PYQ Vault

SSC CGL Tier II Maths · Time and Work

Pipes and Cisterns

A pipe that fills is a worker and a pipe or leak that empties is a worker doing negative work: net the rates, and when pipes take turns, watch for the tank finishing partway through a turn.

Why this matters

8 questions in the Tier II bank, 2 EASY and 6 MODERATE: the hardest page of the chapter. Leaks, pipes shut early and pipes opened in turn are the twists that make them MODERATE.

Concept 1 of 2: Inlets and outlets together

A pipe that fills is a worker; a pipe or leak that empties is a worker doing negative work. Add the filling rates, take away the emptying ones, and the net rate gives the time.

Definition

  • Net rate == filling rates −- emptying rates, as parts of the tank per hour (or units per hour).
  • A tap that fills in a hours alone and in b hours with a leak: the leak alone empties the full tank in abb−a\frac{ab}{b - a} hours.
  • A pipe shut before the end: write each pipe's running time in terms of the total time T.
  • When a pipe's share of the tank per minute and its litres per minute are both known, the tank's size follows.
  • Flow through round taps goes with the square of the diameter.

A leak from two fill times

leak alone=abb−a\text{leak alone} = \frac{ab}{b - a}
  • a,ba, bfill time without the leak, and with it

Animation · inlets and an outlet, open together

0204060A: +6B: +4C: −3units an hourhours8 4/7in the tank60 of 60net: 6 + 4 − 3 = 7 units an hour
  1. The tank as 60 units: Take the tank as 60 units. A adds 60 ÷ 10 = 6 units an hour, B adds 60 ÷ 15 = 4, and C takes away 60 ÷ 20 = 3.
  2. After 1 hour: 6 + 4 − 3 = 7 units stay in the tank. That is the net rate, 7 units an hour.
  3. After 4 hours: 4 × 7 = 28 units are in the tank.
  4. After 8 hours: 8 × 7 = 56 units are in, so 4 units are left to fill.
  5. Full: The last 4 units take 4/7 of an hour. Time = 60 ÷ 7 = 8 4/7 hours.

Net rate = 6 + 4 − 3 = 7 units an hour, so time = 60 ÷ 7 hours.

Worked example

Pipe A fills a tank in 10 hours and pipe B in 15 hours, while pipe C empties it in 20 hours. All three are opened together. When is the tank full?
Practise this conceptself-check · 3 quick reps

The same idea in a real exam question:

SSC CGL Tier II · 2020 · Tier II (CGL 2020), 3 Feb 2022 · Q53Easy

Example 1 · Time and Work · Pipes and Cisterns

Two pipes A and B can fill a tank in 12 minutes and 24 minutes, respectively, while a third pipe C can empty the full tank in 32 minutes. All the three pipes are opened simultaneously. However, pipe C is closed 2 minutes before the tank is filled. In how much time (in minutes) will the tank be full?

Adding a leak's rate

A leak works AGAINST the inlets. A 6-hour tap with a 24-hour leak fills at 16−124\frac{1}{6} - \frac{1}{24}, not 16+124\frac{1}{6} + \frac{1}{24}.

Concept 2 of 2: Pipes opened in turn

Pipes opened an hour at a time work like workers taking turns. The difference is that when an emptying pipe is in the cycle, the tank can reach full or empty partway through a turn, so check the end of each turn.

Definition

  • Units per cycle == the sum of each turn's units, with an outlet counted as negative.
  • The tank finishes during the turn that crosses the line, which may be before the cycle ends.
  • So stop counting whole cycles once the next turn alone could finish the job, and step turn by turn from there.

Net change in one cycle

net per cycle=inlet units−outlet units\text{net per cycle} = \text{inlet units} - \text{outlet units}

Worked example

Pipe A fills a tank in 6 hours and pipe B in 8 hours. They are opened alternately for an hour each, A first. How long does the tank take to fill?
Practise this conceptself-check · 3 quick reps

The same idea in a real exam question:

SSC CGL Tier II · 2024 · Tier II (CGL 2024), 20 Jan 2025 · Q12Moderate

Example 2 · Time and Work · Pipes and Cisterns

A tank when full can be emptied by an outlet pipe A in 5.6 hours, while an inlet pipe B can fill the same empty tank in 7 hours. If pipes A and B are turned on alternatively for 1 hour each starting with pipe A when the tank is full, how long will it take to empty the tank?

Counting whole cycles to the very end

Dividing 20 units by a net loss of 1 a cycle suggests 40 hours, but the emptying pipe clears the last 4 units on its own in hour 33. Step through the end turn by turn.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (2)

  • Inlets and outlets together

    A leak from two fill times

    leak alone=abb−a\text{leak alone} = \frac{ab}{b - a}
  • Pipes opened in turn

    Net change in one cycle

    net per cycle=inlet units−outlet units\text{net per cycle} = \text{inlet units} - \text{outlet units}

Watch out for (2)

Test yourself on Time and Work

10 past SSC CGL Tier II questions from this chapter, timed at 10 minutes and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.