NEET Chemistry · Haloalkanes and Haloarenes
Preparation and Properties
How organic halides are classified by the carbon that holds the halogen, what the C-X bond is like, how boiling point and density change, and how haloalkanes are made from alcohols, from hydrocarbons and by halogen exchange.
Why this matters
Four NEET questions from 2021 to 2025. One asks the order of C-X bond enthalpy from CH₃-F to CH₃-I (2021), one asks the class of a halide whose halogen sits next to a C=C (2023), one asks the by-products of an alcohol with PCl₃ and with PCl₅ (2024), and one, marked HARD, counts the monochlorination products of 2-methylbutane, stereoisomers included (2025).
Concept 1 of 4: Classifying organic halides
Definition
- By the number of halogen atoms, halides are mono, di or poly haloalkanes or haloarenes.
- Alkyl halides are primary (1°), secondary (2°) or tertiary (3°) by the number of carbon atoms joined to the carbon that holds X.
- Allylic halide: X is on an carbon next to a C=C double bond.
- Benzylic halide: X is on an carbon joined directly to a benzene ring.
- Vinylic halide: X is on an carbon of a C=C double bond.
- Aryl halide: X is on an carbon of a benzene ring.
| Class | Carbon that holds X | Example |
|---|---|---|
| Primary alkyl | carbon joined to one other carbon | |
| Secondary alkyl | carbon joined to two other carbons | |
| Tertiary alkyl | carbon joined to three other carbons | |
| Allylic | carbon next to a C=C | Q NEET 2023: in C₆H₅-CH=CH-CH(X)-CH₂CH₃ the halogen is on an sp³ carbon next to the C=C, so the compound is an allylic halide. |
| Benzylic | carbon joined to a benzene ring | |
| Vinylic | carbon of a C=C | |
| Aryl | carbon of a benzene ring |
Practise this conceptself-check · 4 quick reps
The same idea in a real exam question:
Example 1 · Haloalkanes and Haloarenes · Preparation and Properties
A ring in the molecule does not make a halide benzylic
Allylic and vinylic are not the same
Concept 2 of 4: The C-X bond and physical properties
Definition
- The C-X bond is polar: carbon carries a partial positive charge and the halogen a partial negative charge.
- From F to I the halogen atom gets larger, so the bond length rises and the bond enthalpy falls.
- Methyl chloride, methyl bromide, ethyl chloride and some chlorofluoromethanes are gases at room temperature; higher members are liquids or solids.
- Haloalkanes boil higher than hydrocarbons of comparable molecular mass, because of their greater polarity and higher molecular mass, which give stronger forces between molecules.
- For the same alkyl group the boiling point order is RI > RBr > RCl > RF.
- For isomers the boiling point falls with branching: 1-bromobutane > 2-bromobutane > 2-bromo-2-methylpropane. A branched molecule has less surface area, so the forces between molecules are weaker.
- Of the dichlorobenzenes the para isomer melts highest, because it is symmetric and fits the crystal lattice better.
- Density rises with the number of carbon atoms, the number of halogen atoms and the atomic mass of the halogen. Bromo, iodo and polychloro compounds are denser than water.
- Haloalkanes are only slightly soluble in water but dissolve in organic solvents.
| Bond | Bond length in pm | Bond enthalpy in kJ/mol | Dipole moment in D |
|---|---|---|---|
| 139 | 452 | 1.847Q NEET 2021: the bond enthalpy order asked was CH₃-F > CH₃-Cl > CH₃-Br > CH₃-I. | |
| 178 | 351 | 1.860 | |
| 193 | 293 | 1.830 | |
| 214 | 234 | 1.636 |
Practise this conceptself-check · 4 quick reps
The same idea in a real exam question:
Example 2 · Haloalkanes and Haloarenes · Preparation and Properties
The largest dipole moment is C-Cl, not C-F
Branching lowers the boiling point
The longest C-X bond is the weakest
Concept 3 of 4: Haloalkanes from alcohols
Definition
- Hydrogen halides: primary and secondary alcohols need concentrated HCl with anhydrous . Tertiary alcohols react with concentrated HCl simply by shaking at room temperature.
- The order of reactivity of alcohols with a halogen acid is 3° > 2° > 1°.
- Phosphorus trihalides: . and are made in the flask from red phosphorus with bromine or iodine.
- Phosphorus pentachloride: .
- Thionyl chloride is preferred: both by-products, and HCl, are gases that escape, leaving a pure alkyl chloride.
- These methods do not make aryl halides from phenols: the C-O bond of phenol has partial double bond character and is hard to break.
Alcohol to alkyl chloride with thionyl chloride
- the alcohol
- the two gaseous by-products, which escape
Worked example
Practise this conceptself-check · 4 quick reps
The same idea in a real exam question:
Example 3 · Haloalkanes and Haloarenes · Preparation and Properties
PCl₃ and PCl₅ leave different by-products
Tertiary alcohols do not need ZnCl₂
Phenols are not converted like alcohols
Concept 4 of 4: Haloalkanes from hydrocarbons and by halogen exchange
Definition
- Free radical halogenation: an alkane with or in light or heat gives a mixture of isomeric mono and polyhaloalkanes that is hard to separate. Butane gives both 1-chlorobutane and 2-chlorobutane.
- Counting monochloro products: each set of equivalent hydrogens gives one structural isomer. If any carbon of a product carries four different groups (a chiral carbon), that product exists as two mirror-image forms, and both are counted when stereoisomers are asked. The next page explains these forms.
- HX to an alkene: the addition follows Markovnikov's rule, so propene with HBr gives mainly 2-bromopropane. With a peroxide present, HBr adds the other way (the peroxide effect); HCl and HI do not show this effect.
- Halogen to an alkene: in adds across the C=C to give a vicinal dibromide, and the reddish-brown colour of bromine disappears. This is a test for a C=C.
- Finkelstein reaction: an alkyl chloride or bromide with NaI in dry acetone gives the alkyl iodide. NaCl and NaBr do not dissolve in dry acetone, so they precipitate and the reaction goes forward.
- Swarts reaction: an alkyl chloride or bromide heated with a metal fluoride such as AgF, , or gives the alkyl fluoride.
Finkelstein reaction
- an alkyl chloride or bromide
- sodium chloride or bromide, which precipitates in dry acetone
Worked example
Practise this conceptself-check · 4 quick reps
The same idea in a real exam question:
Example 4 · Haloalkanes and Haloarenes · Preparation and Properties
Count two mirror-image forms only at a chiral carbon
Finkelstein needs dry acetone
The peroxide effect is for HBr only
Summary — formulas & gotchas at a glance
A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.
Formulas (2)
- Haloalkanes from alcohols
Alcohol to alkyl chloride with thionyl chloride
- Haloalkanes from hydrocarbons and by halogen exchange
Finkelstein reaction
Reference tables (2)
Classifying organic halides7 rows
| Class | Carbon that holds X | Example |
|---|---|---|
| Primary alkyl | carbon joined to one other carbon | |
| Secondary alkyl | carbon joined to two other carbons | |
| Tertiary alkyl | carbon joined to three other carbons | |
| Allylic | carbon next to a C=C | Q NEET 2023: in C₆H₅-CH=CH-CH(X)-CH₂CH₃ the halogen is on an sp³ carbon next to the C=C, so the compound is an allylic halide. |
| Benzylic | carbon joined to a benzene ring | |
| Vinylic | carbon of a C=C | |
| Aryl | carbon of a benzene ring |
The C-X bond and physical properties4 rows
| Bond | Bond length in pm | Bond enthalpy in kJ/mol | Dipole moment in D |
|---|---|---|---|
| 139 | 452 | 1.847Q NEET 2021: the bond enthalpy order asked was CH₃-F > CH₃-Cl > CH₃-Br > CH₃-I. | |
| 178 | 351 | 1.860 | |
| 193 | 293 | 1.830 | |
| 214 | 234 | 1.636 |
Watch out for (11)
- A ring in the molecule does not make a halide benzylic→ Classifying organic halides
- Allylic and vinylic are not the same→ Classifying organic halides
- The largest dipole moment is C-Cl, not C-F→ The C-X bond and physical properties
- Branching lowers the boiling point→ The C-X bond and physical properties
- The longest C-X bond is the weakest→ The C-X bond and physical properties
- PCl₃ and PCl₅ leave different by-products→ Haloalkanes from alcohols
- Tertiary alcohols do not need ZnCl₂→ Haloalkanes from alcohols
- Phenols are not converted like alcohols→ Haloalkanes from alcohols
- Count two mirror-image forms only at a chiral carbon→ Haloalkanes from hydrocarbons and by halogen exchange
- Finkelstein needs dry acetone→ Haloalkanes from hydrocarbons and by halogen exchange
- The peroxide effect is for HBr only→ Haloalkanes from hydrocarbons and by halogen exchange
Test yourself on a real paper
Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.