PYQ Vault

NEET Physics · Alternating Current

AC Values and Reactance

An alternating current as a sine wave with a peak and an rms value, and how a pure inductor and a pure capacitor oppose it: reactance ωL and 1/ωC, each with the current a quarter cycle out of step with the voltage.

Why this matters

Five NEET questions from 2022 to 2026. Two are about the sine wave itself (the peak as √2 times the rms value in 2022, the time from zero to the peak in 2026), one writes the voltage across an inductor from its current (Re-NEET 2024) and two are about a capacitor: its peak current from the supply in NEET 2024, and what happens to its current when the frequency drops in 2023.

Concept 1 of 3: Peak, rms and instantaneous values

The mains does not push current one way. It pushes it forward, then back, fifty times a second, in the shape of a sine wave. The largest value in each swing is the peak. Because the current spends most of its time below the peak, we also use the rms value: the steady current that would heat a resistor just as much. Every meter reading and every rating such as 220 V is an rms value.

Definition

  • Instantaneous current: i=I0sin⁡ωti = I_0\sin\omega t, with ω=2πf\omega = 2\pi f and period T=1fT = \dfrac{1}{f}. The same shape holds for voltage.
  • rms value: Irms=I02≈0.707 I0I_{rms} = \dfrac{I_0}{\sqrt{2}} \approx 0.707\,I_0, and Vrms=V02V_{rms} = \dfrac{V_0}{\sqrt{2}}. So the peak is 2\sqrt{2} times the rms value.
  • ac ammeters and voltmeters read rms values. The 220 V of the mains is an rms value.
  • Over one full cycle the average of a sine current is zero.
  • The current is zero twice in every cycle. It rises from zero to its peak in a quarter of a period, T4\dfrac{T}{4}.

AC values

i=I0sin⁡ωt,ω=2πf,Irms=I02,Vrms=V02i = I_0 \sin \omega t, \qquad \omega = 2\pi f, \qquad I_{rms} = \frac{I_0}{\sqrt{2}}, \qquad V_{rms} = \frac{V_0}{\sqrt{2}}
  • I0I_0peak current
  • ω\omegaangular frequency in rad/s
  • fffrequency in hertz

Worked example

The mains supply in India is 220 V at 50 Hz. Find the peak voltage and write the instantaneous voltage.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2026 · NEET (UG) 2026 — 03 May 2026 · Q38Moderate

Example 1 · Alternating Current · AC Values and Reactance

The peak value of an alternating current is 5 A and frequency is 60 Hz. How long will the current, starting from zero, take to reach the peak value?

Meters and ratings are rms

220 V mains means 220 V rms. Its peak is 2202≈311 V220\sqrt{2} \approx 311\ \text{V}. An ac ammeter or voltmeter always shows the rms value, never the peak.

Zero to peak is a quarter cycle

A sine current rises from zero to its peak in T4\dfrac{T}{4}, not T2\dfrac{T}{2}. At 50 Hz that is 1200\dfrac{1}{200} s, or 5 ms.

Concept 2 of 3: An inductor in an ac circuit

A coil fights any change in the current through it, by the emf it induces in itself. The faster the current changes, the harder the coil fights. So its opposition, the inductive reactance, grows with frequency, and for steady dc it is zero. The voltage across the coil is largest when the current is changing fastest, which is when the current passes through zero. That puts the voltage a quarter cycle ahead of the current.

Definition

  • Inductive reactance: XL=ωL=2πfLX_L = \omega L = 2\pi fL, measured in ohm. For dc, f=0f = 0 and XL=0X_L = 0.
  • Current: Irms=VrmsXLI_{rms} = \dfrac{V_{rms}}{X_L}, or peak with peak: V0=I0XLV_0 = I_0X_L.
  • If i=I0sin⁡ωti = I_0\sin\omega t, the voltage is v=I0ωLsin⁡(ωt+π2)=I0ωLcos⁡ωtv = I_0\omega L\sin\left(\omega t + \dfrac{\pi}{2}\right) = I_0\omega L\cos\omega t.
  • Phase: in a pure inductor the voltage leads the current by π2\dfrac{\pi}{2}, so the current lags.
  • Average power over a cycle is zero: the coil stores energy in its magnetic field and gives it back.

Inductive reactance

XL=ωL=2πfL,V0=I0XLX_L = \omega L = 2\pi f L, \qquad V_0 = I_0 X_L

Worked example

A pure inductor of 0.2 H is connected to a 220 V, 50 Hz supply. Find its reactance and the rms current.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2024 · Re-NEET (UG) 2024 — 23 Jun 2024 · Q10Moderate

Example 2 · Alternating Current · AC Values and Reactance

In the circuit shown below, the inductance LL is connected to an ac source. The current flowing in the circuit is I=I0sin⁡ωtI = I_0\sin\omega t. The voltage drop (VL)(V_L) across LL is

A given ω is already in rad/s

In sin⁡(500t)\sin(500t) or sin⁡(100πt)\sin(100\pi t), the number that multiplies t is ω\omega itself. Use 2πf2\pi f only when the frequency is given in hertz.

In an inductor the voltage leads

The voltage across a pure inductor reaches its peak a quarter cycle before the current does. The current lags the voltage; it does not lead it.

Concept 3 of 3: A capacitor in an ac circuit

On ac a capacitor charges, discharges and charges the other way, every cycle. Charge flows on and off its plates, so a current flows in the wires even though no charge crosses the gap. The faster this happens, the more current flows for the same voltage. So the capacitive reactance falls as the frequency rises, and for steady dc it is infinite. The current is largest when the voltage is changing fastest, so the current is a quarter cycle ahead of the voltage.

Definition

  • Capacitive reactance: XC=1ωC=12πfCX_C = \dfrac{1}{\omega C} = \dfrac{1}{2\pi fC}, in ohm. For dc it is infinite: a capacitor blocks steady current.
  • Current: Irms=VrmsXC=Vrms ωCI_{rms} = \dfrac{V_{rms}}{X_C} = V_{rms}\,\omega C, or peak with peak.
  • If v=V0sin⁡ωtv = V_0\sin\omega t, the current is i=V0ωCsin⁡(ωt+π2)i = V_0\omega C\sin\left(\omega t + \dfrac{\pi}{2}\right).
  • Phase: in a pure capacitor the current leads the voltage by π2\dfrac{\pi}{2}.
  • Between the plates no charge flows, but the changing electric field there gives a displacement current equal to the conduction current in the wires.
  • Average power over a cycle is zero.

Capacitive reactance

XC=1ωC=12πfC,I0=V0ωCX_C = \frac{1}{\omega C} = \frac{1}{2\pi f C}, \qquad I_0 = V_0 \omega C

Worked example

A 20 μF20\ \mu\text{F} capacitor is connected to a 100 V rms source with ω=500\omega = 500 rad/s. Find its reactance, the rms current and the peak current.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2023 · NEET (UG) 2023 — 07 May 2023 · Q2Moderate

Example 3 · Alternating Current · AC Values and Reactance

An ac source is connected to a capacitor CC. Due to decrease in its operating frequency

Capacitive reactance falls with frequency

XC=12πfCX_C = \dfrac{1}{2\pi fC} goes down as f or C goes up. Raising the frequency lets more current through a capacitor, unlike an inductor.

In a capacitor the current leads

In a pure capacitor the current leads the voltage by π2\dfrac{\pi}{2}. A memory aid is CIVIL: in C, I leads V; V leads I in L.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (3)

  • Peak, rms and instantaneous values

    AC values

    i=I0sin⁡ωt,ω=2πf,Irms=I02,Vrms=V02i = I_0 \sin \omega t, \qquad \omega = 2\pi f, \qquad I_{rms} = \frac{I_0}{\sqrt{2}}, \qquad V_{rms} = \frac{V_0}{\sqrt{2}}
  • An inductor in an ac circuit

    Inductive reactance

    XL=ωL=2πfL,V0=I0XLX_L = \omega L = 2\pi f L, \qquad V_0 = I_0 X_L
  • A capacitor in an ac circuit

    Capacitive reactance

    XC=1ωC=12πfC,I0=V0ωCX_C = \frac{1}{\omega C} = \frac{1}{2\pi f C}, \qquad I_0 = V_0 \omega C

Watch out for (6)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper