PYQ Vault

NEET Physics · Thermal Properties of Matter

Expansion and Specific Heat

How lengths, areas and volumes grow when a body is heated (ΔL = αLΔT, γ = 3α), then how much heat a body takes for a rise in temperature or a change of state.

Why this matters

Two NEET questions, both from 2024 or later. Re-NEET 2026 asks how much the volume of a heated metal sphere grows, given only the linear coefficient. Re-NEET 2024 asks why water is used as a coolant in a nuclear reactor.

Concept 1 of 2: Linear, area and volume expansion

Heat a solid and its particles vibrate more and push each other a little further apart. Every length in the body grows by the same small fraction, αΔT. An area has two lengths in it, so it grows by about twice that fraction; a volume has three, so it grows by about three times. A hole in a plate grows too, exactly as the piece of metal that would fill it.

Definition

  • Length: ΔL=αLΔT\Delta L = \alpha L\Delta T, where α\alpha is the coefficient of linear expansion.
  • Area: ΔA=2αAΔT\Delta A = 2\alpha A\Delta T. Volume: ΔV=γVΔT\Delta V = \gamma V\Delta T with γ=3α\gamma = 3\alpha for a solid.
  • A hole or a gap expands as if it were filled with the same material.
  • Water is different between 0 °C and 4 °C: it contracts on heating, so its density is greatest at 4 °C.
  • Celsius and Fahrenheit: tF=95tC+32t_F = \dfrac{9}{5}t_C + 32. A change of 1 °C equals a change of 1 K.

Thermal expansion

ΔL=αLΔT,ΔA=2αAΔT,ΔV=3αVΔT\Delta L = \alpha L\Delta T, \qquad \Delta A = 2\alpha A\Delta T, \qquad \Delta V = 3\alpha V\Delta T
  • α\alphacoefficient of linear expansion
  • γ\gammacoefficient of volume expansion, 3α for a solid
  • ΔT\Delta Trise in temperature
Temperature (degrees C)Density4 Cmax density0 C

Water is densest at 4 degrees C: between 0 and 4 degrees C it contracts on heating (anomalous), so colder water and ice float — which is why ponds freeze top-down and fish survive below.

Worked example

A steel plate has a round hole of diameter 10 cm at 20 °C. The plate is heated to 120 °C. Find the new diameter of the hole. (α=1.2×10−5 K−1\alpha = 1.2 \times 10^{-5}\ \text{K}^{-1})
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2026 · Re-NEET (UG) 2026 — 21 Jun 2026 · Q24Easy

Example 1 · Thermal Properties of Matter · Expansion and Specific Heat

The temperature of a metallic sphere of radius R is increased by a small amount ΔT\Delta T. If the linear coefficient of thermal expansion of the metal is α\alpha, the approximate increase in the volume of the sphere is :

A volume grows by 3α, not α

The volume of a solid grows by 3αVΔT3\alpha V\Delta T and an area by 2αAΔT2\alpha A\Delta T. Using α\alpha alone gives an answer three or two times too small, and that value is usually one of the options.

A hole grows when the plate is heated

The metal around a hole expands outward and carries the edge of the hole with it. The hole grows exactly as a disc of the same metal would.

Water shrinks between 0 °C and 4 °C

Most liquids expand on heating, but water contracts from 0 °C to 4 °C. Its density is greatest at 4 °C, which is why a lake freezes from the top down.

Concept 2 of 2: Specific heat, calorimetry and latent heat

Different materials need different amounts of heat for the same rise in temperature. The specific heat capacity says how much heat one kilogram needs for a rise of one kelvin. Water's is very high, so it soaks up a lot of heat while warming only a little. When a substance melts or boils, the heat it takes goes into changing its state, and its temperature stays fixed until the change is complete.

Definition

  • Heat for a rise in temperature: Q=mcΔTQ = mc\Delta T, where c is the specific heat capacity. The heat capacity of a whole body is S=mcS = mc.
  • Water has the highest specific heat of common substances, about 4186 J kg⁻¹ K⁻¹. That is why it is used as a coolant in car radiators and nuclear reactors, and in hot water bags.
  • Heat for a change of state at constant temperature: Q=mLQ = mL, where L is the latent heat (of fusion for melting, of vaporisation for boiling).
  • For ice, Lf≈3.33×105 J kg−1L_f \approx 3.33 \times 10^{5}\ \text{J kg}^{-1}; for water, Lv≈22.6×105 J kg−1L_v \approx 22.6 \times 10^{5}\ \text{J kg}^{-1}.
  • Calorimetry: when hot and cold bodies are mixed and no heat escapes, heat lost by the hot body = heat gained by the cold body.

Heat and change of state

Q=mcΔT,Q=mL,heat lost=heat gainedQ = mc\Delta T, \qquad Q = mL, \qquad \text{heat lost} = \text{heat gained}
  • ccspecific heat capacity
  • LLlatent heat of the change of state

Worked example

100 g of water at 80 °C is mixed with 200 g of water at 20 °C. No heat escapes. What is the final temperature?
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2024 · Re-NEET (UG) 2024 — 23 Jun 2024 · Q26Easy

Example 2 · Thermal Properties of Matter · Expansion and Specific Heat

Water is used as a coolant in a nuclear reactor because of its

No temperature rise while the state changes

While ice melts or water boils, the heat supplied goes into the change of state, Q=mLQ = mL. The temperature stays fixed until the change is complete, so do not use mcΔTmc\Delta T for that stage.

Specific heat is per kilogram

Specific heat c belongs to the material; heat capacity mcmc belongs to the whole body. A large pot of water and a cup of water have the same specific heat but very different heat capacities.

A high specific heat means a slow rise

A substance with a high specific heat warms up slowly for the heat it takes. That is what makes water a good coolant: it carries away a lot of heat for a small rise in its own temperature.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (2)

  • Linear, area and volume expansion

    Thermal expansion

    ΔL=αLΔT,ΔA=2αAΔT,ΔV=3αVΔT\Delta L = \alpha L\Delta T, \qquad \Delta A = 2\alpha A\Delta T, \qquad \Delta V = 3\alpha V\Delta T
  • Specific heat, calorimetry and latent heat

    Heat and change of state

    Q=mcΔT,Q=mL,heat lost=heat gainedQ = mc\Delta T, \qquad Q = mL, \qquad \text{heat lost} = \text{heat gained}

Watch out for (6)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper