PYQ Vault

NEET Physics · Work, Energy and Power

Work and the Work-Energy Theorem

Work as the dot product W = F·d, work by a force that changes with position as the area under its graph, and the work-energy theorem: the net work on a body equals its change in kinetic energy.

Why this matters

Three NEET questions, all from 2024 or later. One finds the kinetic energy left after a force with a sideways part does work (Re-NEET 2024), one compares two cars' braking forces from their kinetic energies and stopping distances (NEET 2025), and one finds the work done by friction whose coefficient falls steadily along the path (Re-NEET 2026).

Concept 1 of 2: Work done by a constant and a variable force

A force does work when the body it acts on moves. Only the part of the force along the motion counts: a force at right angles to the motion does no work at all, however large it is. A force that helps the motion does positive work, one that opposes it, like friction, does negative work. When the force changes as the body moves, cut the path into tiny steps, find the work on each, and add them up. That sum is the area under the force-position graph.

Definition

  • Constant force: W=F⃗⋅d⃗=Fdcos⁡θW = \vec{F}\cdot\vec{d} = Fd\cos\theta, where θ\theta is the angle between the force and the displacement. Work is a scalar, measured in joules (1 J = 1 N m).
  • θ<90∘\theta < 90^{\circ}: positive work. θ=90∘\theta = 90^{\circ}: zero work. θ>90∘\theta > 90^{\circ}: negative work.
  • In components: W=Fxdx+Fydy+FzdzW = F_xd_x + F_yd_y + F_zd_z, with the displacement d⃗=r⃗final−r⃗initial\vec{d} = \vec{r}_{\text{final}} - \vec{r}_{\text{initial}}.
  • No displacement, no work: pushing a wall that does not move does no work on it.
  • Variable force along x: W=∫x1x2F dxW = \displaystyle\int_{x_1}^{x_2} F\,dx, the area under the F-x graph. Area below the x-axis counts as negative.

Work

W=F⃗⋅d⃗=Fdcos⁡θ,W=∫x1x2F dxW = \vec{F}\cdot\vec{d} = Fd\cos\theta, \qquad W = \int_{x_1}^{x_2} F\,dx
  • θ\thetaangle between the force and the displacement
  • d⃗\vec{d}displacement, final position minus initial position
FF cos θF sin θθdisplacement dOnly F cos θ is along d, so W = F d cos θ

Work counts only the part of the force along the displacement. The vertical component F sin θ is perpendicular to motion and does no work.

Worked example

A constant force F⃗=(3i^+4j^)\vec{F} = (3\hat{i} + 4\hat{j}) N moves a body from the point (1 m, 2 m) to the point (4 m, 1 m). Find the work done by the force.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2026 · Re-NEET (UG) 2026 — 21 Jun 2026 · Q1Moderate

Example 1 · Work, Energy and Power · Work and the Work-Energy Theorem

A particle of mass M moves along a horizontal x axis from x=0x=0 to x=Lx=L. The coefficient of kinetic friction varies as a function of x as μk(x)=μ0−αx\mu_k(x) = \mu_0 - \alpha x, where μ0\mu_0, α\alpha are constants of appropriate dimensions, so that μk(L)=0\mu_k(L)=0. The total work done by the frictional force during the motion is nμ0MgLn\mu_0 MgL, where g is the acceleration due to gravity. The value of n is :

Only the part along the motion does work

A force with a part at right angles to the displacement does no work through that part. Use W=F⃗⋅d⃗W = \vec{F}\cdot\vec{d}, never the product of the two magnitudes.

Displacement is final minus initial position

When a body moves from r⃗1\vec{r}_1 to r⃗2\vec{r}_2, the work is F⃗⋅(r⃗2−r⃗1)\vec{F}\cdot(\vec{r}_2 - \vec{r}_1). Taking the dot product with r⃗2\vec{r}_2 alone gives a wrong answer.

Area below the axis is negative work

On an F-x graph, the parts where the force is negative subtract from the total. Adding every area as positive overstates the work.

Concept 2 of 2: The work-energy theorem

Kinetic energy is the energy a body has because it is moving. Every force on the body either adds to it (positive work) or takes from it (negative work). Add up the work of all the forces together and you get exactly the change in kinetic energy. So if you know the work, you know the new speed, and if you know the speeds, you know the work, without ever finding the acceleration.

Definition

  • Kinetic energy: K=12mv2K = \tfrac{1}{2}mv^{2}. It is never negative, and it goes as the square of the speed.
  • Work-energy theorem: Wnet=Kf−KiW_{\text{net}} = K_f - K_i, where WnetW_{\text{net}} is the work done by ALL the forces: applied force, friction, gravity and the rest.
  • It holds for a variable force too, so it works with an F-x graph or an integral.
  • A constant retarding force F stops a body of kinetic energy K in a distance s=KFs = \dfrac{K}{F}, because Fs=KFs = K.
  • Zero net work means the speed at the end equals the speed at the start.

Work-energy theorem

Wnet=Kf−Ki,K=12mv2W_{\text{net}} = K_f - K_i, \qquad K = \tfrac{1}{2}mv^{2}

Worked example

A 2 kg block at rest is pulled 4 m along a rough floor by a horizontal force of 13 N. Friction on it is 4 N. Find its speed at the end.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2025 · NEET (UG) 2025 — 04 May 2025 · Q5Easy

Example 2 · Work, Energy and Power · Work and the Work-Energy Theorem

The kinetic energies of two similar cars AA and BB are 100 J and 225 J respectively. On applying breaks, car AA stops after 1000 m and car BB stops after 1500 m. If FAF_A and FBF_B are the forces applied by the breaks on cars AA and BB respectively, then the ratio of FAFB\frac{F_A}{F_B} is

Count the work of every force

The theorem uses the net work. Leaving out friction or gravity and using only the applied force gives too large a change in kinetic energy.

Kinetic energy goes as the square of the speed

Doubling the speed makes the kinetic energy four times, not two times. Halving the speed leaves one quarter.

Stopping distance grows with kinetic energy

For the same braking force, s=K/Fs = K/F. A car at twice the speed has four times the kinetic energy, so it needs four times the distance to stop.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (2)

  • Work done by a constant and a variable force

    Work

    W=F⃗⋅d⃗=Fdcos⁡θ,W=∫x1x2F dxW = \vec{F}\cdot\vec{d} = Fd\cos\theta, \qquad W = \int_{x_1}^{x_2} F\,dx
  • The work-energy theorem

    Work-energy theorem

    Wnet=Kf−Ki,K=12mv2W_{\text{net}} = K_f - K_i, \qquad K = \tfrac{1}{2}mv^{2}

Watch out for (6)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper