PYQ Vault

NEET Physics · Semiconductor Electronics

Semiconductors and the p-n Junction

Energy bands and band gaps, intrinsic and doped semiconductors, how a p-n junction builds its barrier, what forward and reverse bias do to it, and how a diode behaves in a circuit.

Why this matters

Six NEET questions from 2021 to 2026, three of them from 2026. One compares the currents in n-type and p-type material. Four are about the junction itself: the barrier of a silicon diode, the depletion widths of three diodes under different bias, equal drops across two junctions, and the steep rise of forward current. One finds the current through ideal diodes in a circuit.

Concept 1 of 3: Intrinsic and extrinsic semiconductors

In a solid the electron energies group into bands. The valence band is full, the conduction band above it is where electrons can move freely, and between them is a gap of forbidden energies. A semiconductor's gap is small, so heat lifts a few electrons across and each one leaves a hole behind. Adding a few impurity atoms, doping, gives far more carriers of one kind, and that is what makes a semiconductor useful.

Definition

  • Bands: in a metal the bands overlap or the conduction band is partly filled, so there is no gap. An insulator has a gap Eg>3E_g > 3 eV. A semiconductor has Eg<3E_g < 3 eV: about 1.1 eV for Si and 0.7 eV for Ge.
  • Intrinsic (pure Si or Ge): ne=nh=nin_e = n_h = n_i. At absolute zero it behaves as an insulator. Heating frees more carriers, so its resistivity falls as the temperature rises.
  • n-type: a pentavalent impurity (P, As, Sb), called a donor. Electrons are the majority carriers, holes the minority.
  • p-type: a trivalent impurity (B, Al, Ga, In), called an acceptor. Holes are the majority carriers, electrons the minority.
  • A doped crystal is electrically neutral: each donor or acceptor ion balances the carrier it gave.
  • Mass action: nenh=ni2n_e n_h = n_i^{2}, doped or not.
  • Applying I=neAvdI = neAv_d of Current Electricity to both carriers: I=eA(neve+nhvh)I = eA(n_e v_e + n_h v_h) and σ=e(neμe+nhμh)\sigma = e(n_e\mu_e + n_h\mu_h). Electrons have a larger mobility than holes.

Carriers and conductivity

nenh=ni2,I=eA(neve+nhvh),σ=e(neμe+nhμh)n_e n_h = n_i^{2}, \qquad I = eA(n_e v_e + n_h v_h), \qquad \sigma = e(n_e\mu_e + n_h\mu_h)
  • nin_icarrier density of the pure semiconductor
  • ne,nhn_e, n_helectron and hole densities
  • μe,μh\mu_e, \mu_helectron and hole mobilities

Worked example

Silicon has ni=1.5×1016 m−3n_i = 1.5 \times 10^{16}\ \text{m}^{-3}. It is doped with boron until the hole density is 4.5×1022 m−34.5 \times 10^{22}\ \text{m}^{-3}. Find the electron density, and say which type the crystal is.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2021 · NEET (UG) 2021 — 12 Sep 2021 · Q13Moderate

Example 1 · Semiconductor Electronics · Semiconductors and the p-n Junction

The electron concentration in an nn-type semiconductor is the same as hole concentration in a pp-type semiconductor. An external field (electric) is applied across each of them. Compare the currents in them.

A doped crystal stays neutral

An n-type crystal has more free electrons than holes, but every donor atom that gave an electron is left as a positive ion. The crystal as a whole carries no charge.

The product is fixed, not the sum

Doping raises one carrier density and lowers the other so that nenh=ni2n_e n_h = n_i^{2} still holds. The minority density falls below nin_i; it does not stay at nin_i.

Electrons move more easily than holes

With equal carrier densities and the same field, n-type material carries the larger current, because the electron mobility is greater than the hole mobility.

Concept 2 of 3: The p-n junction and its bias

When p-type meets n-type, electrons diffuse into the p-side and holes into the n-side, and they cancel near the joint. That leaves a thin depletion layer of fixed ions with a field across it, the barrier, which stops further diffusion. A battery that lowers the barrier (forward bias) lets a large current flow; one that raises it (reverse bias) lets only a tiny current through.

Definition

  • Majority carriers diffuse across the junction; the field of the depletion layer drives a drift of minority carriers back. With no battery the two balance and no net current flows.
  • Forward bias: p-side to the positive terminal. The barrier falls and the depletion layer narrows. The current stays small until the threshold (cut-in) voltage, about 0.7 V for silicon and 0.2 V for germanium, and then rises sharply.
  • Reverse bias: n-side to the positive terminal. The barrier rises and the depletion layer widens. A small current (microamperes) flows, carried by minority carriers; it hardly changes with the voltage until breakdown, where it rises suddenly.
  • The field across a depletion layer of width d with barrier VbV_b is about E=VbdE = \dfrac{V_b}{d}. A charge that crosses the junction against the barrier loses kinetic energy eVbeV_b.
  • Dynamic resistance rd=ΔVΔIr_d = \dfrac{\Delta V}{\Delta I}, read from the I-V curve. A diode is not an ohmic conductor.

Junction relations

E=Vbd,rd=ΔVΔIE = \frac{V_b}{d}, \qquad r_d = \frac{\Delta V}{\Delta I}
  • VbV_bbarrier potential
  • ddwidth of the depletion layer
  • rdr_ddynamic resistance

Diagram · forward and reverse bias

Forward biaspn+−Ip to +, so Vₚ > Vₙlayer narrowsbarrier lowerlarge currentReverse biaspn−+I ≈ 0p to −, so Vₚ < Vₙlayer widensbarrier higheralmost no current

Shaded strip: the depletion layer. Dashed outline: its width with no bias. The battery's long plate is the + terminal. Check the sign: −1.0 V is higher than −1.5 V, so −1.0 V on the p-side and −1.5 V on the n-side is forward bias.

Worked example

On a silicon diode's forward curve, the voltage rises from 0.70 V to 0.75 V while the current rises from 10 mA to 20 mA. Find the dynamic resistance in this range.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2026 · NEET (UG) 2026 — 03 May 2026 · Q40Easy

Example 2 · Semiconductor Electronics · Semiconductors and the p-n Junction

Two statements are given below: A. When the forward bias voltage across a p-n junction diode increases above a certain threshold voltage, the diode current increases significantly. B. This current is called reverse saturation current. Choose the correct answer from the options given below:

Compare potentials, not signs

A diode is forward biased when its p-side is at the higher potential. p at −2-2 V and n at −6-6 V is forward bias even though both are negative.

The reverse current is a minority current

The few microamperes through a reverse-biased junction are carried by minority carriers, not majority carriers. The large current above the threshold in forward bias is not the reverse saturation current.

A silicon diode needs about 0.7 V

A silicon diode starts to conduct strongly at about 0.7 V, not at 0.1 to 0.3 V. The 0.2 V figure belongs to germanium.

Forward narrows, reverse widens

Forward bias makes the depletion layer thinner than in an unbiased junction; reverse bias makes it wider. So a reverse-biased diode has the widest layer and a forward-biased one the thinnest.

Concept 3 of 3: Diodes in circuits

Treat an ideal diode as a one-way switch. Forward biased, it is a closed switch with no voltage across it; reverse biased, it is an open switch and its branch carries no current. So first decide which way each diode is biased, then remove the blocked branches and solve what is left as an ordinary resistor circuit. A real diode also takes a small fixed voltage, about 0.7 V for silicon, which you subtract before using Ohm's law.

Definition

  • Ideal diode: forward biased, zero resistance (a short circuit); reverse biased, infinite resistance (an open circuit).
  • The diode symbol's arrow points from p to n, the way current can flow. The diode is forward biased when the end at the arrow's tail is at the higher potential.
  • A reverse-biased ideal diode in series with anything stops the current in that whole path.
  • Diode with a forward drop V0V_0: in series with R across a battery E, I=E−V0RI = \dfrac{E - V_0}{R}.
  • Diode with a forward resistance rfr_f: add rfr_f to the resistance of its branch.

Diode in series with a resistor

I=E−V0R  (forward),I=0  (reverse, ideal)I = \frac{E - V_0}{R}\ \ \text{(forward)}, \qquad I = 0\ \ \text{(reverse, ideal)}
  • V0V_0forward voltage drop of the diode
  • EEemf of the battery

Worked example

A silicon diode with a forward drop of 0.7 V is forward biased in series with a 200 Ω resistor across a 4.7 V battery. Find the current.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2026 · NEET (UG) 2026 — 03 May 2026 · Q3Moderate

Example 3 · Semiconductor Electronics · Semiconductors and the p-n Junction

The current II in the circuit shown below is: (All diodes are ideal and identical). The circuit has four parallel branches between the terminals of a 10 V battery: a 4 Ω4\,\Omega resistor in series with a forward-biased diode, a 3 Ω3\,\Omega resistor in series with a reverse-biased diode, a forward-biased diode in series with a 2 Ω2\,\Omega resistor, and a reverse-biased diode in series with a 5 Ω5\,\Omega resistor.

Decide each diode's bias first

A branch whose diode is reverse biased carries no current, so it drops out of the circuit. Solving as if every diode conducts gives a current that is too large.

Subtract the drop before dividing

With a real diode the current is E−V0R\dfrac{E - V_0}{R}, not ER\dfrac{E}{R}. The diode's own voltage is not available to the resistor.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (3)

  • Intrinsic and extrinsic semiconductors

    Carriers and conductivity

    nenh=ni2,I=eA(neve+nhvh),σ=e(neμe+nhμh)n_e n_h = n_i^{2}, \qquad I = eA(n_e v_e + n_h v_h), \qquad \sigma = e(n_e\mu_e + n_h\mu_h)
  • The p-n junction and its bias

    Junction relations

    E=Vbd,rd=ΔVΔIE = \frac{V_b}{d}, \qquad r_d = \frac{\Delta V}{\Delta I}
  • Diodes in circuits

    Diode in series with a resistor

    I=E−V0R  (forward),I=0  (reverse, ideal)I = \frac{E - V_0}{R}\ \ \text{(forward)}, \qquad I = 0\ \ \text{(reverse, ideal)}

Watch out for (9)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper