PYQ Vault

NEET Physics · Thermodynamics

Heat, Work and the First Law

The variables that describe a state, heat and work as energy in transfer, the first law ΔQ = ΔU + ΔW, and work as the area under a P-V graph.

Why this matters

Five NEET questions from 2024 to 2026. One picks the variables that describe an equilibrium state (Re-NEET 2024), two use the first law (two pistons pushed out by equal heat in 2025, a heater and the work a system does in 2026), and two read work off a P-V graph (the work along one side of a cycle in 2024, the heat taken in over a whole cycle in Re-NEET 2026).

Concept 1 of 3: State variables and thermal equilibrium

A gas in equilibrium is fully described by a few numbers: its pressure, volume and temperature. These are state variables: they depend only on the state the gas is in, not on how it got there. Heat and work are different. They are energy on the move, and how much of each flows depends on the path taken from one state to another.

Definition

  • Zeroth law: two systems each in thermal equilibrium with a third are in thermal equilibrium with each other. This is what makes temperature a meaningful quantity.
  • An equilibrium state is described by state variables such as pressure, volume, temperature and internal energy. An equation of state links them; for an ideal gas it is PV=μRTPV = \mu RT.
  • Heat is energy that flows because of a temperature difference. Work is energy transferred by other means, such as a moving piston. Neither is held by a body, so neither is a state variable.
  • Intensive variables do not depend on the amount (pressure, temperature, density). Extensive ones do (volume, mass, internal energy).
QuantityState variable?Why
Pressure PYesfixed by the equilibrium state
Volume VYesfixed by the equilibrium state
Temperature TYesfixed by the equilibrium state
Internal energy UYesdepends only on the state; for an ideal gas only on T
Heat QNodepends on the path from one state to anotherQ
Re-NEET 2024: pick the quantities that describe an equilibrium state from pressure, total heat, temperature, volume and work done.
Work WNodepends on the path; it is the area under the P-V curve
P, V, T and U describe a state; heat and work describe a change between states.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2024 · Re-NEET (UG) 2024 — 23 Jun 2024 · Q33Easy

Example 1 · Thermodynamics · Heat, Work and the First Law

The equilibrium state of a thermodynamic system is described by A. Pressure B. Total heat C. Temperature D. Volume E. Work done Choose the most appropriate answer from the options given below.

A body holds internal energy, not heat

Heat is energy on its way from a hotter body to a colder one. Once it arrives it is part of the internal energy, so 'the heat in a body' is not a state variable.

Work depends on the path

Two paths between the same two states can need different amounts of work, so work done can never describe a state.

Concept 2 of 3: The first law of thermodynamics

The first law is energy conservation for heat. Heat given to a gas does two jobs: part of it raises the internal energy, and the rest is spent as work when the gas pushes its surroundings back. Whatever goes in must be accounted for by these two.

Definition

  • ΔQ=ΔU+ΔW\Delta Q = \Delta U + \Delta W.
  • Signs: ΔQ\Delta Q is positive for heat given to the system. ΔW\Delta W is positive for work done by the system, negative for work done on it.
  • At constant pressure the work done by a gas is ΔW=PΔV\Delta W = P\Delta V.
  • For an ideal gas U depends only on T: ΔU=μCvΔT\Delta U = \mu C_v\Delta T for any process.
  • The law holds moment by moment too: heat supplied per second = rise in internal energy per second + work done per second.

First law

ΔQ=ΔU+ΔW,ΔW=PΔV (P fixed),ΔU=μCvΔT\Delta Q = \Delta U + \Delta W, \qquad \Delta W = P\Delta V\ (P\ \text{fixed}), \qquad \Delta U = \mu C_v\Delta T
  • ΔQ\Delta Qheat given to the system
  • ΔU\Delta Urise in internal energy
  • ΔW\Delta Wwork done by the system

Worked example

A gas takes in 500 J of heat and expands at a constant pressure of 1.0×1051.0 \times 10^{5} Pa from 2 litres to 4 litres. Find the work done by the gas and the change in its internal energy.
Practise this conceptself-check · 3 quick reps

The same idea in a real exam question:

NEET · 2025 · NEET (UG) 2025 — 04 May 2025 · Q41Moderate

Example 2 · Thermodynamics · Heat, Work and the First Law

Two gases AA and BB are filled at the same pressure in separate cylinders with movable pistons of radius rAr_A and rBr_B, respectively. On supplying an equal amount of heat to both the systems reversibly under constant pressure, the pistons of gas AA and BB are displaced by 16 cm and 9 cm, respectively. If the change in their internal energy is the same, then the ratio rArB\frac{r_A}{r_B} is equal to

Work done on the gas is negative

In ΔQ=ΔU+ΔW\Delta Q = \Delta U + \Delta W, ΔW\Delta W is work done by the gas. When 300 J of work is done on the gas, put ΔW=−300\Delta W = -300 J.

Heat given out is negative

A system that loses 200 J of heat has ΔQ=−200\Delta Q = -200 J. Keeping it positive flips the answer for the internal energy.

Concept 3 of 3: Work as the area under a P-V graph

When a gas pushes a piston out a little, the work it does is its pressure times the small change in volume. Add up all these small pieces as the gas expands and you get the area under its curve on a P-V graph. So a P-V graph turns work into geometry: a rectangle, a triangle or a trapezium.

Definition

  • Work done by a gas = area under its P-V curve between the starting and final volumes. Positive when the volume grows, negative when it shrinks.
  • Constant volume (a vertical line): no area, so ΔW=0\Delta W = 0.
  • Constant pressure (a horizontal line): ΔW=P(V2−V1)\Delta W = P(V_2 - V_1).
  • Cycle: the gas returns to its start, so ΔU=0\Delta U = 0 and the net heat taken in equals the net work, the area enclosed by the loop. With P up and V across, a clockwise loop means positive work by the gas; anticlockwise, negative.

Work from a graph

ΔW=area under the P-V curve,ΔQcycle=ΔWcycle=area of the loop\Delta W = \text{area under the } P\text{-}V \text{ curve}, \qquad \Delta Q_{cycle} = \Delta W_{cycle} = \text{area of the loop}

Diagram · work as the signed area under a gas's path

P (kPa)200500V (L)15ABA → B+1400 Jrightward15BCB → C−800 Jleftward15ABCW = 0whole loop+600 Jclockwise
Legkindwork by the gas
A → Bstraight, expansion½(500 + 200) × (5 − 1) = +1400 J
B → Cconstant pressure, compression200 × (1 − 5) = −800 J
C → Aconstant volume0
Loopclockwise1400 − 800 + 0 = +600 J

kPa × L = J. A leg to the right (expansion) adds its area, a leg to the left (compression) takes its area away, however high the pressure, and a vertical leg adds nothing. Round a loop the net work is the enclosed area, ½ × 4 × 300 = 600 J: positive when the loop runs clockwise, because the gas expands at the higher pressure and is compressed at the lower.

Worked example

A gas expands from 1 litre at 1×1051 \times 10^{5} Pa to 3 litres at 3×1053 \times 10^{5} Pa along a straight line on its P-V graph. How much work does it do?
Practise this conceptself-check · 3 quick reps

The same idea in a real exam question:

NEET · 2024 · NEET (UG) 2024 — 05 May 2024 · Q18Easy

Example 3 · Thermodynamics · Heat, Work and the First Law

A thermodynamic system is taken through the cycle abcdaabcda. The work done by the gas along the path bcbc is:

A vertical line does no work

A step at constant volume is a vertical line on a P-V graph. It has no area under it, so the work along it is zero however much the pressure changes.

Net heat over a cycle is not zero

Only the internal energy returns to its start after a cycle. The net heat taken in equals the net work, the area of the loop.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (2)

  • The first law of thermodynamics

    First law

    ΔQ=ΔU+ΔW,ΔW=PΔV (P fixed),ΔU=μCvΔT\Delta Q = \Delta U + \Delta W, \qquad \Delta W = P\Delta V\ (P\ \text{fixed}), \qquad \Delta U = \mu C_v\Delta T
  • Work as the area under a P-V graph

    Work from a graph

    ΔW=area under the P-V curve,ΔQcycle=ΔWcycle=area of the loop\Delta W = \text{area under the } P\text{-}V \text{ curve}, \qquad \Delta Q_{cycle} = \Delta W_{cycle} = \text{area of the loop}

Reference tables (1)

State variables and thermal equilibrium6 rows
QuantityState variable?Why
Pressure PYesfixed by the equilibrium state
Volume VYesfixed by the equilibrium state
Temperature TYesfixed by the equilibrium state
Internal energy UYesdepends only on the state; for an ideal gas only on T
Heat QNodepends on the path from one state to anotherQ
Re-NEET 2024: pick the quantities that describe an equilibrium state from pressure, total heat, temperature, volume and work done.
Work WNodepends on the path; it is the area under the P-V curve
P, V, T and U describe a state; heat and work describe a change between states.

Watch out for (6)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper