PYQ Vault

NEET Chemistry · The p-Block Elements

Oxygen Family

Group 16: the elements and their oxidation states, the hydrides H₂O to H₂Te with their boiling points and acid strengths, and the oxoacids of sulphur with the dilute-acid tests for anions.

Why this matters

Six NEET questions from 2021 to 2024. Three are on the hydrides H₂O to H₂Te: two on their boiling points (2022 and 2024) and one on their pKa values (2021). One asks which element of the group does not show the −2 state (2024), one matches four oxoacids of sulphur to their bonds (2023, the chapter's only HARD question), and one matches the gas each anion gives with dilute sulphuric acid (Re-NEET 2024).

Concept 1 of 3: Group 16 elements and their oxidation states

Oxygen, sulphur, selenium, tellurium and polonium all have six outer electrons (ns² np⁴), two short of a noble gas, so −2 is the state you expect. Oxygen, small and very electronegative, mostly stays at −2. The others also use their outer electrons to reach +2, +4 and +6 when bonded to oxygen or fluorine. Down the group the metallic character grows and the −2 state fades: polonium, a metal, hardly shows it at all.

Definition

  • Nature: oxygen and sulphur are non-metals, selenium and tellurium metalloids, polonium a radioactive metal.
  • Oxygen: mostly −2. It is −1 in peroxides such as H2O2\text{H}_2\text{O}_2, +1 in O2F2\text{O}_2\text{F}_2 and +2 in OF2\text{OF}_2, where it is bonded to the more electronegative fluorine.
  • S, Se, Te: −2, +2, +4 and +6; +4 and +6 are the common ones, with oxygen and fluorine.
  • Down the group the stability of −2 falls (polonium hardly shows it), and +4 becomes more stable than +6 (inert pair effect).
  • Oxygen is the odd one out: it is a diatomic gas, O2\text{O}_2, held by a pπp\pi-pπp\pi double bond, while sulphur is a solid of S8\text{S}_8 rings. Its covalency is limited to 4, since it has no d orbitals.
  • Oxygen's electron gain enthalpy is less negative than sulphur's, because the small oxygen atom is crowded with electrons.
  • Dioxygen, O2\text{O}_2, is paramagnetic.
ElementNatureMain oxidation states
Oxygen, ONon-metal; gas, O₂−2; also −1 in peroxides, +1 in O₂F₂, +2 in OF₂
Sulphur, SNon-metal; solid, S₈−2, +2, +4, +6
Selenium, SeMetalloid−2, +2, +4, +6
Tellurium, TeMetalloid−2, +2, +4, +6
Polonium, PoRadioactive metal+2 and +4; hardly ever −2Q
NEET 2024: polonium was the group 16 element that does not show −2.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2024 · NEET (UG) 2024 — 05 May 2024 · Q62Easy

Example 1 · The p-Block Elements · Oxygen Family

Among Group 16 elements, which one does NOT show −2-2 oxidation state?

Oxygen is not always −2

Oxygen is −1 in peroxides, +1 in O2F2\text{O}_2\text{F}_2 and +2 in OF2\text{OF}_2. A statement that oxygen shows only −2 is false.

Polonium hardly shows −2

The −2 state gets less stable down the group. O, S, Se and Te all show it; polonium, a metal, hardly ever does.

Sulphur beats oxygen in electron gain enthalpy

Oxygen is more electronegative, yet its electron gain enthalpy is less negative than sulphur's, because an added electron is crowded in oxygen's small 2p shell.

Concept 2 of 3: Hydrides of group 16: boiling point and acid strength

Two different rules decide the properties of H₂O, H₂S, H₂Se and H₂Te. Acid strength follows the H-E bond: it gets longer and weaker down the group, so it breaks more easily and the acid gets stronger. Boiling point follows the forces between molecules: they grow with molar mass from H₂S to H₂Te, but water breaks the pattern because its molecules are held together by hydrogen bonds. So water, the lightest, boils highest.

Definition

  • Acid strength rises down the group: H2O<H2S<H2Se<H2Te\text{H}_2\text{O} < \text{H}_2\text{S} < \text{H}_2\text{Se} < \text{H}_2\text{Te}, because the H-E bond enthalpy falls. A stronger acid has a lower pKa\text{p}K_a, so pKa\text{p}K_a falls in the same order.
  • Reducing power rises from H2S\text{H}_2\text{S} to H2Te\text{H}_2\text{Te}; thermal stability falls.
  • Boiling point: H2O>H2Te>H2Se>H2S\text{H}_2\text{O} > \text{H}_2\text{Te} > \text{H}_2\text{Se} > \text{H}_2\text{S}. From H2S\text{H}_2\text{S} to H2Te\text{H}_2\text{Te} it rises with molar mass; water is far higher because of intermolecular hydrogen bonding.
  • The H-E-H bond angle falls from 104° in water to about 90° in H2Te\text{H}_2\text{Te}.
HydrideBoiling point (K)H-E bond enthalpy (kJ/mol)Acid dissociation constant
H2O\text{H}_2\text{O}3734631.8×10−161.8 \times 10^{-16}Q
NEET 2024: the order H₂O > H₂Te > H₂Se > H₂S was correct, and so was the hydrogen-bond reason.
H2S\text{H}_2\text{S}2133471.3×10−71.3 \times 10^{-7}
H2Se\text{H}_2\text{Se}2322761.3×10−41.3 \times 10^{-4}
H2Te\text{H}_2\text{Te}2692382.3×10−32.3 \times 10^{-3}
Down the table the bond gets weaker and the acid stronger, while the boiling point dips at H₂S and then climbs.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2024 · NEET (UG) 2024 — 05 May 2024 · Q69Easy

Example 2 · The p-Block Elements · Oxygen Family

Given below are two statements: Statement I: The boiling point of hydrides of Group 16 elements follow the order H2O>H2Te>H2Se>H2SH_2O > H_2Te > H_2Se > H_2S. Statement II: On the basis of molecular mass, H2OH_2O is expected to have lower boiling point than the other members of the group but due to the presence of extensive H-bonding in H2OH_2O, it has higher boiling point. In the light of the above statements, choose the correct answer from the options given below:

Boiling point does not simply follow molar mass

H2S\text{H}_2\text{S}, H2Se\text{H}_2\text{Se} and H2Te\text{H}_2\text{Te} rise with molar mass, but water, the lightest, boils highest because of hydrogen bonding. The order is H2O>H2Te>H2Se>H2S\text{H}_2\text{O} > \text{H}_2\text{Te} > \text{H}_2\text{Se} > \text{H}_2\text{S}.

Stronger acid, lower pKa

Acid strength rises from H2O\text{H}_2\text{O} to H2Te\text{H}_2\text{Te}, so the pKa\text{p}K_a values fall in that order. An order of increasing pKa\text{p}K_a from H2O\text{H}_2\text{O} to H2Te\text{H}_2\text{Te} is wrong.

Concept 3 of 3: Oxoacids of sulphur and the tests for anions

Each sulphur oxoacid is built from sulphur atoms carrying S=O and S-OH groups. One sulphur gives sulphurous or sulphuric acid. Two sulphur units can be joined by a single oxygen (S-O-S) or by two oxygens in a row (S-O-O-S, a peroxo link). Read the name: 'pyro' means two units joined by one oxygen, 'peroxo' means the O-O link. Separately, several anions can be told apart by the gas they give off with dilute sulphuric acid.

Definition

  • Sulphuric acid is made by the contact process: 2SO2+O2⇌2SO32\text{SO}_2 + \text{O}_2 \rightleftharpoons 2\text{SO}_3 over V2O5\text{V}_2\text{O}_5. The SO3\text{SO}_3 is absorbed in sulphuric acid to give oleum, H2S2O7\text{H}_2\text{S}_2\text{O}_7, which is diluted to the required strength.
  • Oxidation states: S is +4 in sulphurous acid and +6 in the other three acids below. In peroxodisulphuric acid the two peroxo oxygens are −1 each, so sulphur is still +6.
  • Tests with dilute H2SO4\text{H}_2\text{SO}_4:
  • Carbonate gives brisk effervescence of colourless, odourless CO2\text{CO}_2, which turns lime water milky.
  • Sulphide gives H2S\text{H}_2\text{S}, smelling of rotten eggs, which turns lead acetate paper black.
  • Sulphite gives SO2\text{SO}_2, with a pungent smell, which turns acidified potassium dichromate paper green.
  • Nitrite gives brown fumes of NO2\text{NO}_2.
AcidFormulaOxidation state of SBonds in one molecule
Sulphurous acidH2SO3\text{H}_2\text{SO}_3+4Two S-OH, one S=O
Sulphuric acidH2SO4\text{H}_2\text{SO}_4+6Two S-OH, two S=O
Pyrosulphuric acid (oleum)H2S2O7\text{H}_2\text{S}_2\text{O}_7+6Two S-OH, four S=O, one S-O-S bridge
Peroxodisulphuric acidH2S2O8\text{H}_2\text{S}_2\text{O}_8+6Two S-OH, four S=O, one S-O-O-S bridgeQ
NEET 2023: all four acids were matched to these bond counts.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2023 · NEET (UG) 2023 — 07 May 2023 · Q90Hard

Example 3 · The p-Block Elements · Oxygen Family

Match List-I with List-II:
List-I (Oxoacids of Sulphur)List-II (Bonds)
A. Peroxodisulphuric acidI. Two S-OH, Four S=O, One S-O-S
B. Sulphuric acidII. Two S-OH, One S=O
C. Pyrosulphuric acidIII. Two S-OH, Four S=O, One S-O-O-S
D. Sulphurous acidIV. Two S-OH, Two S=O
Choose the correct answer from the options given below:

Pyro has S-O-S, peroxo has S-O-O-S

Pyrosulphuric acid H2S2O7\text{H}_2\text{S}_2\text{O}_7 joins its two units through one oxygen. Peroxodisulphuric acid H2S2O8\text{H}_2\text{S}_2\text{O}_8 joins them through an O-O link, the one extra oxygen.

Sulphur in H₂S₂O₈ is +6, not +7

Counting every oxygen as −2 gives +7, which sulphur cannot reach. The two peroxo oxygens are −1 each, so sulphur is +6.

Rotten eggs means sulphide, pungent means sulphite

A sulphide gives H2S\text{H}_2\text{S} (rotten eggs); a sulphite gives SO2\text{SO}_2 (pungent). Brown fumes come from a nitrite, a colourless odourless gas from a carbonate.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Reference tables (3)

Group 16 elements and their oxidation states5 rows
ElementNatureMain oxidation states
Oxygen, ONon-metal; gas, O₂−2; also −1 in peroxides, +1 in O₂F₂, +2 in OF₂
Sulphur, SNon-metal; solid, S₈−2, +2, +4, +6
Selenium, SeMetalloid−2, +2, +4, +6
Tellurium, TeMetalloid−2, +2, +4, +6
Polonium, PoRadioactive metal+2 and +4; hardly ever −2Q
NEET 2024: polonium was the group 16 element that does not show −2.
Hydrides of group 16: boiling point and acid strength4 rows
HydrideBoiling point (K)H-E bond enthalpy (kJ/mol)Acid dissociation constant
H2O\text{H}_2\text{O}3734631.8×10−161.8 \times 10^{-16}Q
NEET 2024: the order H₂O > H₂Te > H₂Se > H₂S was correct, and so was the hydrogen-bond reason.
H2S\text{H}_2\text{S}2133471.3×10−71.3 \times 10^{-7}
H2Se\text{H}_2\text{Se}2322761.3×10−41.3 \times 10^{-4}
H2Te\text{H}_2\text{Te}2692382.3×10−32.3 \times 10^{-3}
Down the table the bond gets weaker and the acid stronger, while the boiling point dips at H₂S and then climbs.
Oxoacids of sulphur and the tests for anions4 rows
AcidFormulaOxidation state of SBonds in one molecule
Sulphurous acidH2SO3\text{H}_2\text{SO}_3+4Two S-OH, one S=O
Sulphuric acidH2SO4\text{H}_2\text{SO}_4+6Two S-OH, two S=O
Pyrosulphuric acid (oleum)H2S2O7\text{H}_2\text{S}_2\text{O}_7+6Two S-OH, four S=O, one S-O-S bridge
Peroxodisulphuric acidH2S2O8\text{H}_2\text{S}_2\text{O}_8+6Two S-OH, four S=O, one S-O-O-S bridgeQ
NEET 2023: all four acids were matched to these bond counts.

Watch out for (8)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper