PYQ Vault

NEET Physics · Electrostatic Potential and Capacitance

Capacitors and Dielectrics

Capacitance C = Q/V and what it depends on, the parallel plate capacitor C = ε₀A/d with a battery kept on or taken off, polar and non-polar molecules, and how a dielectric raises capacitance.

Why this matters

Four NEET questions from 2021 to 2025. Two are about what capacitance depends on: the geometry, not the charge or voltage (Re-NEET 2024), and what changes when the plates of a capacitor joined to a battery are moved closer (2024). Two are about dielectrics: what a polar molecule is (2021), and two slabs that double a capacitance (2025).

Concept 1 of 2: Capacitance and the parallel plate capacitor

A capacitor is two conductors holding equal and opposite charges, +Q and −Q. The more charge you put on, the larger the potential difference between them, in a fixed ratio. That ratio, C = Q/V, is the capacitance. It is set by the shape, size and spacing of the plates and by what fills the gap, never by how much charge happens to be on them.

Definition

  • C=QVC = \dfrac{Q}{V}. Unit: farad, 1 F = 1 C/V. Practical sizes are μF and pF.
  • Parallel plates of area A, gap d, vacuum between: C=ε0AdC = \dfrac{\varepsilon_0 A}{d}, with ε0=8.85×10−12 F/m\varepsilon_0 = 8.85 \times 10^{-12}\ \text{F/m}.
  • Field between the plates: E=σε0=Qε0AE = \dfrac{\sigma}{\varepsilon_0} = \dfrac{Q}{\varepsilon_0 A}, uniform, and V=EdV = Ed.
  • Battery kept on: V stays fixed. Change C and the charge changes, Q=CVQ = CV.
  • Battery taken off: Q stays fixed. Change C and the voltage changes, V=QCV = \dfrac{Q}{C}.

Parallel plate capacitor

C=QV,C=ε0Ad,E=σε0C = \frac{Q}{V}, \qquad C = \frac{\varepsilon_0 A}{d}, \qquad E = \frac{\sigma}{\varepsilon_0}
  • AAarea of each plate
  • ddgap between the plates
  • σ\sigmacharge per unit area on a plate

Worked example

Two plates, each of area 0.02 m², are 1 mm apart in air. Find the capacitance, and the charge it takes from a 100 V battery. (ε0=8.85×10−12\varepsilon_0 = 8.85 \times 10^{-12} F/m)
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2024 · NEET (UG) 2024 — 05 May 2024 · Q48Moderate

Example 1 · Electrostatic Potential and Capacitance · Capacitors and Dielectrics

If the plates of a parallel plate capacitor connected to a battery are moved close to each other, then A. the charge stored in it, increases. B. the energy stored in it, decreases. C. its capacitance increases. D. the ratio of charge to its potential remains the same. E. the product of charge and voltage increases. Choose the most appropriate answer from the options given below:

C does not depend on Q or V

Capacitance depends on the plates, their gap and the medium. Doubling Q doubles V and leaves C the same.

Ask first what stays fixed

With the battery joined, V is fixed and Q follows C. With the battery removed, Q is fixed and V follows C. Mixing these up reverses the answer.

Closer plates, larger capacitance

C=ε0A/dC = \varepsilon_0 A/d, so bringing the plates closer raises C. With a battery joined, the charge and the stored energy both rise too.

Concept 2 of 2: Dielectrics and dielectric constant

A dielectric is an insulator. Put it in a field and its molecules line up a little as dipoles, leaving a thin layer of charge on each face that opposes the field. The field inside drops to E₀/K. Less field means less voltage for the same charge, so the capacitor holds more charge per volt: its capacitance rises.

Definition

  • Polar molecule: the centres of positive and negative charge do not coincide, so it has a permanent dipole moment (water, HCl).
  • Non-polar molecule: the centres coincide, so there is no dipole moment until a field pulls them apart and induces one (O₂, H₂).
  • In a field a dielectric is polarised. The field inside falls to E0K\dfrac{E_0}{K}, where K is the dielectric constant (K = 1 for vacuum, K > 1 for any dielectric).
  • Gap filled completely: C=Kε0Ad=KC0C = \dfrac{K\varepsilon_0 A}{d} = KC_0.
  • A slab of thickness t in a gap d: the field in the slab is E0K\dfrac{E_0}{K}, so V=E0(d−t+tK)V = E_0\left(d - t + \dfrac{t}{K}\right) and C=ε0Ad−t+tKC = \dfrac{\varepsilon_0 A}{d - t + \dfrac{t}{K}}.
  • Several layers across the gap: C=ε0A∑tiKiC = \dfrac{\varepsilon_0 A}{\sum \dfrac{t_i}{K_i}}, counting any air layer with K = 1.

Capacitor with a dielectric

C=KC0 (gap full),C=ε0Ad−t+t/K,C=ε0A∑ti/KiC = KC_0 \ \text{(gap full)}, \qquad C = \frac{\varepsilon_0 A}{d - t + t/K}, \qquad C = \frac{\varepsilon_0 A}{\sum t_i/K_i}
  • KKdielectric constant of the slab
  • ttthickness of the slab
  • C0C_0capacitance with vacuum in the gap

Visualization · a dielectric slab in a capacitor

−+−+−+−+−+−++Q−QE₀E₀/Kdtd = 4 mmt = 2 mmK = 2d − t + t/K= 4 − 2 + 2/2= 3 mmC/C₀ = 4 ÷ 3= 1.33gap part filled

C = ε₀A/(d − t + t/K), so C/C₀ = 1.33

The slab is polarised: charges on its faces oppose the field, so the field inside falls to E₀/K. Only the slab's own thickness shrinks, t becomes t/K, and the air left in the gap still counts in full. Fill the gap (t = d) and C = KC₀.

Worked example

The plates of a capacitor are 4 mm apart. A slab of dielectric constant 2 and thickness 2 mm is slid in. By what factor does the capacitance change?
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2025 · NEET (UG) 2025 — 04 May 2025 · Q20Hard

Example 2 · Electrostatic Potential and Capacitance · Capacitors and Dielectrics

The plates of a parallel plate capacitor are separated by dd. Two slabs of different dielectric constant K1K_1 and K2K_2 with thickness 38d\frac{3}{8}d and d2\frac{d}{2}, respectively are inserted in the capacitor. Due to this, the capacitance becomes two times larger than when there is nothing between the plates. If K1=1.25K2K_1 = 1.25 K_2, the value of K1K_1 is:

Polar means a permanent dipole

A polar molecule has a dipole moment of its own. A molecule that gets one only while a field acts is non-polar.

A thin slab changes only its own thickness

For a slab of thickness t, replace t by t/Kt/K and keep the rest of the gap as air. Multiplying the whole capacitance by K is right only when the slab fills the gap.

Count the air gap that is left

When slabs do not fill the gap, the leftover air layer is a term t/1t/1 in ∑ti/Ki\sum t_i/K_i. Forgetting it gives too large a capacitance.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (2)

  • Capacitance and the parallel plate capacitor

    Parallel plate capacitor

    C=QV,C=ε0Ad,E=σε0C = \frac{Q}{V}, \qquad C = \frac{\varepsilon_0 A}{d}, \qquad E = \frac{\sigma}{\varepsilon_0}
  • Dielectrics and dielectric constant

    Capacitor with a dielectric

    C=KC0 (gap full),C=ε0Ad−t+t/K,C=ε0A∑ti/KiC = KC_0 \ \text{(gap full)}, \qquad C = \frac{\varepsilon_0 A}{d - t + t/K}, \qquad C = \frac{\varepsilon_0 A}{\sum t_i/K_i}

Watch out for (6)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper