PYQ Vault

NEET Physics · Laws of Motion

Circular Motion

A body moving in a circle needs a net force toward the centre, mv²/r, supplied by a real force such as tension, friction or the normal reaction of a banked road.

Why this matters

Three NEET questions, all from 2024 or later. Two whirl a bob on a string in a horizontal circle and link the tension to the rotation speed (NEET 2024 and Re-NEET 2024), and one finds the banking angle at which a car's tyres wear least (Re-NEET 2026).

Concept 1 of 2: Centripetal force

Even at a steady speed, a body going round a circle keeps changing direction, so it is accelerating toward the centre. Some real force must pull it inward: the string for a whirled stone, friction for a car on a level turn. Centripetal force is not a new kind of force, it is the job one of these forces does.

Definition

  • Acceleration toward the centre: ac=v2r=ω2ra_c = \dfrac{v^{2}}{r} = \omega^{2}r.
  • The net force toward the centre must be Fc=mv2r=mω2rF_c = \dfrac{mv^{2}}{r} = m\omega^{2}r.
  • A bob whirled on a string in a horizontal circle: T=mω2rT = m\omega^{2}r. At a fixed radius T∝ω2T \propto \omega^{2}, so ω∝T\omega \propto \sqrt{T}.
  • ω=2πn\omega = 2\pi n, with n in revolutions per second (rpm divided by 60).
  • The breaking tension sets the largest speed: vmax⁡=Tmax⁡ rmv_{\max} = \sqrt{\dfrac{T_{\max}\,r}{m}}.
  • If the string breaks, the body flies off along the tangent.

Centripetal force

Fc=mv2r=mω2r,ω=2πnF_c = \frac{mv^{2}}{r} = m\omega^{2}r, \qquad \omega = 2\pi n
  • ω\omegaangular speed in rad/s
  • nnrevolutions per second

Animation · motion in a circle at constant speed

The string breakscentrealong the tangentnot outwardsstring breaks herea, Fva = v²/r = 20²/80 = 5.0 m/s²
  1. At the top: The ball moves round the circle at a steady speed. Its velocity v is along the tangent. Its acceleration a, and the resultant force F (the string's tension), point to the centre.
  2. A quarter turn on: Same speed, new direction. A change of direction is a change of velocity, so the ball is accelerating even though its speed does not change.
  3. Half a turn on: a is always at right angles to v, towards the centre, and its size is a = v²/r. For the car at 20 m/s on a bend of radius 80 m: a = 20²/80 = 400/80 = 5.0 m/s².
  4. Three quarters on: The string keeps pulling the ball towards the centre, so it keeps turning. Double the speed and a becomes four times as large, because a = v²/r.
  5. The string breaks: No force towards the centre now, so no acceleration: the ball goes straight on along the tangent, at the same speed. It does not fly outwards.

v (green) is the velocity, along the tangent. a, F (red) is the acceleration and the resultant force, towards the centre. There is no outward force on the ball.

Worked example

A 0.5 kg stone on a 1 m string goes round a horizontal circle at 2 revolutions per second. Find the tension in the string.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2024 · Re-NEET (UG) 2024 — 23 Jun 2024 · Q2Easy

Example 1 · Laws of Motion · Circular Motion

A bob is whirled in a horizontal circle by means of a string at an initial speed of 10 rpm. If the tension in the string is quadrupled while keeping the radius constant, the new speed is:

Tension goes as ω squared

At a fixed radius T∝ω2T \propto \omega^{2}. Doubling the rotation speed makes the tension four times; four times the tension only doubles the rotation speed.

Centripetal force is not an extra force

Do not draw mv2/rmv^{2}/r as one more force on the body. It is the net of the real forces (tension, friction, normal reaction) toward the centre.

Change rpm to rad/s before using numbers

In T=mω2rT = m\omega^{2}r with actual values, ω\omega must be in rad/s: ω=2π×rpm60\omega = 2\pi \times \dfrac{\text{rpm}}{60}. Only a ratio of two speeds can stay in rpm.

Concept 2 of 2: Level and banked roads

On a level road only friction can turn a car, so there is a top speed beyond which the car skids. Tilting the road helps: the road's push on the car now leans toward the centre and supplies part of the turning force. At one particular speed it supplies all of it, so the tyres need no sideways grip and wear the least.

Definition

  • Level road: friction gives the centripetal force, mv2r≤μsmg\dfrac{mv^{2}}{r} \le \mu_s mg, so vmax⁡=μsrgv_{\max} = \sqrt{\mu_s r g}, whatever the car's mass.
  • Banked road at angle θ: the normal reaction's horizontal part points to the centre.
  • Optimum speed: with no friction needed, tan⁡θ=vo2rg\tan\theta = \dfrac{v_o^{2}}{rg}, that is vo=rgtan⁡θv_o = \sqrt{rg\tan\theta}. At this speed tyre wear is least.
  • With friction, the largest safe speed on a banked road is vmax⁡=rg μs+tan⁡θ1−μstan⁡θv_{\max} = \sqrt{rg\,\dfrac{\mu_s + \tan\theta}{1 - \mu_s\tan\theta}}.

Roads

vmax⁡=μsrg,tan⁡θ=vo2rg,vmax⁡=rg μs+tan⁡θ1−μstan⁡θv_{\max} = \sqrt{\mu_s r g}, \qquad \tan\theta = \frac{v_o^{2}}{rg}, \qquad v_{\max} = \sqrt{rg\,\frac{\mu_s + \tan\theta}{1 - \mu_s \tan\theta}}
  • vov_ooptimum speed, needing no friction
  • θ\thetabanking angle

Worked example

A level circular road has radius 100 m, and μs=0.4\mu_s = 0.4 between the tyres and the road. What is the largest speed at which a car can take the turn (g = 10 m/s²)?
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2026 · Re-NEET (UG) 2026 — 21 Jun 2026 · Q41Moderate

Example 2 · Laws of Motion · Circular Motion

A car travels on a circular racetrack of radius 50 m, which is banked at an angle θ\theta. If the car travels at a speed 10 ms−110\ \text{ms}^{-1}, then the wear and tear on its tyres is minimum. Taking the acceleration due to gravity to be 10 ms−210\ \text{ms}^{-2}, the value of θ\theta is :

Least tyre wear means no friction

The speed at which tyres wear least is the optimum speed, where the road's normal reaction alone turns the car and no friction is needed. Use tan⁡θ=v2/(rg)\tan\theta = v^{2}/(rg) with no μ\mu in it.

The speed is squared

In tan⁡θ=v2/(rg)\tan\theta = v^{2}/(rg) the speed is squared. Twice the speed needs four times the value of tan⁡θ\tan\theta, not twice.

The level-road limit has no mass in it

vmax⁡=μsrgv_{\max} = \sqrt{\mu_s r g} for a heavy truck and a light car alike. Only the grip and the radius set it.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (2)

  • Centripetal force

    Centripetal force

    Fc=mv2r=mω2r,ω=2πnF_c = \frac{mv^{2}}{r} = m\omega^{2}r, \qquad \omega = 2\pi n
  • Level and banked roads

    Roads

    vmax⁡=μsrg,tan⁡θ=vo2rg,vmax⁡=rg μs+tan⁡θ1−μstan⁡θv_{\max} = \sqrt{\mu_s r g}, \qquad \tan\theta = \frac{v_o^{2}}{rg}, \qquad v_{\max} = \sqrt{rg\,\frac{\mu_s + \tan\theta}{1 - \mu_s \tan\theta}}

Watch out for (6)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper