2 and a Lewis acid (iron or FeCl3\text{FeCl}_3) in the dark. Toluene gives the ortho and para isomers.
  • Iodination is reversible and needs an oxidising agent such as HNO3\text{HNO}_3 or HIO4\text{HIO}_4. Fluoroarenes are not made this way, because fluorine is too reactive.
  • A diazonium salt with Cu2Cl2\text{Cu}_2\text{Cl}_2 or Cu2Br2\text{Cu}_2\text{Br}_2 gives the aryl chloride or bromide (Sandmeyer reaction); with KI it gives the aryl iodide.
  • Haloarenes resist nucleophilic substitution: resonance gives the C-X bond partial double bond character; the sp2sp^2 carbon makes the bond shorter (C-Cl 169 pm in chlorobenzene, 177 pm in a haloalkane) and stronger; the phenyl cation is not stabilised by resonance, so SN1 cannot happen; and the electron-rich ring repels the nucleophile.
  • Chlorobenzene gives phenol only with NaOH at 623 K and 300 atm. A nitro group at the ortho or para position makes this much easier; at the meta position it has no such effect.
  • Electrophilic substitution: the halogen slightly deactivates the ring but directs incoming groups ortho and para.
  • Wurtz-Fittig: ArX + RX + Na in dry ether gives Ar-R. Fittig: two ArX with Na give Ar-Ar.
ReactionReagentsProduct
Chlorination of benzeneCl2\text{Cl}_2, anhydrous FeCl3\text{FeCl}_3, darkChlorobenzeneQ
NEET 2022: benzene with Cl₂ and anhydrous FeCl₃ was the route to chlorobenzene.
Halogenation of tolueneCl2\text{Cl}_2 or Br2\text{Br}_2, Fe, dark2-Halotoluene and 4-halotoluene; not used for fluorineQ
Re-NEET 2024: the method fails for X = F, because fluorine is too reactive.
Sandmeyer reactionBenzenediazonium chloride with Cu2Cl2\text{Cu}_2\text{Cl}_2Chlorobenzene
Replacement by OHChlorobenzene with NaOH, 623 K, 300 atm, then acidPhenol
Chlorination of chlorobenzeneCl2\text{Cl}_2, anhydrous FeCl3\text{FeCl}_31,2-Dichlorobenzene and 1,4-dichlorobenzene (major)
Nitration of chlorobenzeneConcentrated HNO3\text{HNO}_3 and concentrated H2SO4\text{H}_2\text{SO}_41-Chloro-2-nitrobenzene and 1-chloro-4-nitrobenzene (major)
Friedel-Crafts alkylationChlorobenzene with CH3Cl\text{CH}_3\text{Cl}, anhydrous AlCl3\text{AlCl}_31-Chloro-2-methylbenzene and 1-chloro-4-methylbenzene
Wurtz-Fittig reactionChlorobenzene with CH3Cl\text{CH}_3\text{Cl} and Na in dry etherToluene
Fittig reactionChlorobenzene with Na in dry etherBiphenyl
On the ring the halogen is hard to replace, and it sends new groups to the ortho and para positions.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2024 · Re-NEET (UG) 2024 — 23 Jun 2024 · Q94Moderate

Example 3 · Haloalkanes and Haloarenes · Elimination and Haloarenes

The following reaction method (toluene +X2→darkFe+ X_2 \xrightarrow[dark]{Fe} ortho- and para-halotoluene) is not suitable for the preparation of the corresponding haloarene products, due to high reactivity of halogen, when X is :

Iodine and fluorine do not go on like chlorine and bromine

Ring iodination is reversible and needs an oxidising agent to remove HI. Fluorine reacts too violently, so fluoroarenes are not made by direct halogenation with a Lewis acid.

Deactivating, yet ortho and para directing

A halogen on the ring makes electrophilic substitution slower than in benzene, but the groups that do enter go to the ortho and para positions, not meta.

A nitro group helps only at ortho or para

A nitro group at the ortho or para position makes a haloarene much easier to substitute with OH−\text{OH}^-. At the meta position it has no such effect.

Aryl halides do not react by SN1

Losing the halide would leave a phenyl cation, which is not stabilised by resonance. So aryl halides do not ionise the way tertiary, allylic and benzylic halides do.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (1)

  • Dehydrohalogenation and the Saytzeff rule

    Dehydrohalogenation with alcoholic KOH

    R-CH2-CH2-X+KOH (alc)→ΔR-CH=CH2+KX+H2O\text{R-CH}_2\text{-CH}_2\text{-X} + \text{KOH (alc)} \xrightarrow{\Delta} \text{R-CH=CH}_2 + \text{KX} + \text{H}_2\text{O}

Reference tables (2)

Substitution or elimination, and reactions with metals5 rows
Reagent on 1-bromopropaneWhat happensProduct
Aqueous KOHSubstitution of Br by OHPropan-1-ol, CH3CH2CH2OH\text{CH}_3\text{CH}_2\text{CH}_2\text{OH}
Alcoholic KOH, heatElimination of HBrPropene, CH3CH=CH2\text{CH}_3\text{CH=CH}_2Q
Re-NEET 2024: alcoholic KOH, then HBr, then aqueous KOH turned 1-bromopropane into propan-2-ol.
KCNSubstitution of Br by CNButanenitrile, CH3CH2CH2CN\text{CH}_3\text{CH}_2\text{CH}_2\text{CN}
Mg in dry etherGrignard reagent formsCH3CH2CH2MgBr\text{CH}_3\text{CH}_2\text{CH}_2\text{MgBr}
Na in dry etherWurtz couplingHexane, CH3(CH2)4CH3\text{CH}_3(\text{CH}_2)_4\text{CH}_3
Aqueous KOH substitutes; alcoholic KOH eliminates.
Making haloarenes and how they react9 rows
ReactionReagentsProduct
Chlorination of benzeneCl2\text{Cl}_2, anhydrous FeCl3\text{FeCl}_3, darkChlorobenzeneQ
NEET 2022: benzene with Cl₂ and anhydrous FeCl₃ was the route to chlorobenzene.
Halogenation of tolueneCl2\text{Cl}_2 or Br2\text{Br}_2, Fe, dark2-Halotoluene and 4-halotoluene; not used for fluorineQ
Re-NEET 2024: the method fails for X = F, because fluorine is too reactive.
Sandmeyer reactionBenzenediazonium chloride with Cu2Cl2\text{Cu}_2\text{Cl}_2Chlorobenzene
Replacement by OHChlorobenzene with NaOH, 623 K, 300 atm, then acidPhenol
Chlorination of chlorobenzeneCl2\text{Cl}_2, anhydrous FeCl3\text{FeCl}_31,2-Dichlorobenzene and 1,4-dichlorobenzene (major)
Nitration of chlorobenzeneConcentrated HNO3\text{HNO}_3 and concentrated H2SO4\text{H}_2\text{SO}_41-Chloro-2-nitrobenzene and 1-chloro-4-nitrobenzene (major)
Friedel-Crafts alkylationChlorobenzene with CH3Cl\text{CH}_3\text{Cl}, anhydrous AlCl3\text{AlCl}_31-Chloro-2-methylbenzene and 1-chloro-4-methylbenzene
Wurtz-Fittig reactionChlorobenzene with CH3Cl\text{CH}_3\text{Cl} and Na in dry etherToluene
Fittig reactionChlorobenzene with Na in dry etherBiphenyl
On the ring the halogen is hard to replace, and it sends new groups to the ortho and para positions.

Watch out for (9)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper