PYQ Vault

NEET Chemistry · The p-Block Elements

Boron and Carbon Families

Groups 13 and 14: the inert pair effect and boron's covalency of four, diborane and the electron-deficient halides of boron and aluminium, and carbon's multiple bonds, catenation and allotropes.

Why this matters

Seven NEET questions from 2022 to 2026. Two are on group 13 trends: which of thallium's iodides is more stable (2023) and boron's maximum covalency of four (Re-NEET 2026). One picks the false statement about diborane (2022), and one asks the ratio of K⁺ to SO₄²⁻ ions in potash alum (Re-NEET 2026). Three are on carbon: the hybridisation of diamond and graphite (2022), a match of coke, diamond, fullerene and graphite with their uses and structures (2023), and an incorrect-statement question on carbon's multiple bonds, catenation and the dimer of aluminium chloride (2026).

Concept 1 of 3: Group 13: oxidation states, the inert pair effect and covalency

Boron, aluminium, gallium, indium and thallium all have three outer electrons (ns² np¹), so +3 is the oxidation state you expect. Down the group, though, the two s electrons hold on more and more tightly and stay out of bonding. Only the single p electron is used, and the +1 state becomes more stable. By thallium, +1 is the normal state and Tl³⁺ is a strong oxidising agent. Boron, at the top, is small and has only four outer orbitals, which limits how many bonds it can form.

Definition

  • Outer configuration: ns2np1ns^2 np^1. Boron and aluminium show +3.
  • Inert pair effect: in Ga, In and Tl both +1 and +3 are seen. The stability of +1 rises down the group: Al < Ga < In < Tl. In thallium +1 is the main state, and Tl(III) compounds are strong oxidising agents.
  • The cause: the d and f electrons of the heavier atoms shield the nucleus poorly, so the ns2ns^2 pair is held tightly and does not take part in bonding.
  • Covalency: boron has only four outer orbitals (one 2s and three 2p) and no d orbitals, so its maximum covalency is 4, as in [BF4]−[\text{BF}_4]^-. Aluminium and the heavier members have d orbitals and can reach a covalency of 6.
  • Size: gallium's atomic radius is a little smaller than aluminium's, because its ten 3d electrons shield poorly.
ElementOxidation states seenWhat to remember
Boron, B+3Non-metal; covalency at most 4, since it has no d orbitalsQ
Re-NEET 2026: boron has a maximum covalency of four.
Aluminium, Al+3Metal; can use d orbitals and reach a covalency of 6
Gallium, Ga+1 and +3Slightly smaller atom than aluminium
Indium, In+1 and +3+1 more stable than in gallium
Thallium, Tl+1 and +3+1 is the main state; Tl³⁺ is a strong oxidising agent
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2026 · Re-NEET (UG) 2026 — 21 Jun 2026 · Q73Moderate

Example 1 · The p-Block Elements · Boron and Carbon Families

The correct statement is

Down the group, +1 gets more stable

The inert pair effect grows from Al to Tl. So for thallium the +1 compound is the stable one: TlI is more stable than TlI3\text{TlI}_3, and TlCl\text{TlCl} more stable than TlCl3\text{TlCl}_3.

Boron stops at four bonds

Boron has four outer orbitals and no d orbitals, so it can never form more than four bonds. A covalency of six belongs to aluminium and the heavier members.

Concept 2 of 3: Diborane, boric acid and the halides of boron and aluminium

A boron or aluminium atom with three bonds has only six electrons around it, two short of an octet. Its compounds keep trying to fix that. Boron trifluoride grabs a lone pair from ammonia. Aluminium chloride pairs up into a dimer. Diborane, B2H6\text{B}_2\text{H}_6, does not have enough electrons for ordinary bonds everywhere, so two hydrogens act as bridges, each bridge holding three atoms together with one pair of electrons.

Definition

  • Diborane B2H6\text{B}_2\text{H}_6: each boron is sp3sp^3 hybridised. The four terminal hydrogens and the two borons lie in one plane, and the four terminal B-H bonds are ordinary two-centre two-electron bonds.
  • The two bridging hydrogens sit above and below that plane. Each B-H-B bridge is a three-centre two-electron (3c-2e) bond, a banana bond: diborane has two of them. The bridging B-H bonds are longer than the terminal ones.
  • Diborane burns in oxygen with a lot of heat: B2H6+3O2→B2O3+3H2O\text{B}_2\text{H}_6 + 3\text{O}_2 \rightarrow \text{B}_2\text{O}_3 + 3\text{H}_2\text{O}. Water hydrolyses it: B2H6+6H2O→2B(OH)3+6H2\text{B}_2\text{H}_6 + 6\text{H}_2\text{O} \rightarrow 2\text{B(OH)}_3 + 6\text{H}_2.
  • Boron trihalides are electron deficient and act as Lewis acids: BF3\text{BF}_3 easily takes the lone pair of NH3\text{NH}_3.
  • Aluminium chloride gains stability by forming the dimer Al2Cl6\text{Al}_2\text{Cl}_6, in which a chlorine of each unit gives a lone pair to the aluminium of the other. Boron trichloride stays a monomer.
  • Alums are double salts such as potash alum, K2SO4⋅Al2(SO4)3⋅24H2O\text{K}_2\text{SO}_4\cdot\text{Al}_2(\text{SO}_4)_3\cdot 24\text{H}_2\text{O}. One formula unit holds 2 K+\text{K}^+, 2 Al3+\text{Al}^{3+} and 4 SO42−\text{SO}_4^{2-}, so K+:SO42−=1:2\text{K}^+ : \text{SO}_4^{2-} = 1 : 2.
  • Boric acid B(OH)3\text{B(OH)}_3 is a weak monobasic acid. It is not a proton donor: it accepts a hydroxide ion, B(OH)3+2H2O→[B(OH)4]−+H3O+\text{B(OH)}_3 + 2\text{H}_2\text{O} \rightarrow [\text{B(OH)}_4]^- + \text{H}_3\text{O}^+, so it is a Lewis acid.
CompoundStructureBehaviour
B2H6\text{B}_2\text{H}_6Each B is sp³; four terminal B-H bonds in one plane, two B-H-B bridges above and below itTwo 3c-2e bridge bonds; burns in air, hydrolysed by water to boric acidQ
NEET 2022: the false statement was that both borons are sp² hybridised.
BF3\text{BF}_3, BCl3\text{BCl}_3Trigonal planar, B is sp²; six electrons around BLewis acids; take a lone pair from NH3\text{NH}_3
AlCl3\text{AlCl}_3Exists as the dimer Al2Cl6\text{Al}_2\text{Cl}_6Electron deficient as a monomer; a Lewis acid
B(OH)3\text{B(OH)}_3Planar BO3\text{BO}_3 units joined by hydrogen bonds into layersWeak monobasic Lewis acid: accepts OH−\text{OH}^-
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2022 · NEET (UG) 2022 — 17 Jul 2022 · Q61Moderate

Example 2 · The p-Block Elements · Boron and Carbon Families

Which of the following statement is not correct about diborane?

Diborane's boron is sp³

Each boron in B2H6\text{B}_2\text{H}_6 uses sp3sp^3 hybrid orbitals: two for terminal hydrogens and two for the bridges. The sp2sp^2 boron belongs to BF3\text{BF}_3 and BCl3\text{BCl}_3.

Two banana bonds, and not all hydrogens in one plane

Diborane has four bridging B-H links but only two 3c-2e bonds. The two bridging hydrogens lie above and below the plane of the other four hydrogens, and their bonds are longer and weaker than the terminal ones.

Boric acid does not give up a proton

B(OH)3\text{B(OH)}_3 is acidic because it accepts OH−\text{OH}^- from water, releasing H3O+\text{H}_3\text{O}^+. It is a monobasic Lewis acid, not a tribasic protonic one.

Concept 3 of 3: Carbon: multiple bonds, catenation and allotropes

Carbon is small and fairly electronegative, so it forms strong bonds to itself, long chains and rings (catenation), and double and triple bonds by side-on overlap of p orbitals. Its heavier cousins cannot do this as well. Carbon's pure forms differ only in how the atoms are joined: four bonds each in a rigid 3D network makes diamond, three bonds each in flat layers makes graphite, and a closed cage makes fullerene.

Definition

  • Multiple bonds: carbon forms pπp\pi-pπp\pi multiple bonds with itself (C=C, C≡C) and with nitrogen and oxygen. The heavier members of group 14 do not.
  • Catenation: strongest in carbon and falls sharply down the group, C >> Si > Ge ≈ Sn. Lead shows none.
  • Diamond: each carbon sp3sp^3, joined to four others tetrahedrally in a rigid three-dimensional network. The hardest natural substance; used as an abrasive, to make dies and as a gem.
  • Graphite: each carbon sp2sp^2, joined to three others in flat layers of hexagonal rings. The layers are held by weak van der Waals forces, so they slide: graphite is soft and slippery and is a dry lubricant. The fourth electron of each carbon is free to move, so graphite conducts electricity along the layers.
  • Fullerene C60\text{C}_{60} (buckminsterfullerene): a cage-like molecule of 20 six-membered and 12 five-membered rings, all carbons sp2sp^2. It is the only pure form of carbon, since it has no dangling bonds.
  • Coke, charcoal and carbon black are impure forms of graphite or fullerenes.
  • Silicates are built from SiO44−\text{SiO}_4^{4-} tetrahedra, joined at their corners by sharing 1, 2, 3 or 4 oxygen atoms per unit.
Form of carbonStructureRemember it for
Diamondsp³ carbon, each bonded to four others in a 3D networkHardest natural substance; abrasive, dies, jewellery
Graphitesp² carbon in flat hexagonal layers held by weak van der Waals forcesDry lubricant; conducts electricity along the layers
Fullerene, C₆₀sp² carbon in a closed cage of 20 six-membered and 12 five-membered ringsCage-like molecule; the pure form of carbon
CokeImpure, amorphous formFuel, and the reducing agent in metallurgyQ
NEET 2023: coke was matched with 'used as a reducing agent' and fullerene with 'cage like molecules'.
Charcoal and carbon blackImpure, amorphous formsCharcoal adsorbs gases; carbon black makes black ink
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2023 · NEET (UG) 2023 — 07 May 2023 · Q77Moderate

Example 3 · The p-Block Elements · Boron and Carbon Families

Match List-I with List-II.
List-IList-II
A. CokeI. Carbon atoms are sp3sp^3 hybridised
B. DiamondII. Used as a dry lubricant
C. FullereneIII. Used as a reducing agent
D. GraphiteIV. Cage like molecules
Choose the correct answer from the options given below:

Graphite is layered, not a 3D network

Diamond is the three-dimensional network. Graphite is flat sheets stacked loosely, which is exactly why it is soft and works as a lubricant.

Only diamond is sp³

Diamond's carbons are sp3sp^3; graphite's and fullerene's are sp2sp^2.

Only carbon makes pπ-pπ bonds in group 14

Silicon and the heavier members do not form pπp\pi-pπp\pi multiple bonds: their p orbitals are too large and diffuse to overlap side on. Their catenation is much weaker too: C >> Si > Ge ≈ Sn.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Reference tables (3)

Group 13: oxidation states, the inert pair effect and covalency5 rows
ElementOxidation states seenWhat to remember
Boron, B+3Non-metal; covalency at most 4, since it has no d orbitalsQ
Re-NEET 2026: boron has a maximum covalency of four.
Aluminium, Al+3Metal; can use d orbitals and reach a covalency of 6
Gallium, Ga+1 and +3Slightly smaller atom than aluminium
Indium, In+1 and +3+1 more stable than in gallium
Thallium, Tl+1 and +3+1 is the main state; Tl³⁺ is a strong oxidising agent
Diborane, boric acid and the halides of boron and aluminium4 rows
CompoundStructureBehaviour
B2H6\text{B}_2\text{H}_6Each B is sp³; four terminal B-H bonds in one plane, two B-H-B bridges above and below itTwo 3c-2e bridge bonds; burns in air, hydrolysed by water to boric acidQ
NEET 2022: the false statement was that both borons are sp² hybridised.
BF3\text{BF}_3, BCl3\text{BCl}_3Trigonal planar, B is sp²; six electrons around BLewis acids; take a lone pair from NH3\text{NH}_3
AlCl3\text{AlCl}_3Exists as the dimer Al2Cl6\text{Al}_2\text{Cl}_6Electron deficient as a monomer; a Lewis acid
B(OH)3\text{B(OH)}_3Planar BO3\text{BO}_3 units joined by hydrogen bonds into layersWeak monobasic Lewis acid: accepts OH−\text{OH}^-
Carbon: multiple bonds, catenation and allotropes5 rows
Form of carbonStructureRemember it for
Diamondsp³ carbon, each bonded to four others in a 3D networkHardest natural substance; abrasive, dies, jewellery
Graphitesp² carbon in flat hexagonal layers held by weak van der Waals forcesDry lubricant; conducts electricity along the layers
Fullerene, C₆₀sp² carbon in a closed cage of 20 six-membered and 12 five-membered ringsCage-like molecule; the pure form of carbon
CokeImpure, amorphous formFuel, and the reducing agent in metallurgyQ
NEET 2023: coke was matched with 'used as a reducing agent' and fullerene with 'cage like molecules'.
Charcoal and carbon blackImpure, amorphous formsCharcoal adsorbs gases; carbon black makes black ink

Watch out for (8)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper