PYQ Vault

NEET Physics · Electrostatic Potential and Capacitance

Equipotentials and Potential Energy

Equipotential surfaces and why the field meets them at right angles, the field as the rate at which potential falls, and the work and potential energy of charges moved in a field.

Why this matters

Three NEET questions, from 2022 to 2026. One asks the angle between field lines and an equipotential surface (2022). Two from Re-NEET 2026 use energy: the speed of a charge that falls from 3R onto the surface of a charged sphere, and the work done in moving a unit charge between two points outside a charged sphere.

Concept 1 of 2: Equipotential surfaces and the field

Join all the points that have the same potential and you get an equipotential surface. Moving a charge along it takes no work, so the field can have no part along the surface: it must cross it at right angles. The field always points downhill, from higher potential to lower, and it is strongest where the surfaces crowd together.

Definition

  • Equipotential surface: a surface with the same potential at every point.
  • For a point charge the equipotentials are spheres centred on the charge. For a uniform field they are planes at right angles to the field.
  • No work is done in moving a charge along an equipotential, so the field is normal to it at every point.
  • The field points the way the potential falls fastest. Its size is the fall in potential per metre: E=−dVdrE = -\dfrac{dV}{dr}.
  • In a uniform field, two planes a distance d apart along the field differ in potential by EdEd.
  • If V depends on x alone, Ex=−dVdxE_x = -\dfrac{dV}{dx}.

Field from potential

E=−dVdr,Ex=−dVdx,ΔV=Ed (uniform field)E = -\frac{dV}{dr}, \qquad E_x = -\frac{dV}{dx}, \qquad \Delta V = Ed \ \text{(uniform field)}

Diagram · equipotential surfaces and field lines

Point chargeUniform field+equal steps of V,crowded near the charge30 V20 V10 VW = 0d = 5 cmE = 20/0.05 = 400 V/m

Every field line (red) crosses every equipotential (blue) at right angles, and points from higher potential to lower. Around a point charge the equipotentials are spheres, seen here as circles; in a uniform field they are planes. Moving a charge along one takes no work.

Worked example

In a uniform field, the equipotential planes of 30 V and 10 V are 5 cm apart. Find the size and direction of the field.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2022 · NEET (UG) 2022 — 17 Jul 2022 · Q16Easy

Example 1 · Electrostatic Potential and Capacitance · Equipotentials and Potential Energy

The angle between the electric lines of force and the equipotential surface is

Field lines meet equipotentials at 90°

A field line always crosses an equipotential surface at right angles, never along it. If it had a part along the surface, moving a charge there would need work.

Keep the minus sign

The field is −dV/dx-dV/dx. A potential that rises with x gives a field pointing towards negative x.

Crowded surfaces mean a strong field

Where equipotentials of equal steps are close together the potential falls quickly, so the field is strong. Wide spacing means a weak field.

Concept 2 of 2: Potential energy and work

A charge q at a point of potential V has potential energy qV. To move it slowly from A to B an outside force does work q times the change in potential. Let it go instead, and the field does the work: the potential energy it loses turns into kinetic energy. Like charges gain energy when pushed together; unlike charges lose energy as they come together.

Definition

  • Work by an outside force to move q slowly from A to B: W=q(VB−VA)W = q(V_B - V_A). It does not depend on the path.
  • Potential energy of a charge q at a point of potential V: U=qVU = qV.
  • Two charges r apart: U=kq1q2rU = \dfrac{kq_1q_2}{r}, sign included (negative for unlike charges). For three or more, add this over every pair.
  • A charge released in a field: kinetic energy gained = potential energy lost, 12mv2=UA−UB\dfrac{1}{2}mv^{2} = U_A - U_B.
  • Outside a uniformly charged sphere the potential is kQr\dfrac{kQ}{r}, measured from its centre, as for a point charge Q there.
  • Electron volt: the energy an electron gains through 1 V. 1 eV = 1.6×10−191.6 \times 10^{-19} J.

Work and potential energy

W=q(VB−VA),U=kq1q2r,12mv2=UA−UBW = q(V_B - V_A), \qquad U = \frac{kq_1q_2}{r}, \qquad \frac{1}{2}mv^{2} = U_A - U_B

Worked example

Charges of +2 μC and +3 μC are 0.3 m apart. Find their potential energy, and the work needed to bring them to 0.1 m apart.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2026 · Re-NEET (UG) 2026 — 21 Jun 2026 · Q34Hard

Example 2 · Electrostatic Potential and Capacitance · Equipotentials and Potential Energy

Consider a fixed uniformly charged insulating sphere with radius R and total charge +Q. A point charge −q-q (q≪Qq \ll Q) with mass m is released from rest at a distance of 3R from the centre of the charged sphere. When the point charge reaches the surface of the sphere, its speed is : (ϵ0\epsilon_0 is the permittivity of vacuum, neglect gravitational forces).

Keep the signs of both charges

U=kq1q2/rU = kq_1q_2/r is negative for unlike charges. Dropping the signs makes an attracted charge seem to lose speed as it falls in.

Measure from the centre of a sphere

Outside a charged sphere use kQ/rkQ/r with r from the centre. A charge at 3R from the centre is 2R from the surface, but its potential is kQ/(3R)kQ/(3R).

The path does not matter

The work to move a charge between two points depends only on their potentials, q(VB−VA)q(V_B - V_A), not on the route or tube it travels along.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (2)

  • Equipotential surfaces and the field

    Field from potential

    E=−dVdr,Ex=−dVdx,ΔV=Ed (uniform field)E = -\frac{dV}{dr}, \qquad E_x = -\frac{dV}{dx}, \qquad \Delta V = Ed \ \text{(uniform field)}
  • Potential energy and work

    Work and potential energy

    W=q(VB−VA),U=kq1q2r,12mv2=UA−UBW = q(V_B - V_A), \qquad U = \frac{kq_1q_2}{r}, \qquad \frac{1}{2}mv^{2} = U_A - U_B

Watch out for (6)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper