PYQ Vault

NEET Physics · Mechanical Properties of Fluids

Pressure and Fluid Flow

Pressure in a fluid at rest, P = P₀ + ρgh, Pascal's law and floating, then moving fluids: the equation of continuity Av = constant and Bernoulli's principle.

Why this matters

Four NEET questions from 2023 to 2026, three of them from 2024 or later. One asks how deep a submarine can go for a given absolute pressure (2026). Three are about moving water: the principle a venturi meter works on (2023), which end of a tube has the larger kinetic energy per unit volume (Re-NEET 2024), and a flow rate found from a pressure difference and two areas (Re-NEET 2026).

Concept 1 of 3: Pressure at a depth and Pascal's law

A liquid at rest presses on everything it touches. The deeper you go, the more liquid sits above you, so the pressure grows with depth. On top of that, the air above the liquid presses down too. Pascal noticed something useful: a pressure added at one place in an enclosed liquid reaches every other place equally. That is how a small push on a narrow piston lifts a car on a wide one.

Definition

  • Pressure is force per unit area: P=FAP = \dfrac{F}{A}, in pascal (Pa). 1 atm is about 1.013×1051.013 \times 10^{5} Pa.
  • At a depth h in a liquid of density ρ\rho open to the air: P=P0+ρghP = P_0 + \rho g h, where P0P_0 is the atmospheric pressure. This is the absolute pressure.
  • Gauge pressure is the part above the atmosphere: P−P0=ρghP - P_0 = \rho g h.
  • Points at the same depth in the same liquid at rest have the same pressure, whatever the shape of the vessel.
  • Pascal's law: a change of pressure at one point of an enclosed fluid is passed on equally to every point. Hydraulic lift: F1A1=F2A2\dfrac{F_1}{A_1} = \dfrac{F_2}{A_2}.
  • Archimedes' principle: the upthrust on a body in a fluid equals the weight of the fluid it pushes aside. A floating body has the fraction ρbodyρliquid\dfrac{\rho_{body}}{\rho_{liquid}} of its volume under the surface.

Pressure at a depth

P=P0+ρgh,Pgauge=ρgh,F1A1=F2A2P = P_0 + \rho g h, \qquad P_{\text{gauge}} = \rho g h, \qquad \frac{F_1}{A_1} = \frac{F_2}{A_2}
  • P0P_0atmospheric pressure at the surface
  • ρ\rhodensity of the liquid
  • hhdepth below the surface
surfaceh₁h₂h₃P = rho g h — deeper means more pressure

Gauge pressure depends only on depth h and density rho (P = rho g h) — not on the shape of the container or the area of its base. The arrows grow with depth.

Worked example

An open tank holds water 5 m deep. Find the gauge pressure and the absolute pressure at its bottom. (ρ=1000 kg m−3\rho = 1000\ \text{kg m}^{-3}, g = 10 m/s², 1 atm = 10510^{5} Pa)
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2026 · NEET (UG) 2026 — 03 May 2026 · Q44Moderate

Example 1 · Mechanical Properties of Fluids · Pressure and Fluid Flow

A submarine is designed to withstand an absolute pressure of 100 atm. How deep can it go below the water surface? (Consider the density of water = 1000 kg m−3^{-3}, 1 atm = 1×1051 \times 10^5 Pa and gravitational acceleration g=10g = 10 m/s2^2)

Absolute pressure includes the air above

A gauge or a design limit given as absolute pressure already contains the 1 atm at the surface. Subtract P0P_0 before you use ρgh\rho g h, or the depth comes out too large.

Pistons scale by radius squared

A hydraulic lift multiplies force by the ratio of the AREAS. A piston with 4 times the radius has 16 times the area, so it gives 16 times the force, not 4 times.

Concept 2 of 3: Streamline flow and the equation of continuity

In smooth, steady flow every bit of liquid that passes a point follows the same path, called a streamline. A liquid like water hardly squeezes, so whatever volume enters a pipe each second must leave it each second. Where the pipe is narrow, the same volume has to get through a smaller opening, so the water moves faster.

Definition

  • Streamline flow: the velocity at any given point stays the same in time. Each particle passing that point follows the same path.
  • Two streamlines never cross: at a crossing a particle would have two velocities at once. Where streamlines crowd together the flow is faster.
  • Equation of continuity for an incompressible liquid: A1v1=A2v2A_1 v_1 = A_2 v_2. The volume flow rate Q=AvQ = Av is the same all along the pipe.
  • For a round pipe A=πr2A = \pi r^{2}, so v∝1r2v \propto \dfrac{1}{r^{2}}.
  • Units: Q is in m³/s. Change cm² to m² by multiplying by 10−410^{-4}; 1 m³ is 10610^{6} cm³ and 1000 L.

Equation of continuity

A1v1=A2v2=QA_1 v_1 = A_2 v_2 = Q
  • AAarea of cross-section of the pipe
  • vvspeed of the liquid there
  • QQvolume of liquid passing per second

Visualization · narrow pipe, faster flow

A₁A₂wide: radius Rnarrow: radius R/3v₁ = Vv₂ = 9Vshaded: the water that passes in 1 s

A₂ = A₁ × 0.11, so v₂ = A₁v₁/A₂ = 9V

Q = A₁v₁ = A₂v₂: the same volume every second through both sections.

Area goes as the radius squared. A third of the radius is a ninth of the area, so the water moves nine times faster, not three. The two shaded blocks hold the same volume: the narrow one is longer but thinner.

Worked example

Water flows at 2 m/s in a pipe of cross-section 4 cm². The pipe narrows to 1 cm². Find the speed in the narrow part and the volume flow rate.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2026 · Re-NEET (UG) 2026 — 21 Jun 2026 · Q10Moderate

Example 2 · Mechanical Properties of Fluids · Pressure and Fluid Flow

Water flows in a streamline motion through a horizontal pipe of circular cross-section as shown in the figure. The pressure difference of water between P and Q is 15 Nm−215\ \text{Nm}^{-2}. The area of cross-section at P and Q are 40 cm240\ \text{cm}^2 and 20 cm220\ \text{cm}^2, respectively. The rate of flow of water through the pipe, in cm3s−1\text{cm}^3\text{s}^{-1}, is : [Take density of water =1000 kg m−3= 1000\ \text{kg m}^{-3}]

The narrow part is the fast part

The same volume passes every section each second, so a smaller area means a larger speed. Speed goes as 1/r21/r^{2}, so halving the radius makes the flow four times as fast.

Convert the area before multiplying

Areas are often given in cm². Multiply by 10−410^{-4} to get m² before you find a flow rate in m³/s, then multiply by 10610^{6} if the answer is wanted in cm³/s.

Concept 3 of 3: Bernoulli's principle, efflux and lift

Bernoulli's principle is conservation of energy for a flowing liquid. Each cubic metre of liquid carries pressure energy, kinetic energy and potential energy, and their total stays the same along a streamline. So where the liquid speeds up, as in the narrow part of a pipe, its pressure must fall. That one idea explains a venturi meter, the lift on an aircraft wing and how fast water spurts from a hole in a tank.

Definition

  • Along a streamline of steady flow of an incompressible, non-viscous liquid: P+12ρv2+ρghP + \dfrac{1}{2}\rho v^{2} + \rho g h is constant.
  • Each term is an energy per unit volume: 12ρv2\dfrac{1}{2}\rho v^{2} is the kinetic energy per unit volume and ρgh\rho g h the potential energy per unit volume.
  • Horizontal flow: P1−P2=12ρ(v22−v12)P_1 - P_2 = \dfrac{1}{2}\rho\left(v_2^{2} - v_1^{2}\right). Faster flow, lower pressure.
  • Torricelli's law: liquid leaves a small hole a depth h below the open surface at v=2ghv = \sqrt{2gh}, the speed of a body falling freely through h.
  • A venturi meter finds the speed of flow from the pressure drop at a narrow throat; it works on Bernoulli's principle.
  • Dynamic lift: air moves faster over the top of a wing, so the pressure there is lower. Lift force = pressure difference × wing area.

Bernoulli's principle

P+12ρv2+ρgh=constant,vefflux=2ghP + \frac{1}{2}\rho v^{2} + \rho g h = \text{constant}, \qquad v_{\text{efflux}} = \sqrt{2gh}

Worked example

Water flows through a horizontal pipe. Its speed is 2 m/s at a wide section and 4 m/s at a narrow section. Find the pressure difference between the two sections and say which has the higher pressure. (ρ=1000 kg m−3\rho = 1000\ \text{kg m}^{-3})
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2023 · NEET (UG) 2023 — 07 May 2023 · Q23Easy

Example 3 · Mechanical Properties of Fluids · Pressure and Fluid Flow

The venturi-meter works on

Faster flow means lower pressure

In a horizontal pipe the pressure is highest where the liquid is slowest. A statement that the pressure is larger where the speed is larger is false.

Efflux speed uses the depth below the surface

In v=2ghv = \sqrt{2gh}, h is measured down from the liquid surface to the hole, not up from the ground or the bottom of the tank.

Height changes the balance too

When the two points are at different heights, keep the ρgh\rho g h terms. Liquid that rises loses kinetic energy or pressure to pay for the potential energy it gains.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (3)

Watch out for (7)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper