PYQ Vault

NEET Chemistry · Solutions

Concentration and Solubility

The types of solutions, the ways of stating how much solute a solution holds (mass percentage, ppm, mole fraction, molarity and molality), and what decides solubility, including Henry's law for gases.

Why this matters

Six NEET questions from 2022 to 2026. One matches humidity, alloys, amalgams and smoke to their types of solution (2025), one finds the mass of solvent in a 1 molal solution holding 0.5 mol of solute (2022), one finds the mass of glucose for 250 mL of an M/20 solution (Re-NEET 2024), one checks five statements on molality, molarity, gas solubility and mole fraction (NEET 2026), one ranks three gases by solubility from their Henry's law constants (NEET 2024), and one ranks NaCl, CH₃OH, cyclohexane and CH₃CN by solubility in chloroform (Re-NEET 2024).

Concept 1 of 3: Types of solutions

A solution is a mixture that is the same all the way through. The component present in the larger amount is the solvent, and it decides whether the solution is a gas, a liquid or a solid. The other component is the solute. Since the solute and the solvent can each be a gas, a liquid or a solid, there are nine types of solution.

Definition

  • A solution is a homogeneous mixture of two or more components. A binary solution has two.
  • The solvent is the component present in the largest amount. It decides the physical state of the solution.
  • The solute is the component (or components) present in a smaller amount.
  • Name a type as "solute in solvent": camphor in nitrogen gas is solid in gas, so it is a gaseous solution.
Type of solutionSolute in solventExample
GaseousGas in gasMixture of oxygen and nitrogen
GaseousLiquid in gasChloroform mixed with nitrogen gas
NEET 2025 counted humidity as a solution of liquid in gas.
GaseousSolid in gasCamphor in nitrogen gas
NEET 2025 counted smoke as a solution of solid in gas.
LiquidGas in liquidOxygen dissolved in water
LiquidLiquid in liquidEthanol dissolved in water
LiquidSolid in liquidGlucose dissolved in water
SolidGas in solidHydrogen in palladium
SolidLiquid in solidAmalgam of mercury with sodium
SolidSolid in solidCopper dissolved in gold (an alloy)
The solvent's state gives the first column; the solute's state comes first in the second.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2025 · NEET (UG) 2025 — 04 May 2025 · Q66Easy

Example 1 · Solutions · Concentration and Solubility

Match List-I with List-II
List-I (Example)List-II (Type of Solution)
A. HumidityI. Solid in solid
B. AlloysII. Liquid in gas
C. AmalgamsIII. Solid in gas
D. SmokeIV. Liquid in solid
Choose the correct answer from the options given below:

The solvent decides the state

Camphor is a solid, but camphor in nitrogen gas is a gaseous solution, because nitrogen is the solvent. Read the solvent first, then the solute.

An amalgam is liquid in solid

In an amalgam of mercury with sodium, liquid mercury is the solute and solid sodium is the solvent. It is a liquid in solid solution, not solid in liquid.

Concept 2 of 3: Concentration terms

Concentration says how much solute there is in a given amount of solution or solvent. Some terms use masses or volumes, which you can weigh or measure. Others use moles, which count particles, and those are the ones the later formulas need. The key difference to remember: molarity divides by the volume of the whole solution, molality by the mass of the solvent alone.

Definition

  • Mass percentage (w/w) = mass of the component ÷ total mass of the solution × 100.
  • Volume percentage (v/v) = volume of the component ÷ total volume of the solution × 100.
  • Mass by volume percentage (w/v) = grams of solute in 100 mL of solution.
  • Parts per million (ppm) = parts of the component ÷ total parts of the solution × 10610^{6}. It is used for very small amounts, such as traces of a gas in water.
  • Mole fraction of B: xB=nBnA+nBx_B = \dfrac{n_B}{n_A + n_B}. The mole fractions of all the components add up to 1.
  • Molarity (M) = moles of solute ÷ volume of solution in litres.
  • Molality (m) = moles of solute ÷ mass of solvent in kilograms.
  • Molarity changes with temperature, because volume changes. Mass percentage, ppm, mole fraction and molality do not.
  • On dilution the moles of solute stay the same: M1V1=M2V2M_1V_1 = M_2V_2.

Mole fraction, molarity and molality

xB=nBnA+nB,M=n2Vsolution (L),m=n2Wsolvent (kg)x_B = \frac{n_B}{n_A + n_B}, \qquad M = \frac{n_2}{V_{\text{solution}}\,(\text{L})}, \qquad m = \frac{n_2}{W_{\text{solvent}}\,(\text{kg})}
  • n2n_2moles of solute, its mass divided by its molar mass
  • VsolutionV_{\text{solution}}volume of the whole solution, in litres
  • WsolventW_{\text{solvent}}mass of the solvent alone, in kilograms

Worked example

6 g of urea (molar mass 60 g/mol) is dissolved in 200 g of water (molar mass 18 g/mol). Find the molality of the solution and the mole fraction of urea.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2024 · Re-NEET (UG) 2024 — 23 Jun 2024 · Q70Moderate

Example 2 · Solutions · Concentration and Solubility

The amount of glucose required to prepare 250 mL of M20\dfrac{M}{20} aqueous solution is : (Molar mass of glucose : 180 g mol−1180\ g\ mol^{-1})

Molality divides by the solvent, not the solution

Molality uses the mass of the solvent alone, in kilograms. Adding the solute's mass to it, or using grams, gives a wrong value.

Molarity needs litres of solution

Molarity divides by the volume of the whole solution in litres. For 250 mL, divide by 0.25 L, not by 250.

The mole fraction of B has B on top

xB=nBnA+nBx_B = \dfrac{n_B}{n_A + n_B}. Putting nAn_A on top gives the mole fraction of A instead.

Concept 3 of 3: Solubility and Henry's law

How much of a substance dissolves depends on the solute, the solvent, the temperature and, for a gas, the pressure. A solute dissolves best in a solvent with similar forces between its molecules: like dissolves like. For a gas, pressing harder on the gas above the liquid pushes more of it into solution. Warming does the opposite and drives gas out.

Definition

  • Like dissolves like: polar and ionic solutes dissolve in polar solvents; non-polar solutes dissolve in non-polar solvents. Sodium chloride and sugar dissolve readily in water; naphthalene and anthracene dissolve readily in benzene.
  • For a solid in a liquid, pressure has no significant effect, because solids and liquids are hardly compressed.
  • For a gas in a liquid, solubility rises with pressure. Henry's law: the partial pressure of the gas in the vapour phase is proportional to its mole fraction in the solution, p=KHxp = K_H x.
  • At a given pressure, the higher KHK_H, the lower the solubility of the gas.
  • KHK_H rises with temperature, so a gas is less soluble in warm water. This is why aquatic species are more comfortable in cold water than in warm water.
  • Uses of Henry's law: soft drinks are sealed under high pressure to dissolve more CO2\text{CO}_2; scuba divers breathing air at high pressure get more nitrogen dissolved in the blood, which forms bubbles (the bends) when they rise, so their tanks use air diluted with helium; at high altitude the low partial pressure of oxygen leaves less oxygen in the blood (anoxia).

Henry's law

p=KH xp = K_H\,x
  • pppartial pressure of the gas above the solution
  • xxmole fraction of the gas in the solution
  • KHK_HHenry's law constant, different for each gas and rising with temperature

Worked example

The Henry's law constant of a gas in water is 50 kbar at 298 K. Find the mole fraction of the gas in water when its partial pressure is 0.5 bar.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2024 · NEET (UG) 2024 — 05 May 2024 · Q67Moderate

Example 3 · Solutions · Concentration and Solubility

The Henry's law constant (KH)(K_H) values of three gases (A, B, C) in water are 145, 2×10−52 \times 10^{-5} and 35 kbar, respectively. The solubility of these gases in water follow the order:

A larger KH means a less soluble gas

From x=pKHx = \dfrac{p}{K_H}, a gas with a larger KHK_H dissolves less at the same pressure. Ranking solubility in the same order as KHK_H gets it backwards.

Gases dissolve less when it is warmer

KHK_H rises with temperature, so a gas becomes less soluble as water warms. Lower pressure also lowers gas solubility; it never raises it.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (2)

  • Concentration terms

    Mole fraction, molarity and molality

    xB=nBnA+nB,M=n2Vsolution (L),m=n2Wsolvent (kg)x_B = \frac{n_B}{n_A + n_B}, \qquad M = \frac{n_2}{V_{\text{solution}}\,(\text{L})}, \qquad m = \frac{n_2}{W_{\text{solvent}}\,(\text{kg})}
  • Solubility and Henry's law

    Henry's law

    p=KH xp = K_H\,x

Reference tables (1)

Types of solutions9 rows
Type of solutionSolute in solventExample
GaseousGas in gasMixture of oxygen and nitrogen
GaseousLiquid in gasChloroform mixed with nitrogen gas
NEET 2025 counted humidity as a solution of liquid in gas.
GaseousSolid in gasCamphor in nitrogen gas
NEET 2025 counted smoke as a solution of solid in gas.
LiquidGas in liquidOxygen dissolved in water
LiquidLiquid in liquidEthanol dissolved in water
LiquidSolid in liquidGlucose dissolved in water
SolidGas in solidHydrogen in palladium
SolidLiquid in solidAmalgam of mercury with sodium
SolidSolid in solidCopper dissolved in gold (an alloy)
The solvent's state gives the first column; the solute's state comes first in the second.

Watch out for (7)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper