PYQ Vault

NEET Physics · Work, Energy and Power

Power

Power as the rate of doing work, P = W/t, the power of falling or pumped water and a machine's efficiency, then instantaneous power P = F·v.

Why this matters

Four NEET questions from 2021 to 2026. Two use average power: a turbine run by falling water with 10% lost (NEET 2021) and a crane lifting a load in a given time (NEET 2026). Two use P = F·v: a lift moving up at steady speed against its weight and friction (NEET 2022), and a particle whose position is given as a function of time (NEET 2024).

Concept 1 of 2: Power, efficiency and energy per second

Power tells you how fast work is done. Two people who lift the same load to the same height do the same work, but the quicker one has more power. Falling water is a steady stream of energy: every second a certain mass drops a height h and gives up mgh. No machine passes on all the energy it takes in; its efficiency is the share that comes out as useful work.

Definition

  • Average power: Pav=WtP_{\text{av}} = \dfrac{W}{t}. Unit: the watt, 1 W = 1 J/s. 1 horsepower = 746 W.
  • Lifting a mass m through a height h at steady speed in a time t: P=mghtP = \dfrac{mgh}{t}.
  • Water falling or pumped at a rate dmdt\dfrac{dm}{dt} (kg per second) through a height h: P=dmdt ghP = \dfrac{dm}{dt}\,gh.
  • Efficiency: η=PoutPin\eta = \dfrac{P_{\text{out}}}{P_{\text{in}}}, so useful output =η×= \eta \times input.
  • The kilowatt hour is a unit of energy, not power: 1 kWh = 3.6×1063.6 \times 10^{6} J.

Power

Pav=Wt,P=dmdt gh,η=PoutPinP_{\text{av}} = \frac{W}{t}, \qquad P = \frac{dm}{dt}\,gh, \qquad \eta = \frac{P_{\text{out}}}{P_{\text{in}}}
  • dmdt\dfrac{dm}{dt}mass moved each second
  • η\etaefficiency, useful output over input

Worked example

A pump lifts 600 kg of water into a tank 20 m high in 4 minutes. Its efficiency is 50%. What power does it draw? (g = 10 m/s²)
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2026 · NEET (UG) 2026 — 03 May 2026 · Q24Easy

Example 1 · Work, Energy and Power · Power

The power of a crane, which lifts a mass of 1000 kg to a height of 20 m in 10 s is: (g=9.8g = 9.8 m/s2^2)

A kilowatt hour is energy

kWh measures energy (power times time), not power. 1 kWh = 3.6×1063.6 \times 10^{6} J.

Multiply by the efficiency for output, divide for input

Useful output = efficiency times input. To find the input from a known output, divide by the efficiency: an engine 60% efficient giving 2 kW takes in about 3.3 kW, not 1.2 kW.

Time changes the power, not the work

Lifting the same load to the same height takes the same work, mgh, however long it takes. A slower lift needs less power, not less work.

Concept 2 of 2: Instantaneous power, P = F·v

At any instant, the work a force does each second is the force times the distance it moves the body in that second, that is the force times the velocity. Only the part of the force along the velocity counts. A motor pulling a load at steady speed still works hard: the net force is zero, but the motor's own force must balance the weight and the friction, and its power is that force times the speed.

Definition

  • P=dWdt=F⃗⋅v⃗=Fvcos⁡θP = \dfrac{dW}{dt} = \vec{F}\cdot\vec{v} = Fv\cos\theta.
  • In components: P=Fxvx+Fyvy+FzvzP = F_xv_x + F_yv_y + F_zv_z.
  • Steady speed: the driving force equals the total of the forces against the motion (weight on a rise, friction), so P=(that force)×vP = (\text{that force}) \times v.
  • If the position is given as a function of time, find v=dxdtv = \dfrac{dx}{dt} first.
  • P positive: the force is speeding the body up. P negative: it is slowing it down. P zero: the force is at right angles to the motion.

Instantaneous power

P=F⃗⋅v⃗=Fvcos⁡θP = \vec{F}\cdot\vec{v} = Fv\cos\theta

Worked example

A force F⃗=(4i^+3j^)\vec{F} = (4\hat{i} + 3\hat{j}) N acts on a body moving with velocity v⃗=(2i^−j^+5k^)\vec{v} = (2\hat{i} - \hat{j} + 5\hat{k}) m/s. Find the power delivered by the force.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2022 · NEET (UG) 2022 — 17 Jul 2022 · Q15Moderate

Example 2 · Work, Energy and Power · Power

An electric lift with a maximum load of 2000 kg (lift + passengers) is moving up with a constant speed of 1.5 ms−1^{-1}. The frictional force opposing the motion is 3000 N. The minimum power delivered by the motor to the lift in watts is : (g=10(g = 10 m s−2)^{-2})

Steady speed does not mean zero motor force

At constant speed the net force is zero, but the motor still supplies a force equal to the weight plus the friction. The power is that force times the speed, not zero.

Find the velocity before the power

When the position is given as a function of time, differentiate it to get v, then use P=FvP = Fv. Multiplying the force by the position is a common slip.

Power is a dot product

Only the part of the force along the velocity delivers power: P=Fvcos⁡θP = Fv\cos\theta. Multiplying the magnitudes overstates it whenever the force is at an angle.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (2)

  • Power, efficiency and energy per second

    Power

    Pav=Wt,P=dmdt gh,η=PoutPinP_{\text{av}} = \frac{W}{t}, \qquad P = \frac{dm}{dt}\,gh, \qquad \eta = \frac{P_{\text{out}}}{P_{\text{in}}}
  • Instantaneous power, P = F·v

    Instantaneous power

    P=F⃗⋅v⃗=Fvcos⁡θP = \vec{F}\cdot\vec{v} = Fv\cos\theta

Watch out for (6)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper