PYQ Vault

NEET Physics · Thermodynamics

Processes and Heat Engines

Isothermal, adiabatic, isochoric and isobaric processes with the work and heat in each, then heat engines, refrigerators, the second law and the Carnot engine.

Why this matters

Three NEET questions from 2022 to 2026. Two are about processes: picking the adiabatic curve from four drawn from one state (2022) and the work done in an adiabatic expansion from its fall in temperature (Re-NEET 2026). One finds the sink temperature of a Carnot engine from its efficiency (2023).

Concept 1 of 2: Isothermal, adiabatic, isochoric and isobaric processes

Most questions fix one thing and let the rest change. Keep the temperature fixed and the process is isothermal; let no heat in or out and it is adiabatic; fix the volume and it is isochoric; fix the pressure and it is isobaric. Apply the first law to each, and each gets its own rule for work and heat.

Definition

  • Isothermal (T fixed): PVPV constant, ΔU=0\Delta U = 0, so ΔQ=ΔW=μRTln⁡V2V1\Delta Q = \Delta W = \mu RT\ln\dfrac{V_2}{V_1}.
  • Adiabatic (no heat, ΔQ=0\Delta Q = 0): PVγPV^{\gamma} constant. The work done by the gas comes out of its internal energy: ΔW=μR(T1−T2)γ−1=−ΔU\Delta W = \dfrac{\mu R(T_1 - T_2)}{\gamma - 1} = -\Delta U. An adiabatic expansion cools a gas.
  • Isochoric (V fixed): ΔW=0\Delta W = 0, so ΔQ=ΔU=μCvΔT\Delta Q = \Delta U = \mu C_v\Delta T.
  • Isobaric (P fixed): ΔW=PΔV=μRΔT\Delta W = P\Delta V = \mu R\Delta T, and ΔQ=μCpΔT\Delta Q = \mu C_p\Delta T.
  • On a P-V graph through one point: isobaric is horizontal, isochoric vertical, and the adiabatic curve is steeper than the isothermal one (its slope is γ\gamma times as large).

Processes

PVγ=constant,Wadiabatic=μR(T1−T2)γ−1,Wisothermal=μRTln⁡V2V1PV^{\gamma} = \text{constant}, \qquad W_{adiabatic} = \frac{\mu R(T_1 - T_2)}{\gamma - 1}, \qquad W_{isothermal} = \mu RT\ln\frac{V_2}{V_1}
  • γ\gammaratio of specific heats Cp over Cv
  • μ\munumber of moles
V (volume)Pstartisobaric (P fixed)isochoric (V fixed)isothermal (T fixed)adiabatic (Q = 0)

From one start: isobaric holds P, isochoric holds V, isothermal follows PV = const, and the adiabatic curve (no heat exchange) is steeper than the isothermal one.

Worked example

A gas at 1×1051 \times 10^{5} Pa with γ=53\gamma = \dfrac{5}{3} is compressed adiabatically to one-eighth of its volume. What is its final pressure?
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2026 · Re-NEET (UG) 2026 — 21 Jun 2026 · Q17Moderate

Example 1 · Thermodynamics · Processes and Heat Engines

In an adiabatic expansion, the temperature of one mole of an ideal monatomic gas (γ=5/3\gamma = 5/3) decreases from 60 K to 50 K. The work done by the gas in the process is : (Take the universal gas constant as R=8.3 J mol−1K−1R = 8.3\ \text{J mol}^{-1}\text{K}^{-1})

Isothermal means no change in internal energy, not no heat

In an isothermal process heat does flow: all of it becomes work, ΔQ=ΔW\Delta Q = \Delta W. It is the adiabatic process that has ΔQ=0\Delta Q = 0.

The adiabatic curve is the steeper one

Through the same point, the adiabatic curve falls faster than the isothermal curve, because its slope is γ\gamma times larger and γ>1\gamma > 1.

In an adiabatic process the temperature changes

No heat flows, but the temperature is not fixed: a gas cools as it expands adiabatically and warms when it is compressed.

Concept 2 of 2: Heat engines, refrigerators and the Carnot engine

A heat engine takes heat from a hot body, turns part of it into work, and throws the rest away to a cold body. The second law says that some heat must always be thrown away, so no engine is 100% efficient. A refrigerator runs the other way: work is spent to pull heat out of a cold place. The best possible engine between two temperatures is the reversible Carnot engine.

Definition

  • Heat engine: takes Q1Q_1 from the source, does work W, rejects Q2Q_2 to the sink. W=Q1−Q2W = Q_1 - Q_2 and efficiency η=WQ1=1−Q2Q1\eta = \dfrac{W}{Q_1} = 1 - \dfrac{Q_2}{Q_1}.
  • Refrigerator: takes Q2Q_2 from the cold inside using work W and gives Q1=Q2+WQ_1 = Q_2 + W to the room. Coefficient of performance α=Q2W\alpha = \dfrac{Q_2}{W}.
  • Second law: no engine can turn all the heat it takes in into work (Kelvin-Planck), and no refrigerator can move heat from a colder to a hotter body with no work done (Clausius).
  • Carnot engine: a reversible engine between a source at T1T_1 and a sink at T2T_2, made of two isothermal and two adiabatic steps. Q2Q1=T2T1\dfrac{Q_2}{Q_1} = \dfrac{T_2}{T_1}, so η=1−T2T1\eta = 1 - \dfrac{T_2}{T_1} with T in kelvin.
  • No engine between the same two temperatures beats a Carnot engine, and its efficiency does not depend on the working substance.

Engines

η=WQ1=1−Q2Q1,ηCarnot=1−T2T1,α=Q2W\eta = \frac{W}{Q_1} = 1 - \frac{Q_2}{Q_1}, \qquad \eta_{Carnot} = 1 - \frac{T_2}{T_1}, \qquad \alpha = \frac{Q_2}{W}
  • Q1Q_1heat taken from the source
  • Q2Q_2heat given to the sink
  • T1,T2T_1, T_2source and sink temperatures in kelvin

Worked example

An engine takes 1000 J of heat from its source and rejects 600 J to its sink in each cycle. Find the work done per cycle and the efficiency.
Practise this conceptself-check · 3 quick reps

The same idea in a real exam question:

NEET · 2023 · NEET (UG) 2023 — 07 May 2023 · Q31Moderate

Example 2 · Thermodynamics · Processes and Heat Engines

A Carnot engine has an efficiency of 50%50\% when its source is at a temperature 327∘C327^\circ C. The temperature of the sink is

Put the temperatures in kelvin

A Carnot engine between 227 °C and 27 °C has η=1−300500=40%\eta = 1 - \dfrac{300}{500} = 40\%, not 1−272271 - \dfrac{27}{227}, which is about 88%.

No engine is 100% efficient

Even a Carnot engine must reject some heat to its sink. Its efficiency would be 1 only with a sink at 0 K.

A refrigerator's figure is not an efficiency

The coefficient of performance Q2/WQ_2/W is not an efficiency. It can be larger than 1, and for a refrigerator it usually is.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (2)

  • Isothermal, adiabatic, isochoric and isobaric processes

    Processes

    PVγ=constant,Wadiabatic=μR(T1−T2)γ−1,Wisothermal=μRTln⁡V2V1PV^{\gamma} = \text{constant}, \qquad W_{adiabatic} = \frac{\mu R(T_1 - T_2)}{\gamma - 1}, \qquad W_{isothermal} = \mu RT\ln\frac{V_2}{V_1}
  • Heat engines, refrigerators and the Carnot engine

    Engines

    η=WQ1=1−Q2Q1,ηCarnot=1−T2T1,α=Q2W\eta = \frac{W}{Q_1} = 1 - \frac{Q_2}{Q_1}, \qquad \eta_{Carnot} = 1 - \frac{T_2}{T_1}, \qquad \alpha = \frac{Q_2}{W}

Watch out for (6)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper