NEET Chemistry · Organic Chemistry – Some Basic Principles and Techniques
Purification and Analysis
How an organic compound is purified (sublimation, crystallisation, extraction, chromatography and the four kinds of distillation), how Lassaigne's test shows nitrogen, sulphur, halogens and phosphorus, and how the percentage of each element is found.
Why this matters
Ten NEET questions from 2022 to 2026, the most of any page in this chapter. Four are on purification: sublimation named from its principle (NEET 2024), the boiling point in steam distillation (Re-NEET 2024), four mixtures matched to four kinds of distillation (2025) and separating the two nitrotoluenes made by nitrating toluene (NEET 2026). Three are on Lassaigne's test: the blood red complex given by nitrogen and sulphur together (2023), the one reaction that is not part of the test (2025) and what sodium fusion does to the elements (2026). Two are on estimation: carbon and hydrogen from combustion (Re-NEET 2024) and which compound Kjeldahl's method can analyse (2022). One, from NEET 2026, is a salt-analysis question: the acetate ion found by its smell of vinegar.
Concept 1 of 4: Sublimation, crystallisation, extraction and chromatography
Definition
- Sublimation: some solids change from solid to vapour on heating without becoming liquid. Such a solid is separated from impurities that do not sublime.
- Crystallisation: based on the difference in solubility of the compound and its impurities in a suitable solvent. The impure compound is dissolved in the hot solvent and crystallises on cooling. Coloured impurities are removed by activated charcoal; repeated crystallisation removes impurities of similar solubility.
- Differential extraction: an aqueous solution is shaken with an organic solvent in which the compound dissolves better, in a separating funnel. If the compound dissolves only a little in the organic solvent, continuous extraction is used.
- Chromatography: a mixture is put on a stationary phase and a mobile phase (a solvent) moves over it, carrying each part a different distance.
- Adsorption chromatography uses alumina or silica gel: column chromatography (the most strongly adsorbed part stays near the top) and thin layer chromatography (TLC). Paper chromatography is partition chromatography: the stationary phase is the water held in the paper.
- Retardation factor: .
- Colourless spots on a TLC plate are seen under ultraviolet light, with iodine (brown spots) or, for amino acids, with ninhydrin.
| Method | Based on | Used for |
|---|---|---|
| Sublimation | A solid going straight to vapour on heating | A solid that sublimes, freed from one that does not NEET 2024 described the principle (solid to vapour without becoming liquid) and asked for the name of the method. |
| Crystallisation | Different solubilities of compound and impurity in a solvent | Purifying a solid |
| Differential extraction | The compound dissolving better in an organic solvent than in water | Taking a compound out of an aqueous solution |
| Column and thin layer chromatography | Different adsorption on alumina or silica gel | Separating the parts of a mixture |
| Paper chromatography | Different partition between the water in the paper and the solvent | Separating small amounts, such as dyes or amino acids |
Practise this conceptself-check · 4 quick reps
The same idea in a real exam question:
Example 1 · Organic Chemistry – Some Basic Principles and Techniques · Purification and Analysis
Sublimation skips the liquid state
An value cannot be more than 1
Paper chromatography is partition, not adsorption
Concept 2 of 4: Choosing a distillation method
Definition
- Simple distillation: separates a volatile liquid from a non-volatile impurity, or two liquids whose boiling points are far apart.
- Fractional distillation: for liquids whose boiling points are close. The vapours rise through a fractionating column, where the higher-boiling liquid condenses back again and again.
- Distillation under reduced pressure: for a liquid with a very high boiling point, or one that decomposes at or below its boiling point. Lower pressure makes it boil at a lower temperature.
- Steam distillation: for a compound that is steam volatile and does not mix with water. Steam is passed through it, and the mixture boils when the vapour pressure of water plus that of the compound equals the atmospheric pressure. So each part boils below its own boiling point, and the mixture boils close to but below 373 K (100 °C).
| Method | When to use it | Example |
|---|---|---|
| Simple distillation | Boiling points far apart | Chloroform (334 K) from aniline (457 K) |
| Fractional distillation | Boiling points close together | The fractions of crude oil in the petroleum industry NEET 2026: the o- and p-nitrotoluene made by nitrating toluene were separated by fractional distillation. |
| Distillation under reduced pressure | The liquid decomposes at or below its boiling point | Glycerol from spent-lye in the soap industry |
| Steam distillation | Steam volatile and does not mix with water | Aniline from a mixture of aniline and water Re-NEET 2024: a compound boiling at 250 °C, steam distilled, comes over close to but below 100 °C. |
Practise this conceptself-check · 4 quick reps
The same idea in a real exam question:
Example 2 · Organic Chemistry – Some Basic Principles and Techniques · Purification and Analysis
| List-I (Mixture) | List-II (Method of separation) |
|---|---|
| A. | (I) Distillation under reduced pressure |
| B. Crude oil in petroleum industry | (II) Steam distillation |
| C. Glycerol from spent-lye | (III) Fractional distillation |
| D. Aniline - water | (IV) Simple distillation |
Steam distillation boils below 100 °C
Close boiling points need a fractionating column
Reduced pressure is for liquids that would break down
Concept 3 of 4: Lassaigne's test
Definition
- Sodium fusion converts the elements from the covalent form to the ionic form: ; ; .
- If nitrogen and sulphur are both present, sodium thiocyanate, NaSCN, can form. It gives a blood red colour with and no Prussian blue, because there are no free cyanide ions.
- Before testing for halogens, the extract is boiled with nitric acid to break down any NaCN and , which would otherwise react with too.
- Phosphorus: the compound is heated with an oxidising agent (sodium peroxide) to turn phosphorus into phosphate, which gives a yellow precipitate with nitric acid and ammonium molybdate.
- Carbon and hydrogen are detected separately, by heating the compound with copper(II) oxide: carbon gives , which turns lime water milky, and hydrogen gives water, which turns anhydrous copper sulphate blue. This is not part of Lassaigne's test.
| Element | Present in the extract as | Test | Positive result |
|---|---|---|---|
| Nitrogen | NaCN | Boil with , then acidify with concentrated | Prussian blue, |
| Sulphur | Acidify with acetic acid, add lead acetate | Black precipitate of PbS | |
| Sulphur | Sodium nitroprusside | Violet colour, | |
| Nitrogen and sulphur together | NaSCN | Blood red colour, NEET 2023: the blood red colour is due to . | |
| Halogens | NaX | Boil with , then add | White (Cl, soluble in ammonia), pale yellow (Br, sparingly soluble), yellow (I, insoluble) |
| Phosphorus | Phosphate, after heating with | Boil with , add ammonium molybdate | Yellow ammonium phosphomolybdate |
Practise this conceptself-check · 4 quick reps
The same idea in a real exam question:
Example 3 · Organic Chemistry – Some Basic Principles and Techniques · Purification and Analysis
Fusion makes ions out of covalent atoms
Nitrogen with sulphur gives blood red, not Prussian blue
Use nitric acid, not hydrochloric acid
The copper oxide test is not Lassaigne's test
Concept 4 of 4: Estimating the elements
Definition
- Carbon and hydrogen: a weighed sample is burnt with copper(II) oxide. The water is absorbed in a U-tube of anhydrous , the in a U-tube of concentrated KOH. Carbon is 12/44 of the and hydrogen 2/18 of the water.
- Nitrogen, Dumas method: the compound is heated with CuO in an atmosphere of . Its nitrogen comes off as ; any oxides of nitrogen are reduced over a heated copper gauze; the gas is collected over KOH solution, which absorbs the . 22400 mL of at STP weighs 28 g.
- Nitrogen, Kjeldahl method: the compound is heated with concentrated , turning its nitrogen into . NaOH sets free , which is absorbed in a known volume of standard acid. Each takes up two , and each carries one N (14 g mol⁻¹).
- Kjeldahl's method does not work for nitrogen in nitro groups, azo groups or a ring (pyridine), because that nitrogen does not change into ammonium sulphate.
- Halogens, Carius method: heated with fuming and in a sealed Carius tube; the silver halide is weighed (AgCl 143.5, AgBr 188, AgI 235).
- Sulphur: heated with fuming or sodium peroxide in a Carius tube to give , then precipitated by as (233): sulphur is 32/233 of it.
- Oxygen is found by difference: 100 minus the sum of all the other percentages.
Percentage of an element
- mass of the organic compound taken, in g
- volume of nitrogen gas at STP, in mL (Dumas method)
Worked example
Practise this conceptself-check · 4 quick reps
The same idea in a real exam question:
Example 4 · Organic Chemistry – Some Basic Principles and Techniques · Purification and Analysis
Hydrogen is 2/18 of water, not 1/18
Kjeldahl fails for nitro, azo and ring nitrogen
Nitrogen gas is 28 g per 22400 mL
Oxygen is never weighed
Summary — formulas & gotchas at a glance
A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.
Formulas (1)
- Estimating the elements
Percentage of an element
Reference tables (3)
Sublimation, crystallisation, extraction and chromatography5 rows
| Method | Based on | Used for |
|---|---|---|
| Sublimation | A solid going straight to vapour on heating | A solid that sublimes, freed from one that does not NEET 2024 described the principle (solid to vapour without becoming liquid) and asked for the name of the method. |
| Crystallisation | Different solubilities of compound and impurity in a solvent | Purifying a solid |
| Differential extraction | The compound dissolving better in an organic solvent than in water | Taking a compound out of an aqueous solution |
| Column and thin layer chromatography | Different adsorption on alumina or silica gel | Separating the parts of a mixture |
| Paper chromatography | Different partition between the water in the paper and the solvent | Separating small amounts, such as dyes or amino acids |
Choosing a distillation method4 rows
| Method | When to use it | Example |
|---|---|---|
| Simple distillation | Boiling points far apart | Chloroform (334 K) from aniline (457 K) |
| Fractional distillation | Boiling points close together | The fractions of crude oil in the petroleum industry NEET 2026: the o- and p-nitrotoluene made by nitrating toluene were separated by fractional distillation. |
| Distillation under reduced pressure | The liquid decomposes at or below its boiling point | Glycerol from spent-lye in the soap industry |
| Steam distillation | Steam volatile and does not mix with water | Aniline from a mixture of aniline and water Re-NEET 2024: a compound boiling at 250 °C, steam distilled, comes over close to but below 100 °C. |
Lassaigne's test6 rows
| Element | Present in the extract as | Test | Positive result |
|---|---|---|---|
| Nitrogen | NaCN | Boil with , then acidify with concentrated | Prussian blue, |
| Sulphur | Acidify with acetic acid, add lead acetate | Black precipitate of PbS | |
| Sulphur | Sodium nitroprusside | Violet colour, | |
| Nitrogen and sulphur together | NaSCN | Blood red colour, NEET 2023: the blood red colour is due to . | |
| Halogens | NaX | Boil with , then add | White (Cl, soluble in ammonia), pale yellow (Br, sparingly soluble), yellow (I, insoluble) |
| Phosphorus | Phosphate, after heating with | Boil with , add ammonium molybdate | Yellow ammonium phosphomolybdate |
Watch out for (14)
- Sublimation skips the liquid state→ Sublimation, crystallisation, extraction and chromatography
- An value cannot be more than 1→ Sublimation, crystallisation, extraction and chromatography
- Paper chromatography is partition, not adsorption→ Sublimation, crystallisation, extraction and chromatography
- Steam distillation boils below 100 °C→ Choosing a distillation method
- Close boiling points need a fractionating column→ Choosing a distillation method
- Reduced pressure is for liquids that would break down→ Choosing a distillation method
- Fusion makes ions out of covalent atoms→ Lassaigne's test
- Nitrogen with sulphur gives blood red, not Prussian blue→ Lassaigne's test
- Use nitric acid, not hydrochloric acid→ Lassaigne's test
- The copper oxide test is not Lassaigne's test→ Lassaigne's test
- Hydrogen is 2/18 of water, not 1/18→ Estimating the elements
- Kjeldahl fails for nitro, azo and ring nitrogen→ Estimating the elements
- Nitrogen gas is 28 g per 22400 mL→ Estimating the elements
- Oxygen is never weighed→ Estimating the elements
Test yourself on a real paper
Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.