PYQ Vault

NEET Physics · Laws of Motion

Connected Bodies and Friction

Bodies that move together share one acceleration, static friction holds a body up to a limit, and on a slope the weight splits into a part along it and a part into it.

Why this matters

Five NEET questions from 2023 to 2026, four of them from 2024 or later. One finds the push between two blocks (NEET 2024), two find the largest acceleration a vehicle can have before a box on its floor slips (2023 and 2026), and two work on a slope: a box pulled up a smooth one by a cord (Re-NEET 2024) and a friction coefficient from the times taken down a smooth and a rough slope (2025).

Concept 1 of 3: Connected bodies, tension and contact force

When blocks are pushed together, or tied by strings, they move as one. So first treat the whole group as a single body to find the shared acceleration. Then look at one block alone: the force on it from its neighbour is exactly what that block needs to have that acceleration.

Definition

  • Bodies moving together share one acceleration: a=Fnetmtotala = \dfrac{F_{\text{net}}}{m_{\text{total}}}, using only forces from outside the group.
  • Then take one body alone. The force between two blocks, or the tension in a string, equals the mass it moves times a: N=mmoved aN = m_{\text{moved}}\,a.
  • A light string has the same tension all along it, and the same on both sides of a smooth light pulley.
  • Two masses over a fixed pulley (m1>m2m_1 > m_2): a=(m1−m2)gm1+m2a = \dfrac{(m_1 - m_2)g}{m_1 + m_2} and T=2m1m2gm1+m2T = \dfrac{2m_1m_2g}{m_1 + m_2}.
  • A string or a weighing scale holding a body in a lift reads m(g+a)m(g + a) when the lift accelerates upward, m(g−a)m(g - a) when it accelerates downward, mg at constant velocity, and zero in free fall.
  • Equilibrium: the net force is zero, so all the forces on the body add up to zero as vectors.

Connected bodies

a=Fm1+m2,N=m2a,apulley=(m1−m2)gm1+m2a = \frac{F}{m_1 + m_2}, \qquad N = m_2 a, \qquad a_{\text{pulley}} = \frac{(m_1 - m_2)g}{m_1 + m_2}

Worked example

Masses of 5 kg and 3 kg hang from the two ends of a light string over a smooth fixed pulley. Find the acceleration and the tension (g = 10 m/s²).
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2024 · NEET (UG) 2024 — 05 May 2024 · Q17Easy

Example 1 · Laws of Motion · Connected Bodies and Friction

A horizontal force 10 N is applied to a block AA as shown in figure. The mass of blocks AA and BB are 2 kg and 3 kg respectively. The blocks slide over a frictionless surface. The force exerted by block AA on block BB is:

The front block does not get the whole push

A push on the rear block moves both blocks. The block in front receives only its own mass times the shared acceleration, which is less than the applied force.

Only acceleration changes the reading

In a lift moving at constant velocity, up or down, a string holding a body still reads mg. Only an acceleration makes it m(g+a)m(g + a) or m(g−a)m(g - a).

The tension is not the hanging weight

Over a pulley with unequal masses, the tension lies between the two weights: less than m1gm_1g and more than m2gm_2g.

Concept 2 of 3: Static and kinetic friction

Push a heavy box gently and it does not move: the floor pushes back with friction just as hard as you push. Static friction grows with your push only up to a limit. Push past that limit and the box slides, and a slightly smaller kinetic friction then acts on it.

Definition

  • Static friction adjusts itself to stop sliding, up to a limit: fs≤μsNf_s \le \mu_s N. Below the limit it equals the applied force.
  • Kinetic friction acts while sliding: fk=μkNf_k = \mu_k N, and μk<μs\mu_k < \mu_s.
  • Friction does not depend on the area of contact. On a level surface with no other vertical force, N = mg.
  • A box on the floor of a vehicle moves with it only through static friction: ma≤μsmgma \le \mu_s mg, so amax⁡=μsga_{\max} = \mu_s g, whatever the box's mass.
  • A vehicle braking or speeding up through friction alone has an acceleration of size μg\mu g.

Friction

fs≤μsN,fk=μkN,amax⁡=μsgf_s \le \mu_s N, \qquad f_k = \mu_k N, \qquad a_{\max} = \mu_s g
mass mmg (weight)N (normal)F (applied)f (friction)Vertical: N = mg. Horizontal net: F minus f drives the block.

Draw every force acting ON the block as an arrow from its centre. The vertical pair (N up, mg down) cancels on flat ground; the net horizontal force F minus f gives the acceleration via F-net = ma.

Worked example

A 2 kg block lies on a floor with μs=0.5\mu_s = 0.5 and μk=0.4\mu_k = 0.4. Find the friction on it when it is pushed sideways with 6 N, and its acceleration when it is pushed with 12 N (g = 10 m/s²).
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2026 · NEET (UG) 2026 — 03 May 2026 · Q11Easy

Example 2 · Laws of Motion · Connected Bodies and Friction

A box of mass 15 kg is kept on the floor of a stationary trolley. The coefficient of static friction between the box and the trolley is 0.12. Keeping the box in stationary state over the trolley, the maximum acceleration with which the trolley can be moved horizontally in m s−2^{-2} is: (g=10g = 10 m/s2^2)

Static friction is only as big as it needs to be

Below the limit, static friction equals the applied force, not μsN\mu_s N. A 2.5 N push on a block whose limit is 10 N meets 2.5 N of friction.

The mass cancels

The largest acceleration before a box on a vehicle's floor slips is μsg\mu_s g. The box's mass does not enter, so a given mass in the question is not needed.

Sliding friction is smaller

Once a body slides, friction drops from the limit μsN\mu_s N to μkN\mu_k N. Use μk\mu_k for anything that is already moving.

Concept 3 of 3: Motion on an inclined plane

On a slope, split the weight into two parts. One part pulls the body down along the slope; the other presses it into the slope and sets the normal reaction. On a smooth slope only the first part matters. On a rough slope friction also acts along the slope, against the motion, and it is set by the second part.

Definition

  • Weight along the slope: mgsin⁡θmg\sin\theta. Weight into the slope: mgcos⁡θmg\cos\theta, so N=mgcos⁡θN = mg\cos\theta when nothing else pushes across the slope.
  • Smooth slope, sliding down: a=gsin⁡θa = g\sin\theta. Pulled up along the slope by a cord of tension T: T−mgsin⁡θ=maT - mg\sin\theta = ma.
  • Rough slope, sliding down: a=g(sin⁡θ−μkcos⁡θ)a = g(\sin\theta - \mu_k\cos\theta). Moving up: the retardation is g(sin⁡θ+μkcos⁡θ)g(\sin\theta + \mu_k\cos\theta).
  • Angle of repose: a block just begins to slide when tan⁡θ=μs\tan\theta = \mu_s.
  • From rest down a length L: L=12at2L = \tfrac{1}{2}at^{2}, so t∝1at \propto \dfrac{1}{\sqrt{a}}.

Inclined plane

adown=g(sin⁡θ−μkcos⁡θ),N=mgcos⁡θ,tan⁡θrepose=μsa_{\text{down}} = g(\sin\theta - \mu_k\cos\theta), \qquad N = mg\cos\theta, \qquad \tan\theta_{\text{repose}} = \mu_s

Worked example

A block slides down a rough slope with sin⁡θ=0.6\sin\theta = 0.6 and cos⁡θ=0.8\cos\theta = 0.8. If μk=0.5\mu_k = 0.5, find its acceleration (g = 10 m/s²).
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2025 · NEET (UG) 2025 — 04 May 2025 · Q4Moderate

Example 3 · Laws of Motion · Connected Bodies and Friction

There are two inclined surfaces of equal length (LL) and same angle of inclination 45∘^\circ with the horizontal. One of them is rough and the other is perfectly smooth. A given body takes 2 times as much time to slide down on rough surface than on the smooth surface. The coefficient of kinetic friction (μk\mu_k) between the object and the rough surface is close to

Times compare as square roots

From rest over the same length, t∝1/at \propto 1/\sqrt{a}. Taking twice as long means a quarter of the acceleration, not half.

Friction on a slope uses cos θ

On a slope N=mgcos⁡θN = mg\cos\theta, so friction is μmgcos⁡θ\mu mg\cos\theta, not μmg\mu mg.

Going up, both forces slow it

A body moving up a rough slope has gravity's part and friction both pointing down the slope, so the retardation is g(sin⁡θ+μkcos⁡θ)g(\sin\theta + \mu_k\cos\theta), with a plus sign.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (3)

  • Connected bodies, tension and contact force

    Connected bodies

    a=Fm1+m2,N=m2a,apulley=(m1−m2)gm1+m2a = \frac{F}{m_1 + m_2}, \qquad N = m_2 a, \qquad a_{\text{pulley}} = \frac{(m_1 - m_2)g}{m_1 + m_2}
  • Static and kinetic friction

    Friction

    fs≤μsN,fk=μkN,amax⁡=μsgf_s \le \mu_s N, \qquad f_k = \mu_k N, \qquad a_{\max} = \mu_s g
  • Motion on an inclined plane

    Inclined plane

    adown=g(sin⁡θ−μkcos⁡θ),N=mgcos⁡θ,tan⁡θrepose=μsa_{\text{down}} = g(\sin\theta - \mu_k\cos\theta), \qquad N = mg\cos\theta, \qquad \tan\theta_{\text{repose}} = \mu_s

Watch out for (9)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper