PYQ Vault

NEET Physics · Mechanical Properties of Fluids

Viscosity and Terminal Velocity

Viscosity as the friction between layers of a moving fluid, Stokes' law F = 6πηrv for a sphere, and the terminal velocity a ball reaches when the forces on it balance.

Why this matters

Three NEET questions, from 2021, 2022 and Re-NEET 2026, all about a ball falling through a viscous liquid. One asks for the viscous force once the ball moves at constant velocity (2021). Two ask for a graph: the ball's speed against time (2022) and the terminal velocity against the ratio of the ball's density to the liquid's (Re-NEET 2026).

Concept 1 of 2: Viscosity, Stokes' law and the viscous force

Pour honey and water side by side: the honey moves slowly because its layers drag on each other. Viscosity is this internal friction between layers of a fluid that slide past one another. A ball moving through a liquid feels it as a backward force that grows with the ball's speed. Once the ball moves at a steady velocity, there is no net force on it, so the viscous force simply makes up whatever the other forces leave over.

Definition

  • Viscous force between layers: F=ηAvlF = \eta A \dfrac{v}{l}, where v is the relative speed of two layers a distance l apart and A is the area of a layer.
  • η\eta is the coefficient of viscosity. SI unit: Pa s (also written N s m⁻² or poiseuille).
  • The viscosity of a liquid decreases as it is heated; the viscosity of a gas increases.
  • Stokes' law: a sphere of radius r moving at speed v through a fluid feels F=6πηrvF = 6\pi \eta r v.
  • At constant velocity the net force is zero: weight = upthrust + viscous force, so Fv=mg−ρliquidVgF_v = mg - \rho_{liquid} V g.

Stokes' law

F=ηAvl,F=6πηrvF = \eta A \frac{v}{l}, \qquad F = 6\pi \eta r v
  • η\etacoefficient of viscosity
  • rrradius of the sphere
  • vvspeed of the sphere through the fluid

Worked example

A sphere of radius 1 mm moves at 0.1 m/s through a liquid of viscosity 0.5 Pa s. Find the viscous force on it.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2021 · NEET (UG) 2021 — 12 Sep 2021 · Q2Moderate

Example 1 · Mechanical Properties of Fluids · Viscosity and Terminal Velocity

The velocity of a small ball of mass MM and density dd, when dropped in a container filled with glycerine becomes constant after some time. If the density of glycerine is d2\dfrac{d}{2}, then the viscous force acting on the ball will be

Liquids and gases go opposite ways

Heating makes a liquid less viscous but a gas more viscous. A statement that heating lowers the viscosity of every fluid is false.

Do not forget the upthrust

At constant velocity the viscous force is not equal to the weight. The upthrust also acts upward, so FvF_v is the weight minus the upthrust.

Concept 2 of 2: Terminal velocity

Drop a ball into a tall jar of glycerine. At first it speeds up, but the faster it goes the bigger the viscous drag. Soon the drag plus the upthrust exactly balance the weight. From then on the ball falls at a steady speed, the terminal velocity. A raindrop does the same in air, which is why rain does not hit you like a bullet.

Definition

  • Setting weight = upthrust + Stokes force for a sphere gives vt=2r2(σ−ρ)g9ηv_t = \dfrac{2r^{2}(\sigma - \rho)g}{9\eta}, where σ\sigma is the density of the sphere and ρ\rho that of the fluid.
  • vt∝r2v_t \propto r^{2}: a drop of twice the radius falls four times as fast.
  • vt∝(σ−ρ)v_t \propto (\sigma - \rho): it is zero when the densities are equal, and when σ<ρ\sigma < \rho the body rises (an air bubble in water).
  • The speed starts at zero and rises, more and more slowly, towards vtv_t; it never passes it.
  • When n equal drops join into one, volume is kept: the new radius is n1/3rn^{1/3}r, so the new terminal velocity is n2/3n^{2/3} times the old.

Terminal velocity

vt=2r2(σ−ρ)g9ηv_t = \frac{2r^{2}(\sigma - \rho)g}{9\eta}
  • σ\sigmadensity of the falling sphere
  • ρ\rhodensity of the fluid
  • η\etacoefficient of viscosity of the fluid

Worked example

A metal ball of radius 1 mm and density 8000 kg/m³ falls through glycerine of density 1250 kg/m³ and viscosity 1.5 Pa s. Find its terminal velocity (g = 10 m/s²).
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2026 · Re-NEET (UG) 2026 — 21 Jun 2026 · Q12Moderate

Example 2 · Mechanical Properties of Fluids · Viscosity and Terminal Velocity

In the measurement of viscosity of liquids using terminal velocity experiment, spherical balls of same radius but having different densities are used. The variation of the terminal velocity (v) with the ratio of density of spherical ball (σ\sigma) to density of the liquid (ρ\rho), is best represented by :

Terminal velocity goes as r squared

In vt=2r2(σ−ρ)g9ηv_t = \dfrac{2r^{2}(\sigma - \rho)g}{9\eta} the radius is squared. A drop of three times the radius falls nine times as fast, not three times.

Use the density difference

The formula has σ−ρ\sigma - \rho, not σ\sigma alone. Leaving out the liquid's density forgets the upthrust and gives a speed that is too large.

The speed levels off; it does not overshoot

A ball dropped from rest in a viscous liquid speeds up quickly at first and then more and more slowly, getting closer to vtv_t. Its speed-time graph rises and flattens out; it does not climb past vtv_t and come back.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (2)

Watch out for (5)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper